4.5 Article

Recent Advances in the Drying Process of Grains

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Mathematical model and energy utilization evaluation of a coaxial impinging stream drying system for parboiled paddy

Ratiya Thuwapanichayanan et al.

Summary: A mathematical model was developed to predict the energy consumption and effects of operating parameters on the impinging stream drying technique. Simulation results showed that this drying technique has efficient drying rate and energy saving effect under certain conditions.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Coupling effect of dehydration characteristics and microstructure of broad bean seeds under low-temperature vacuum environment

Xilong Zhang et al.

Summary: This study used a scanning electron microscope to investigate the microstructural changes in broad bean seeds under different temperature and humidity conditions. The results showed that the distribution of cell morphology changed significantly with time and temperature. Higher temperatures led to more active cell contraction, but cell size was primarily influenced by humidity while cell shape was influenced by both temperature and humidity.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Effect of modeling simplifications on behavior and computational cost for simulation of fixed bed wheat drying process

Rodolfo de Mattos et al.

Summary: This study focuses on the simulation of a fixed bed drying process for wheat grains. A rigorous model based on Fick's law was developed and validated against experimental results. The impact of simplifying assumptions on outputs and computational burden was investigated. Neglecting internal temperature gradients, the external mass transfer resistance, and the difference between grain and air temperatures saved 18% of execution time compared to the more rigorous model. However, simulations using a simpler model that only considered the average moisture content for the grains resulted in poorer predicted drying rates.

DRYING TECHNOLOGY (2022)

Article Biotechnology & Applied Microbiology

How much do process parameters affect the residual quality attributes of dried fruits and vegetables for convective drying?

Daniel Onwude et al.

Summary: Drying processes significantly reduce the nutritional content of dried plant-based foods, with up to a 70% reduction in vitamin C, carotenoids, and phenolic content of dried fruits and vegetables compared to fresh produce. Therefore, factors other than residual micronutrient concentration, such as drying time, energy consumption, and sensory properties, should be considered when selecting the most appropriate drying method.

FOOD AND BIOPRODUCTS PROCESSING (2022)

Article Food Science & Technology

Effect of infrared and microwave treatments alone and in combination on the functional properties of resulting flours from bambara groundnut seeds

Peter Mukwevho et al.

Summary: The study showed that heat treatment significantly affected the functional properties of bambara groundnut flour, including reductions in water and nitrogen solubility indices, promotion of starch pre-gelatinisation, and protein denaturation. Different moisture levels and treatment times resulted in varying degrees of impact on the properties of the flour.

LWT-FOOD SCIENCE AND TECHNOLOGY (2022)

Article Engineering, Chemical

A neural network model used in continuous grain dryer control system

Yi Jin et al.

Summary: This paper describes the design of an intelligent control system using BPNN to control the grain dryer, which was optimized using computer simulation technology. The results showed that the system has strong stability and good noise handling capability.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Experimental and numerical study of intermittent drying of rough rice in a combined FIR-dryer

Mojtaba Nosrati et al.

Summary: Based on experimental data, moisture variation and fissure formation of rice kernels during multi-stage intermittent drying (MSID) were simulated and analyzed. The critical value of 10% d.b. mm(-1) was identified as an index for suitable drying and tempering duration. It was recommended to select intermittent drying duration and tempering ratio to ensure the moisture content gradient (MCG) does not exceed the critical level.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Utilization efficiency of microwave energy for granular food in continuous drying: From propagation properties to technology parameters

Lei Wang et al.

Summary: This study investigated the utilization efficiency of microwave energy (UEME) and the effects of technology parameters on energy consumption of food materials during the microwave drying process. Results show that optimal microwave absorption and drying uniformity can be achieved within a certain thickness range, highlighting the importance of continuous movement and ventilation in promoting UEME.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Energy, exergy, and milling performance of parboiled paddy: an industrial LSU dryer

Md. Azadul Islam et al.

Summary: The research investigated the drying of paddy in industrial LSU dryers in major rice processing areas in Bangladesh, focusing on drying characteristics, energy and exergy analysis, and drying efficiency. Results showed drying time of 7.0-10.0 hours, with energy analysis indicating varied specific electrical and thermal energy, and drying efficiency ranging from 50.30% to 59.80%. Exergy efficiency ranged from 43.63% to 67.21%, while head rice yield varied between 50% and 54%. Research suggests potential for improving energetic, exergetic performance and product quality.

DRYING TECHNOLOGY (2022)

Article Energy & Fuels

Effects of drying temperatures and storage conditions on the levels of lipids and starches in corn grains for yield ethanol industry

Paulo Carteri Coradi et al.

Summary: The study revealed that drying corn grains at 40 degrees Celsius and storing them at 15 degrees Celsius can help maintain quality and positively influence ethanol production. Adverse environmental conditions may impact cell tissues in grains, reducing lipid and starch content, as well as ethanol yield.

BIOFUELS-UK (2022)

Article Engineering, Chemical

Drying of soybean grains with direct-fired furnace using wood chips: Performance, quality and polycyclic aromatic hydrocarbons

Wellytton Darci Quequeto et al.

Summary: The study evaluated the performance of soybean grain drying using a furnace dryer fed with eucalyptus chips, finding an efficiency of 75.61% and a fuel consumption of 21.78 kg per ton of dry grains. The quality of soybeans was not compromised after drying, with PAH concentrations lower than EU regulations. Drying conditions influenced the formation of PAHs in soybeans.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Modeling of heat and mass transfer in fluidized bed dryers using the volumetric heat transfer coefficient. Part 2: calculation algorithm based on the heat and mass transfer model

Viktor Szabo et al.

Summary: This study focused on the heat and mass transfer model in fluidized bed drying and developed an algorithm based on this model. The simulation results were validated using experimental data, revealing the significant impact of the method for determining the logarithmic temperature difference on drying parameters and desorption zone height.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Alternative economic and shortened method for the production of dried germinated rice

Asadayuth Mitsiri et al.

Summary: Germination of rice causes chalkiness on the surface of the kernel, which can be effectively eliminated by steaming before drying. The use of high-temperature hot air in a fluidized bed dryer showed optimal performance in removing chalkiness, with higher water evaporation capacity and lower energy consumption achieved at higher feed rates, bed depths, and drying temperatures. Storage duration also influenced the texture and quality of the cooked rice, with the recommended conditions being to store the germinated paddy for 1 month and dry at approximately 130C for premium quality and cost efficiency.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Performance evaluation of a non-equilibrium model for low temperature grain drying and simulation of seasonal dryer operation

Adam Epstein et al.

Summary: Low temperature, fixed bed grain drying was studied as a substitute for high temperature drying. Drying data was collected in an on-farm bin drying system over three harvest seasons. A one-dimensional transient model accurately predicted most aspects of the drying process. Preliminary calculations showed the potential benefits of a heat pump as a heat source using typical meteorological year data, indicating that greenhouse gas emissions could be reduced by as much as 90% compared to high temperature fossil fuel-based drying.

DRYING TECHNOLOGY (2022)

Article Energy & Fuels

Mathematical modeling and experimental studies on a dual inclined oscillating bed with double pass solar dryer for drying of non-parboiled paddy grains

G. P. Arul et al.

Summary: This article presents the mathematical modeling of a dual inclined oscillating bed with double-pass solar dryer for drying non-parboiled paddy grains using hot air from a double-pass flat plate solar collector. Experimental results show a correlation between the physical model and predicted values, with low average error and standard deviation for moisture content of dried paddy grains and collective mass of dried grains received from the dryer.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Article Engineering, Chemical

Energetic and exergetic investigation of a mixed flow dryer: A case study of maize grain drying

Md. Hasan Tarek Mondal et al.

Summary: This paper investigates the energy and exergy performance of a mixed flow dryer for drying maize grain, analyzing the energy utilization ratio and exergy efficiency at different drying temperatures and air velocities. The research shows varying energy efficiency and exergetic improvement potential with increasing drying temperature, with model equations developed to illustrate the energetic and exergetic parameters.

DRYING TECHNOLOGY (2021)

Article Engineering, Chemical

Continuous microwave drying of germinated brown rice: Effects of drying conditions on fissure and color, and modeling of moisture content and stress inside kernel

Liuyang Shen et al.

Summary: The study demonstrated that in a continuous microwave dryer, the temperature and moisture content of the finally dried GBR were uniform, with most kernels having mild to moderate fissures and a significant increase in the golden yellow color index. Appropriate microwave drying conditions can promote the formation of suitable fissures and golden yellow color appearance for GBR.

DRYING TECHNOLOGY (2021)

Article Engineering, Chemical

Physical and physiological quality of intermittent soybean seeds drying in the spouted bed

R. C. Brito et al.

Summary: This study aimed to analyze the physical and physiological quality of intermittent soybean seeds drying in the spouted bed. Testing mechanical damages and physiological properties, it found that intermittent drying with shorter periods of reduced air flow can provide lower seed deterioration, suggesting potential for further research in this area.

DRYING TECHNOLOGY (2021)

Article Engineering, Chemical

Starch gelatinization and drying of paddy using microwave rotary drum dryer: Optimization, kinetics, and cooking studies

Gitanjali Behera et al.

Summary: This study optimized the process of microwave-assisted starch gelatinization, and found suitable power density, treatment time, and water application rate. By drying paddy using microwave, it was observed that drying rates increased with an increase in power density, and microwave drying had lower energy consumption and higher head rice yield compared to hot air drying.

DRYING TECHNOLOGY (2021)

Article Engineering, Chemical

Investigation of rough rice drying in fixed and fluidized bed dryers utilizing dehumidified air as a drying agent

Kaushik Luthra et al.

Summary: The study found that air dehumidification using silica gel can effectively reduce the risk of rice deterioration in high humidity environments, with the fluidized bed dryer performing better than the fixed bed, removing around 1.5% more moisture. During the rice drying process, about 87% to 90% of the moisture was removed within the first 30 minutes.

DRYING TECHNOLOGY (2021)

Article Engineering, Chemical

Effect of drying schemes using superheated-steam and hot-air as drying media on the quality of parboiled chalky rice compared to conventional parboiling

Weerachet Jittanit et al.

Summary: The study demonstrates that hot water soaking combined with multi-stage intermittent drying technique can improve head-rice yields of chalky rice while maintaining rice texture, reducing rice hardness. The quality of parboiled rice products produced using this method is comparable or superior to that from conventional methods.

DRYING TECHNOLOGY (2021)

Article Thermodynamics

Experimental and numerical study on drying behavior of CORN grain

Emel Celik et al.

Summary: A laboratory scale test prototype of tower type grain dryer was installed to determine the most suitable model for the control system through experimental corn drying tests and curve fitting analysis. Midilli model was found to be the most suitable for control of industrial dryers based on the experimental data and comparisons with literature results.

HEAT AND MASS TRANSFER (2021)

Review Agronomy

Value of Wholegrain Rice in a Healthy Human Nutrition

Marina Carcea

Summary: Brown rice, as a wholegrain cereal, has beneficial effects on human health by reducing the risk of metabolic disorders, cardiovascular diseases, and certain types of cancer. Despite its health benefits, white rice is preferred due to reasons such as appearance, taste, palatability, ease of cooking, and tradition.

AGRICULTURE-BASEL (2021)

Article Engineering, Chemical

CFD simulation of solar grain dryer

Anand Chavan et al.

Summary: A compact solar grain dryer design is proposed and optimized for higher energy efficiency in this study. Various designs were tested through CFD simulations and the hot air recirculation as well as the optimization of solar fan size and location were performed. Two dryer designs, one without fins and the other with fins, were ultimately proposed.

DRYING TECHNOLOGY (2021)

Review Chemistry, Applied

Cereal processing waste, an environmental impact and value addition perspectives: A comprehensive treatise

Gul Hassan et al.

Summary: Physico-chemical and biological methods have great potential for treating cereal processing wastes, with physicochemical methods reducing sludge formation and biological methods being more efficient and cost-effective.

FOOD CHEMISTRY (2021)

Review Entomology

Grain storage systems and effects of moisture, temperature and time on grain quality-A review

Valmor Ziegler et al.

Summary: Global grain production is increasing annually, emphasizing the importance of investment and management in warehouses. Ensuring product quality through scientific research and standardized management is crucial. This bibliographic review outlines existing storage systems, care procedures, and research efforts in grain storage to maintain good quality.

JOURNAL OF STORED PRODUCTS RESEARCH (2021)

Review Food Science & Technology

Recent advances in assessing qualitative and quantitative aspects of cereals using nondestructive techniques: A review

Muhammad Zareef et al.

Summary: Cereals are important staple food globally, and their quality attributes are attracting more attention from nutritionists and scientists. Nondestructive techniques, such as near-infrared (NIR), infrared (IR), Raman spectroscopy, and fluorescence spectroscopy, along with colorimetric sensor array (CSA), have been introduced as promising tools for quality, authenticity, and discrimination of cereals. Chemometrics based on artificial intelligence and machine learning are also highlighted in this review article, which also addresses challenges in cereal processing that need further investigation.

TRENDS IN FOOD SCIENCE & TECHNOLOGY (2021)

Review Food Science & Technology

The potential of fermentation on nutritional and technological improvement of cereal and legume flours: A review

S. Garrido-Galand et al.

Summary: There is a growing demand for vegetable protein sources as an alternative to animal protein due to environmental sustainability and lower risk of cardiovascular diseases. Legumes, cereals, and seeds are good sources of protein, dietary fiber, and antioxidants. Fermentation processes can enhance the nutritional and functional properties of these foods.

FOOD RESEARCH INTERNATIONAL (2021)

Article Food Science & Technology

Impact of different drying methods on the drying time, energy, and quality of green peas

Mohammad Kaveh et al.

Summary: Comparing seven drying methods for green peas, it was found that freeze drying (FD) is the best in preserving product quality but also the most expensive. High-quality dried green peas can also be obtained using the hot air-microwave (HA-MW) method, with relatively lower energy consumption and shorter drying time.

JOURNAL OF FOOD PROCESSING AND PRESERVATION (2021)

Article Agronomy

An empirical-mathematical modelling approach to explore the drying kinetics of cereals under variable heat supply using the stitched method

Alexander Ostrikov et al.

Summary: This paper presents an empirical-mathematical modeling approach to study the drying kinetics of cereals under variable heat supply, allowing for regulation of product layer height in different zones and control of drying process with minimal energy consumption. The proposed model provides temperature distribution in the grain layer and establishes permissible thermal-humidity conditions for drying cereals.

ACTA AGRICULTURAE SCANDINAVICA SECTION B-SOIL AND PLANT SCIENCE (2021)

Article Agronomy

Relationship and Distribution of In-Field Dry-Down and Equilibrium in Maize Grain Moisture Content

Shang Gao et al.

Summary: The study observed the process and final moisture content of sixteen maize hybrids after drying, using the Guggenheim-Anderson-de Boer (GAB) model to evaluate the relationship between field M-eq and final MC. It was found that the MC reached a stable level after a long dry-down period in the field, indicating an equilibrium between the grain and the atmosphere.

AGRICULTURAL AND FOREST METEOROLOGY (2021)

Review Engineering, Chemical

Hybrid drying of food and bioproducts: a review

Ching Lik Hii et al.

Summary: Drying is critical in food and bioproduct processing, and hybrid drying as a new technique offers advantages such as better efficiency and product quality. Research on hybrid drying can contribute to the development of sustainable and efficient drying processes.

DRYING TECHNOLOGY (2021)

Article Engineering, Chemical

Evaluating the heat and mass transfer effective coefficients during the convective drying process of paddy (Oryza sativa L.)

Iman Golpour et al.

Summary: This study investigated heat and mass transfer parameters of a variety of paddy named Fajr during thin layer convective drying. Mathematical equations were developed to adjust the experimental data obtained. The results showed that the developed model satisfactorily fit the behavior of paddy drying, aiding in determining suitable operating conditions for energy saving.

JOURNAL OF FOOD PROCESS ENGINEERING (2021)

Article Entomology

Enviro-economical feasibility of groundnut drying under greenhouse and indoor forced convection hot air dryers

Mahesh Kumar et al.

Summary: This study compared the drying cost of groundnut under different modes and found that greenhouse drying modes have lower cost. Critical parameters such as EPBT, CO2 mitigation, and carbon credit earn were evaluated to study the cost analysis of a greenhouse dryer. EPBT was found to be about 1.66, 1.72, and 4.67 years for different drying modes.

JOURNAL OF STORED PRODUCTS RESEARCH (2021)

Article Agriculture, Multidisciplinary

Economics of open-air sun drying in the maize value chain of Kenya

Hugo De Groote et al.

Summary: The study found that profits from maize trading in Africa mainly come from spatial arbitrage rather than drying itself. The highest rate of return was for transporting maize from the drying place to the point of sale, at 24%, while the overall rate of return over the whole value chain was 26%. It is important to ensure that alternative drying technologies are more economical than open-air drying.

JOURNAL OF AGRICULTURE AND FOOD RESEARCH (2021)

Article Engineering, Chemical

On-farm heat pump-assisted fluidized bed dryer and its kinetics calculation

Stanislaw P. Rudobashta et al.

DRYING TECHNOLOGY (2020)

Article Engineering, Chemical

Nonlinear model of pneumatic conveying dryer for economic process control

Biplab Satpati et al.

DRYING TECHNOLOGY (2020)

Article Engineering, Chemical

Computer vision for real-time monitoring of shrinkage for peas dried in a fluidized bed dryer

Anthony Iheonye et al.

DRYING TECHNOLOGY (2020)

Article Engineering, Chemical

Optimization of the process of drying of corn seeds with the use of microwaves

Rute Quelvia de Faria et al.

DRYING TECHNOLOGY (2020)

Review Food Science & Technology

Starch-lipid and starch-lipid-protein complexes: A comprehensive review

Shujun Wang et al.

COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY (2020)

Article Engineering, Chemical

Impacts of hybrid (convective-infrared-rotary drum) drying on the quality attributes of green pea

Mohammad Kaveh et al.

JOURNAL OF FOOD PROCESS ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Experimental energy, exergy, economic and exergoeconomic analyses of batch-type solar-assisted heat pump dryer

Akhilesh Singh et al.

RENEWABLE ENERGY (2020)

Article Engineering, Chemical

Simulation of hot airinfrared-assistedgreen peas drying using finite element method

Dariush Zare et al.

JOURNAL OF FOOD PROCESS ENGINEERING (2020)

Article Food Science & Technology

Correlation using multivariate analysis and control of drying and storage conditions of sunflower grains on the quality of the extracted vegetable oil

Paulo Carteri Coradi et al.

JOURNAL OF FOOD PROCESSING AND PRESERVATION (2020)

Article Food Science & Technology

In vitro and in vivo digestibility of pea and chickpea powder prepared by cooking and drying treatment

Zhou Yu et al.

INTERNATIONAL JOURNAL OF FOOD PROPERTIES (2020)

Article Food Science & Technology

Moisture diffusion and shrinkage characteristics of broad bean during low-temperature vacuum drying

Jinshan Wang et al.

INTERNATIONAL JOURNAL OF FOOD PROPERTIES (2020)

Article Engineering, Chemical

Microwave drying process of corns based on double-porous model

Jie Zhou et al.

DRYING TECHNOLOGY (2019)

Article Engineering, Chemical

Evaluation of new parboiled rice process using humidified hot air fluidized bed drying

Theerasak Srimitrungroj et al.

DRYING TECHNOLOGY (2019)

Article Food Science & Technology

A 3-Dimensional Body Fitted Simulation of Heat and Mass Transfer in Rice Kernel during Hot Air Drying Process

Lijuan Zhao et al.

INTERNATIONAL JOURNAL OF FOOD ENGINEERING (2019)

Review Food Science & Technology

Emergent food proteins - Towards sustainability, health and innovation

L. H. Fasolin et al.

FOOD RESEARCH INTERNATIONAL (2019)

Article Engineering, Chemical

Performance evaluation of small scale energy efficient mixed flow dryer for drying of high moisture paddy

Md. Hasan Tarek Mondal et al.

DRYING TECHNOLOGY (2019)

Article Engineering, Chemical

Ultrasound-assisted heat pump drying of pea seed

Zhao Yang et al.

DRYING TECHNOLOGY (2018)

Article Engineering, Chemical

Intelligent control of a grain drying system using a GA-SVM-IMPC controller

Aini Dai et al.

DRYING TECHNOLOGY (2018)

Article Engineering, Chemical

Assessment of new in-bin drying and storage technology for soybean seed

G. G. Atungulu et al.

DRYING TECHNOLOGY (2018)

Article Engineering, Chemical

Energy and exergy efficiencies as design criteria for grain dryers

Rafael Pinheiro Amantea et al.

DRYING TECHNOLOGY (2018)

Article Engineering, Chemical

Optimization study of soybean intermittent drying in fixed-bed drying technology

Rafael Oliveira Defendi et al.

DRYING TECHNOLOGY (2017)

Article Engineering, Chemical

Drying kinetics and product quality of green soybean under different microwave drying methods

Xiaohuang Cao et al.

DRYING TECHNOLOGY (2017)

Article Engineering, Chemical

A study on drying models and internal stresses of the rice kernel during infrared drying

Jiazheng Wu et al.

DRYING TECHNOLOGY (2017)

Article Food Science & Technology

Investigating shrinkage and moisture diffusivity of melon seed in a microwave assisted thin layer fluidized bed dryer

Iman Golpour et al.

JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION (2017)

Article Food Science & Technology

Effect of mass on convective heat transfer coefficient during open sun drying of groundnut

Ravinder Kumar Sahdev et al.

JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2017)

Article Engineering, Mechanical

FORCED CONVECTION DRYING OF INDIAN GROUNDNUT: AN EXPERIMENTAL STUDY

Ravinder Kumar Sahdev et al.

FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING (2017)

Article Engineering, Chemical

Energy-exergy-ANN analyses of solar-assisted fluidized bed dryer

Alper Ergun et al.

DRYING TECHNOLOGY (2017)

Article Computer Science, Interdisciplinary Applications

Modelling and simulation of heat exchange and moisture content in a cereal storage silo

F. Hammami et al.

MATHEMATICAL AND COMPUTER MODELLING OF DYNAMICAL SYSTEMS (2016)