☆ 4.6 Article

Feldspar-Modified Methacrylic Composite for Fabrication of Prosthetic Teeth

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Biomedical

Characterization of various acrylate based artificial teeth for denture fabrication

Nawshad Muhammad et al.

Summary: This study investigated the properties of various commercially available PMMA-based artificial teeth, including chemical analysis, morphology, thermal analysis, and mechanical properties. Different types of artificial teeth showed distinct mechanical and thermal properties, which may be attributed to the differences in PMMA content and fillers.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2022)

添加到收藏夹

Article Chemistry, Physical

Mechanical Properties, Cytotoxicity, and Fluoride Ion Release Capacity of Bioactive Glass-Modified Methacrylate Resin Used in Three-Dimensional Printing Technology

Zbigniew Raszewski et al.

Summary: This study evaluated the mechanical properties, cytotoxicity, and fluoride ion release capacity of 3D-printed dental resins modified with bioactive glass. The modified resins showed desirable bioactive properties and the potential ability to release fluoride ions in the oral cavity environment. However, there was a mild decrease in physical properties and mild cytotoxicity with direct contact with human cells.

MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Denture Acrylic Resin Material with Antibacterial and Protein-Repelling Properties for the Prevention of Denture Stomatitis

Salwa Omar Bajunaid et al.

Summary: This study investigated the incorporation of MPC and DMAHDM into a denture base material for the treatment of denture stomatitis. The results demonstrated that the dual incorporation of MPC and DMAHDM significantly reduced the adherence of C. albicans and could potentially reduce the prevalence of denture stomatitis. However, the addition of these bioactive agents reduced the flexural strength of the material and had some impact on surface roughness.

POLYMERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reinforcing Poly(methyl methacrylate) with Bacterial Cellulose Nanofibers Chemically Modified with Methacryolyl Groups

Hiroyuki Kono et al.

Summary: In this study, nanofibrillated bacterial cellulose (NFBC) was successfully used as a nanofiller to improve the mechanical properties of poly(methyl methacrylate) (PMMA) while maintaining its high transparency, through chemical surface modification. The addition of only 0.10 wt% of NFBC increased the tensile strength and Young's modulus of the composite by factors of 1.6 and 1.8, respectively, without sacrificing the maximum elongation rate. Interaction involving the organic functional groups of the surface-modified NFBC was found to be crucial for reinforcing PMMA.

NANOMATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative Evaluation of Compressive Bond Strength between Acrylic Denture Base and Teeth with Various Combinations of Mechanical and Chemical Treatments

Mohammed E. Sayed et al.

Summary: This study assessed the impact of various surface treatments on the bond strength between denture teeth and acrylic denture base resin. The results identified the optimal method for bonding and highlighted the differences in effectiveness between different treatments. The findings provide guidance for manufacturing companies to enhance bond strength in artificial teeth while maintaining aesthetics.

COATINGS (2021)

添加到收藏夹

Article Chemistry, Physical

The Impact of Contaminating Poly (Methyl Methacrylate) (PMMA) Bone Cements on Their Compressive Strength

Jakub Szabelski et al.

Summary: This study analyzes the impact of doping bone cement with saline, finding that the static compressive strength parameters of the cement may greatly improve or significantly worsen depending on the degree of saline doping. A limit value of 2% saline admixture was estimated, beyond which there were no statistically significant differences observed in cement strength.

MATERIALS (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Bond Strength of Denture Teeth to Heat-Cured, CAD/CAM and 3D Printed Denture Acrylics

Joanne Jung Eun Choi et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Influence of silanized silica and silanized feldspar addition on the mechanical behavior of polymethyl methacrylate resin denture teeth

Zbigniew Raszewski et al.

JOURNAL OF PROSTHETIC DENTISTRY (2020)

添加到收藏夹

Review Polymer Science

Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update

Muhammad Sohail Zafar

POLYMERS (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Comparison of shear bond strengths of different types of denture teeth to different denture base resins

Vladimir Prpic et al.

JOURNAL OF ADVANCED PROSTHODONTICS (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Investigation of Impact Strength, Water Sorption and Cytotoxicity of Denture Base Resin Reinforced with Polypropylene Fiber: In Vitro Study

Faik Tugut et al.

JOURNAL OF ADVANCED ORAL RESEARCH (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Incorporation of surface-modified hydroxyapatite into poly(methyl methacrylate) to improve biological activity and bone ingrowth

Kuan-Lin Ku et al.

ROYAL SOCIETY OPEN SCIENCE (2019)

添加到收藏夹

Article Orthopedics

Effect of Polymethylmethacrylate-Hydroxyapatite Composites on Callus Formation and Compressive Strength in Goat Vertebral Body

I. S. Komang-Agung et al.

MALAYSIAN ORTHOPAEDIC JOURNAL (2018)

添加到收藏夹

Article Medicine, General & Internal

A Comparative Study of the Mechanical Properties of Clear and Pink Colored Denture Base Acrylic Resins

R. Sushma et al.

ANNALS OF AFRICAN MEDICINE (2018)

添加到收藏夹

Article Spectroscopy

Quantification of minerals from ATR-FTIR spectra with spectral interferences using the MRC method

Francisco Bosch-Reig et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

The bond between acrylic resin denture teeth and the denture base: recommendations for best practice

D. R. Radford et al.

BRITISH DENTAL JOURNAL (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Structural modification of poly (methyl methacrylate) due to electron irradiation

Pragya Tiwari et al.

MEASUREMENT (2014)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of pre-processing methods on bond strength between acrylic resin teeth and acrylic denture base resin

Murat Kurt et al.

GERODONTOLOGY (2012)

添加到收藏夹

Article Chemistry, Physical

Mechanistical studies on the electron-induced degradation of polymethylmethacrylate and Kapton

Courtney P. Ennis et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2010)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

ABRASION WEAR RESISTANCE OF DIFFERENT ARTIFICIAL TEETH OPPOSED TO METAL AND COMPOSITE ANTAGONISTS

Pamela Carbone Mello et al.

JOURNAL OF APPLIED ORAL SCIENCE (2009)

添加到收藏夹

Article Biochemistry & Molecular Biology

A simple and established method of tissue culture of human gingival fibroblasts for gingival augmentation

Jolanta Saczko et al.

FOLIA HISTOCHEMICA ET CYTOBIOLOGICA (2008)

添加到收藏夹

Article Toxicology

Internalization, Cytotoxicity, Apoptosis, and Tumor Necrosis Factor-alpha Expression in Rat Alveolar Macrophages Exposed to Various Dusts Occurring in the Ceramics Industry

G. Attik et al.

INHALATION TOXICOLOGY (2008)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Compositional characteristics and hardness of acrylic and composite resin artificial teeth

Paola G. Loyaga-Rendon et al.

JOURNAL OF PROSTHETIC DENTISTRY (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.