4.6 Article

Study on Shrinkage in Alkali-Activated Slag-Fly Ash Cementitious Materials

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Benefits and drawbacks of using multiple shrinkage mitigating strategies on performance of fiber-reinforced mortar

Kamran Aghaee et al.

Summary: Shrinkage mitigating materials (SMM), such as expansive agent (EA), shrinkage reducing admixture (SRA), and superabsorbent polymer (SAP), have been studied for their efficiency in reducing shrinkage and cracking of concrete. This study investigates the effect of these materials on the mechanical properties and shrinkage of fiber-reinforced mortar (FRM) mixtures. The results suggest that a coupled system of EA and SRA is preferred, while high content of EA or SAP can have negative effects on the mechanical properties.

CEMENT & CONCRETE COMPOSITES (2022)

Article Chemistry, Physical

Strength Characteristics and Microstructure Analysis of Alkali-Activated Slag-Fly Ash Cementitious Material

Chenhui Zhu et al.

Summary: Modifying alkali-activated cementitious materials using fly ash and fine sand as components can reduce CO2 emissions and save natural resources and energy. The use of fly ash instead of slag powder lowers the flexural strength of alkali slag cement, while the strength of alkali slag cement mortar is less affected by the content of fine sand, except when it exceeds 30%. The hydration degree increases with time, and the density of the slurry decreases with increased fly ash or fine sand content.

MATERIALS (2022)

Article Construction & Building Technology

Experimental study on material ratio and strength performance of geopolymer-improved soil

Shengnian Wang et al.

Summary: Geopolymer binder is a green cementitious material with fast hardening, high strength, and acid-alkali corrosion resistance. It can improve soil compressive strength and stability when mixed with clay. The optimal mixing ratio of metakaolin and alkali-activator in the geopolymer binder is approximately 2:1, with a cost-optimal mixing ratio in clay soil of around 12%.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Experimental study on mechanical properties of fiber-reinforced and geopolymer-stabilized clay soil

Shengnian Wang et al.

Summary: Geopolymers are considered superior sustainable alkali-activated binders for soil improvement, and in this study, metakaolin-based geopolymer-stabilized clay soil with basalt fiber reinforcement showed improved compressive strength. The effectiveness of the fiber-matrix interaction in controlling the strength of FRGSCS was demonstrated, providing a parameter basis for its application and popularization.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Study of the properties of lime and cement mortars made from recycled ceramic aggregate and reinforced with fibers

A. Moron Barrios et al.

Summary: Through experimental analysis of mortars, it was found that the addition of fibers can improve the mechanical properties of the material and reduce shrinkage, which is beneficial for the use of recycled aggregates in mortar manufacturing. Carbon fiber has been shown to be the best performing reinforcing material in this statistical analysis.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Construction & Building Technology

Shrinkage behaviour, early hydration and hardened properties of sodium silicate activated slag incorporated with gypsum and cement

Jun Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Hydration products, internal relative humidity and drying shrinkage of alkali activated slag mortar with expansion agents

Zijian Jia et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Comparative study of the influence of three types of fibre in the shrinkage of recycled mortar

P. Saiz-Martinez et al.

MATERIALES DE CONSTRUCCION (2018)

Article Chemistry, Analytical

New System of Shrinkage Measurement through Cement Mortars Drying

Carlos Moron et al.

SENSORS (2017)

Article Construction & Building Technology

Shrinkage mitigation strategies in alkali-activated slag

Hailong Ye et al.

CEMENT AND CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Shrinkage mechanisms of alkali-activated slag

Hailong Ye et al.

CEMENT AND CONCRETE RESEARCH (2016)

Article Construction & Building Technology

Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages

N. K. Lee et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

Shrinkage compensation of alkali-activated slag concrete and microstructural analysis

Xiao-hui Yuan et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 1

Francesca Tittarelli et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 2

Francesca Tittarelli

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum

Antonio A. Melo Neto et al.

CEMENT & CONCRETE COMPOSITES (2010)

Article Construction & Building Technology

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

Cengiz Duran Atis et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Article Chemistry, Physical

Influence of Nucleation Seeding on the Hydration Mechanisms of Tricalcium Silicate and Cement

Jeffrey J. Thomas et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2009)

Article Construction & Building Technology

Effect of pore size distribution on drying shrinkage of alkali-activated slag concrete

F Collins et al.

CEMENT AND CONCRETE RESEARCH (2000)