☆ 4.6 Article

Tribological Aspects of Sheet Titanium Forming

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Automation & Control Systems

Extreme pressure and antiwear additives for lubricant: academic insights and perspectives

Haogang Li et al.

Summary: This article reviews the mechanisms and properties of extreme pressure (EP) and antiwear (AW) additives in boundary lubrication and discusses the advantages and disadvantages of traditional and nanoparticle additives. It also studies the influence of non-polar chain length on traditional additives and the effects of nanoparticle structure parameters, concentration, and media polarity on properties.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Friction and Wear Behavior of Deep Drawing Tools Using Volatile Lubricants Injected Through Laser-Drilled Micro-Holes

Gerd Reichardt et al.

Summary: In the deep drawing process, lubricants are essential to prevent wear and surface damage, but traditional options pose environmental and health risks, leading to research on a new system using liquid carbon dioxide and nitrogen gas introduced through micro-holes. Further investigations are focused on the lubrication medium's impact on tool wear.

JOM (2022)

添加到收藏夹

Review Biochemistry & Molecular Biology

Microalgae Biomass as a New Potential Source of Sustainable Green Lubricants

Leonardo I. Farfan-Cabrera et al.

Summary: This article reviews the characteristics of lubricants and the progress in using microalgae biomass to produce oils for lubrication. It also identifies potential microalgae strains and chemical modifications to their oils for various industrial applications.

MOLECULES (2022)

添加到收藏夹

Article Engineering, Mechanical

Application of solid lubricant for enhanced frictional efficiency of deep drawing process

R. B. Jivan et al.

Summary: The study investigated the impact of the combination of molybdenum disulphide and graphite on the friction reduction rate and process efficiency in deep drawing process. Results showed that this combination had a significant effect on reducing punching force.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Synergistic Study of Solid Lubricant Nano-Additives Incorporated in canola oil for Enhancing Energy Efficiency and Sustainability

Soumya Sikdar et al.

Summary: In recent years, research has shown that incorporating nanomaterials such as graphene nanoplatelet and hexagonal boron nitride in canola oil can significantly improve its tribological performance. By combining these nanoparticles in different ratios, positive synergies were observed in reducing friction and wear compared to traditional base oil. The formation of composite films and polishing mechanisms played a crucial role in enhancing the overall performance of the lubricant mixture.

SUSTAINABILITY (2022)

添加到收藏夹

Article Engineering, Mechanical

A novel current-carrying lubrication in electric hot incremental forming of Ti-6Al-4V titanium sheet

Zhengfang Li et al.

Summary: This study investigates the effect of a novel lubricant, WS2-oil mixture, on the surface defect of electric hot incremental forming. It finds that the graininess of WS2 has a more significant impact on lubrication compared to its concentration. Additionally, it discovers the importance of high-temperature adhesive wear and abrasive flow polishing in improving the surface smoothness of forming parts.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Numerical and Experimental Analysis of Titanium Sheet Forming for Medical Instrument Parts

Wojciech Wieckowski et al.

Summary: This paper analyzes the forming process of surgical instrument handles made of Grade 2 titanium sheets. Sheet metal forming technology ensures high strength and lightweight products. Replacing stainless steels with titanium reduces instrument weight and provides resistance to corrosive environments in surgeries. Numerical analysis and experimental verification were conducted to adapt the technological process to forming tool handles using titanium sheets. It was found that applying a blank holder in the first forming operation eliminates sheet wrinkling in the flange area. The shape and dimensional accuracy of the drawn part after trimming were sufficient, eliminating the need for the fourth forming operation. Lubricating with rapeseed oil and boric acid prevents galling of titanium and ensures uniform plastic strain distribution in the drawn part.

MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Exquisite Energy Savings at Cold Metal Forming of Threads through the Application of Polymers

Miroslav Piska et al.

Summary: One of the global problems today is energy production and distribution. As the human population grows, energy consumption also increases. The use of effective lubricants and tribological fluids in industry can reduce energy consumption. The application of polymers in forming technology is an important challenge, but it should meet European standards and environmental limitations.

POLYMERS (2022)

添加到收藏夹

Article Chemistry, Physical

Investigation of Surface Roughness in Incremental Sheet Forming of Conical Drawpieces from Pure Titanium Sheets

Tomasz Trzepiecinski et al.

Summary: The article presents the results of an analysis on the influence of incremental sheet forming process parameters on surface roughness of conical drawpieces made from pure titanium Grade 2 sheets. The study considered the variation of feed rate, spindle speed, and incremental step size as well as the direction of tool rotation. Analysis of variance and artificial neural networks were used to evaluate the sensitivity of the process parameters on surface roughness. The findings indicate that the roughness of the inner surface is independent of the roughness of the outer side, and the outer surface has a more uniform morphology with a greater profile height.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

Constitutive modeling of commercial pure titanium sheet based on non-associated flow rule and differential hardening

Jinjae Kim et al.

Summary: The commercial-pure titanium (CP-Ti) sheet is highly regarded in biomedical and aerospace industries for its lightweight, high strength, good formability, and corrosion resistance. This study developed a material model considering the differential hardening behavior and changing R-value of CP-Ti sheet, and used it to simulate a deep drawing process. The comparison results showed that the developed material model accurately predicted the mechanical behavior in forming simulations.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Experimental studies on viscosity, thermal and tribological properties of vegetable oil (kapok oil) with boric acid as an additive

Subramaniam Shankar et al.

Summary: The study aims to improve the performance of Kapok oil by adding boric acid, finding that the lubricating effect of a mixture of Kapok oil and 5% boric acid is the best, which helps reduce the global demand for petroleum-based lubricants.

MICRO & NANO LETTERS (2021)

添加到收藏夹

Review Chemistry, Physical

A review of the tribological and thermophysical mechanisms of bio-lubricants based nanomaterials in automotive applications

Krishna Chowdary et al.

Summary: This paper focuses on the friction and wear characteristics of bio-lubricants as alternative lubricants, as well as the impact of adding nanoparticles on their performance. It also discusses the potential and limitations of bio-oils in lubrication applications.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Physical

Foams of vegetable oils containing long-chain triglycerides

Yu Liu et al.

Summary: The experiment explores the possibility of stable oil foams produced from vegetable oils containing long-chain triglycerides and fat crystals. It demonstrates that oleogels can be aerated to create oil foams stabilized by fat crystals, resulting in non-draining, non-coarsening, and non-coalescing oil foams. The stability of the oil foams decreases upon heating near the melting point of the crystals.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Engineering, Mechanical

Dry friction under pressure variation of PACVD TiN surfaces on selected automotive sheet metals for the application in unlubricated metal forming

Peter Frohn-Soerensen et al.

Summary: The use of lubricants in production can have ecological and economic benefits, but can also lead to increased wear. By studying the relationship between friction coefficients and contact pressure, it is possible to optimize metal forming processes.

WEAR (2021)

添加到收藏夹

Article Chemistry, Physical

Modeling of Friction Phenomena of Ti-6Al-4V Sheets Based on Backward Elimination Regression and Multi-Layer Artificial Neural Networks

Tomasz Trzepiecinski et al.

Summary: This study applies multi-layer artificial neural networks and regression analysis to predict the coefficient of friction of titanium alloy sheets, with the best model being a multi-layer network with eight hidden neurons trained using the quasi-Newton algorithm.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Ultralow friction of copper by a green water-based lubricant containing phytic acid

Wenhao Chen et al.

Summary: Water can be used as an ecological lubricant base with properly developed additives to enhance its tribological properties. The use of IP6 aqueous solution shows excellent lubrication performance on copper surfaces.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of Lubricant Type on the Friction Behaviours and Surface Topography in Metal Forming of Ti-6Al-4V Titanium Alloy Sheets

Marcin Szpunar et al.

Summary: This research investigates the synergistic effect of different types of synthetic oils and their density on the coefficient of friction of titanium alloy sheets. Artificial neural networks were used to understand the complex relationship between various test parameters. Engine oil 10W-40 was found to be the least effective lubricant in reducing friction. The most favorable lubrication conditions were achieved with a type of oil with a low viscosity index and high kinematic viscosity.

MATERIALS (2021)

添加到收藏夹

Editorial Material Materials Science, Multidisciplinary

Titanium Alloys and Titanium-Based Matrix Composites

Maciej Motyka

METALS (2021)

添加到收藏夹

Review Chemistry, Physical

Overcoming friction and steps towards superlubricity: A review of underlying mechanisms

Himanshu Shekhar et al.

Summary: This review presents the advances and mechanisms of achieving superlubricity, focusing on atomic-scale friction dissipating mechanisms and models. Mechanisms for achieving superlubricity on both micro and macro scales have been discovered, with emphasis on their physical fundamentals.

APPLIED SURFACE SCIENCE ADVANCES (2021)

添加到收藏夹

Article Engineering, Civil

Sheet metal forming using environmentally benign lubricant

Wojciech Wieckowski et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Opportunities and Issues in the Application of Titanium Alloys for Aerospace Components

James C. Williams et al.

METALS (2020)

添加到收藏夹

Article Automation & Control Systems

The influence of self-lubricating coating during incremental sheet forming of TA1 sheet

Changxu Xu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Experimental Investigation of Formability and Surface Finish into Resistance Single-Point Incremental Forming of Ti-6Al-4V Titanium Alloy Using Taguchi Design

Mostafa Vahdani et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

添加到收藏夹

Article Automation & Control Systems

Electric hot incremental sheet forming of Ti-6Al-4V titanium, AA6061 aluminum, and DC01 steel sheets

Mostafa Vahdani et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Finite element modeling and validation of springback and stress relaxation in the thermo-mechanical forming of thin Ti-6Al-4V sheets

Eva-Lis Odenberger et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Tribological behaviors in titanium sheet and tube forming at elevated temperatures: evaluation and modeling

J. Ma et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Manufacturing

An Environmental and Cost Analysis of Stamping Sheet Metal Parts

Daniel R. Cooper et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A method for the systematic assessment of lubricant performance during superplastic sheet forming

M. Farrell et al.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

On the characteristics of titanium alloys for the aircraft applications

Paramjit Singh et al.

MATERIALS TODAY-PROCEEDINGS (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

THE EFFECT OF THE USE OF TECHNOLOGICAL LUBRICANTS BASED ON VEGETABLE OILS ON THE PROCESS OF TITANIUM SHEET METAL FORMING

W. Wieckowski et al.

ARCHIVES OF METALLURGY AND MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superlubricity between MoS2 Monolayers

He Li et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Mechanics

Numerical simulation of forming titanium drawn part

Janina Adamus et al.

MECCANICA (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

FUNDAMENTALS OF MANUFACTURING TECHNOLOGIES FOR AIRCRAFT ENGINE PARTS MADE OF TiAL BASED ALLOYS

W. Szkliniarz et al.

ARCHIVES OF METALLURGY AND MATERIALS (2016)

添加到收藏夹

Article Engineering, Civil

EBW titanium sheets as material for drawn parts

J. Adamus et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2015)

添加到收藏夹

Review Engineering, Mechanical

Tribology in metal forming at elevated temperatures

Kuniaki Dohda et al.

FRICTION (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

FORMING OF SPHERICAL TITANIUM CUPS FROM CIRCULAR BLANKS WITH CUTOUTS ON THE PERIMETER

P. Lacki et al.

ARCHIVES OF METALLURGY AND MATERIALS (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

EXPERIMENTAL AND THEORETICAL DETERMINATION OF FORMING LIMIT CURVE

J. Adamus et al.

ARCHIVES OF METALLURGY AND MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis of forming titanium welded blanks

Janina Adamus et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural aspects of superplasticity in Ti-6Al-4V alloy

Maciej Motyka et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Advance and trend of friction study in plastic forming

Dan Wang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

添加到收藏夹

Article Green & Sustainable Science & Technology

Dry Metal Forming: Definition, Chances and Challenges

Frank Vollertsen et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Civil

A study of the impact of anti-adhesive coatings on the sheet-titanium forming processes

J. Adamus et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2013)

添加到收藏夹

Article Engineering, Mechanical

Tribological behaviour of DLC coatings for sheet metal forming tools

A. Ghiotti et al.

WEAR (2011)

添加到收藏夹

Article Automation & Control Systems

Electric hot incremental forming of Ti-6Al-4V titanium sheet

Guoqiang Fan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Mechanical

On the friction and wear performance of boric acid lubricant combinations in extended duration operations

Pushkarraj Deshmukh et al.

WEAR (2006)

添加到收藏夹

Article Engineering, Industrial

A technical note on an experimental device to measure friction coefficient in sheet metal forming

L Fratini et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)

添加到收藏夹

Article Materials Science, Coatings & Films

Tribology of dry deep-drawing of various metal sheets with use of ceramics tools

S Kataoka et al.

SURFACE & COATINGS TECHNOLOGY (2004)

添加到收藏夹

Article Engineering, Industrial

Tribological approaches for green metal forming

ZG Wang

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)

添加到收藏夹

Article Materials Science, Coatings & Films

Influence of EP and AW additives on the tribological behaviour of hard low friction coatings

B Podgornik et al.

SURFACE & COATINGS TECHNOLOGY (2003)

添加到收藏夹

Article Engineering, Industrial

Multi-stage cold deep drawing of long pure titanium cups using coloured sheets for prevention of seizure

K Mori et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.