4.6 Article

Cross-Linking, Morphology, and Physico-Mechanical Properties of GTR/SBS Blends: Dicumyl Peroxide vs. Sulfur System

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Composites

Thermoplastic elastomers based on recycled high-density polyethylene/ground tire rubber/ethylene vinyl acetate: Effect of ground tire rubber regeneration on morphological and mechanical properties

Ali Fazli et al.

Summary: This study investigates the properties of different types of regenerated recycled rubbers to produce thermoplastic elastomers based on recycled high-density polyethylene. The research found that higher regeneration degrees improve the plasticity and processability of ground tire rubber, and the addition of ethylene vinyl acetate as a compatibilizer enhances adhesion and rubber-like properties.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

Article Materials Science, Composites

Manifestation of the silicate filler additives and electron beam irradiation on properties of SBR/devulcanized waste tire rubber composites for floor tiles applications

Khaled F. El-Nemr et al.

Summary: By adding silicate fillers and irradiating with electron beams, mechanical properties of composites can be significantly improved, especially enhancing ultimate tensile strength, modulus, and cross-link density. Among the silicate fillers, micaosilica showed the best performance in floor tile application.

POLYMER COMPOSITES (2022)

Article Chemistry, Physical

Processing and Mechanical Properties of Highly Filled PP/GTR Compounds

Artur Kosciuszko et al.

Summary: The study explored the feasibility of processing highly filled PP/GTR compounds using injection molding. It was found that the presence of GTR filler significantly reduced the production cycle time. The modifier used improved the mechanical properties of the polypropylene/rubber composite.

MATERIALS (2022)

Article Polymer Science

Structure and properties of blends based on vulcanized rubber waste and styrene-butadiene-styrene thermoplastic elastomer

Maria Daniela Stelescu et al.

Summary: This paper presents the characterization and processing of post-consumer vulcanized rubber waste as a filler in polymer composites. The influence of methods to improve compatibility on the characteristics of the composites was analyzed. The study found that vulcanized rubber powder acted as an elastic filler, leading to an increase in hardness and elasticity.

JOURNAL OF RUBBER RESEARCH (2022)

Article Polymer Science

Calcium-Lignosulfonate-Filled Rubber Compounds Based on NBR with Enhanced Physical-Mechanical Characteristics

Jan Kruzelak et al.

Summary: This study investigated the effects of glycerine content on the curing process and properties of rubber compounds. The results showed that glycerine had a strong plasticizing effect on rubber and caused changes in the shape of the curing isotherms. The application of glycerine improved the homogeneity and dispersion of lignosulfonate in the rubber compounds, leading to enhanced physical-mechanical properties of the vulcanizates.

POLYMERS (2022)

Article Polymer Science

Compatibilized thermoplastic elastomers based on highly filled polyethylene with ground Tire rubber

Shuang Liu et al.

Summary: Thermoplastic elastomers based on ground tire rubber are effective for recycling waste tire rubber. This study focuses on optimizing parameters such as rubber concentration and dispersion, as well as crosslinking degree, to produce valuable TPE. The addition of a compatibilizer improved the interfacial interactions between the rubber and plastic, resulting in improved mechanical properties and processability for the TPE.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Article Construction & Building Technology

Reaction mechanism and rheological properties of waste cooking oil pre-desulfurized crumb tire rubber/SBS composite modified asphalt

Mengzhen Zhao et al.

Summary: The study developed ODR/SBS composite modified asphalt, with analysis through FTIR, GPC, and FM to elucidate the reaction mechanism of the composite modification. The results showed the formation of a continuous and homogeneous microstructure with increased molecular weight, reduced phase segregation, and enhanced rutting and cracking resistance, contributing to improved performance of the modified asphalt.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Review Materials Science, Multidisciplinary

Review on the Use of Alternative Carbon Sources in EAF Steelmaking

Thomas Echterhof

Summary: In the future, steelmaking in the electric arc furnace will be crucial for reducing CO2 emissions in the iron and steel industry, but carbon introduction will still be necessary to improve energy efficiency. To achieve emission reduction goals, alternative carbon sources such as biomass or recycled rubber and plastics will be needed to replace fossil materials.

METALS (2021)

Article Polymer Science

Processing, Performance Properties, and Storage Stability of Ground Tire Rubber Modified by Dicumyl Peroxide and Ethylene-Vinyl Acetate Copolymers

Paulina Wisniewska et al.

Summary: This study investigated the preparation method and performance of ground tire rubber modified with ethylene-vinyl acetate copolymers. The modified rubber materials demonstrated good tensile strength, elongation at break, storage stability, and processability.

POLYMERS (2021)

Article Polymer Science

The effect of adding devulcanized rubber on the thermomechanical properties of recycled polypropylene

Pamela Sierra Garcia et al.

Summary: This study investigated the effect of adding devulcanized rubbers on recycled polypropylene, showing that devulcanized rubbers improved the mechanical properties of PPr and enhanced its adhesion to rubber, impacting the fracture mechanisms of PPr.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Engineering, Chemical

Effects of Posttreatments on the Storage Stability of Reclaimed Rubber

Na Lu et al.

Summary: This study investigated the devulcanization process of sulfur-cured waste tire rubber powder under the application of an activator and aromatic oil, as well as the effects of storage time at room temperature on the properties and structure of reclaimed rubber. The results indicated that the properties of reclaimed rubber were not significantly affected by different postprocessing operations, but were notably influenced by the storage time, with changes in Mooney viscosity, sol fraction, crosslink density, and storage modulus observed with increasing storage time.

ADVANCES IN POLYMER TECHNOLOGY (2021)

Article Chemistry, Physical

GTR/NBR/Silica Composites Performance Properties as a Function of Curing System: Sulfur versus Peroxides

Lukasz Zedler et al.

Summary: The study found that increasing the content of highly dispersive silica can improve the mechanical properties of GTR/NBR blends, with sulfur-based systems showing better cross-linking efficiency, while organic peroxide systems exhibit superior tensile properties.

MATERIALS (2021)

Article Materials Science, Composites

On the Use of Mechano-Chemically Modified Ground Tire Rubber (GTR) as Recycled and Sustainable Filler in Styrene-Butadiene Rubber (SBR) Composites

Javier Araujo-Morera et al.

Summary: The surface modification of GTR through cryo-grinding and chemical treatment, followed by its incorporation into rubber composites, has resulted in improved mechanical performance of the composite material.

JOURNAL OF COMPOSITES SCIENCE (2021)

Proceedings Paper Materials Science, Multidisciplinary

Study of the distribution of rubber particles in ground tire rubber/polypropylene blends

Alberto Basso et al.

Summary: This study investigates the feasibility of utilizing ground tire rubber (GTR) as feedstock for injection molding by blending it with polypropylene (PP). It found that the uneven dispersion of rubber particles in the blends affects the surface finishing and mechanical properties of the material.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Polymer Science

Microwave devulcanization of ground tire rubber and applicability in SBR compounds

Daniel Abel Simon et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Article Materials Science, Multidisciplinary

Incorporation of a recycled rubber compound from the shoe industry in polystyrene: Effect of SBS compatibilizer content

Carlos Bruno Barreto Luna et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2020)

Review Materials Science, Composites

Super-hydrophobic and super-oleophilic surface based on high-density polyethylene/waste ground rubber tire powder thermoplastic elastomer

Yujiao Shi et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2020)

Review Materials Science, Composites

Recycling Waste Tires into Ground Tire Rubber (GTR)/Rubber Compounds: A Review

Ali Fazli et al.

JOURNAL OF COMPOSITES SCIENCE (2020)

Article Construction & Building Technology

Influence of recycled tire polymer fibers on concrete properties

Ana Baricevic et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Construction & Building Technology

Thermal analysis on the interactions among asphalt modified with SBS and different degraded tire rubber

Raqiqa Tur Rasool et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Engineering, Environmental

Devulcanization of waste rubber powder using thiobisphenols as novel reclaiming agent

Xiaojie Zhang et al.

WASTE MANAGEMENT (2018)

Article Multidisciplinary Sciences

Production, use, and fate of all plastics ever made

Roland Geyer et al.

SCIENCE ADVANCES (2017)

Review Construction & Building Technology

Recent developments in the application of chemical approaches to rubberized asphalt

Shifeng Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Polymer Science

Reclaiming waste tire rubber by an irradiation technique

Mahdieh Molanorouzi et al.

POLYMER DEGRADATION AND STABILITY (2016)

Article Materials Science, Characterization & Testing

Interfacially modified LDPE/GTR composites with non-polar elastomers: From microstructure to macro-behavior

Krzysztof Formela et al.

POLYMER TESTING (2015)

Article Polymer Science

Characterization of styrene butadiene rubber and microwave devulcanized ground tire rubber composites

Fazliye Karabork et al.

JOURNAL OF POLYMER ENGINEERING (2014)

Article Polymer Science

Recycling ground tire rubber (GTR) scraps as high-impact filler of in situ produced polyketone matrix

Roberta Sulcis et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2014)

Article Green & Sustainable Science & Technology

Use of scrap tire rubber in place of SBS in modified asphalt as an environmentally correct alternative for Brazil

Adao Francisco de Almeida Junior et al.

JOURNAL OF CLEANER PRODUCTION (2012)

Article Thermodynamics

Vulcanization kinetics study of natural rubber compounds having different formulation variables

T. H. Khang et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2012)

Article Metallurgy & Metallurgical Engineering

Reduction of FeO in EAF Steelmaking Slag by Blends of Metallurgical Coke and End-of-Life Tyre

James R. Dankwah et al.

STEEL RESEARCH INTERNATIONAL (2012)

Article Engineering, Environmental

Investigation of the decomposition reaction and dust explosion characteristics of crystalline dicumyl peroxide

Kai-Tai Lu et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2010)

Article Materials Science, Characterization & Testing

Compatibilizing thermoplastic/ground tyre rubber powder blends: Efficiency and limits

R. Sonnier et al.

POLYMER TESTING (2008)

Article Polymer Science

Blending LLDPE and ground rubber tires

Jun Qin et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2008)

Article Polymer Science

Study of thermal degradation kinetics of elastomeric powder (ground tire rubber)

A. Nadal Gisbert et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2008)

Article Engineering, Environmental

Construction of a test embankment using a sand-tire shred mixture as fill material

Sungmin Yoon et al.

WASTE MANAGEMENT (2006)

Article Polymer Science

Effect of ground rubber powder and devulcanizates on the properties of natural rubber compounds

SY Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2005)

Article Polymer Science

Ground tire rubber (GTR) reclamation: virgin rubber/reclaimed GTR (re)vulcanizates

O Grigoryeva et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2004)

Article Engineering, Environmental

Complete study of the pyrolysis and gasification of scrap tires in a pilot plant reactor

JA Conesa et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2004)

Article Engineering, Environmental

Rheological characteristics of ground tire rubber-modified bitumens

FJ Navarro et al.

CHEMICAL ENGINEERING JOURNAL (2002)

Article Polymer Science

LDPE-based thermoplastic elastomers containing ground tire rubber with and without dynamic curing

CR Kumar et al.

POLYMER DEGRADATION AND STABILITY (2002)