4.8 Review

Status and Prospects of MXene-Based Lithium-Oxygen Batteries: Theoretical Prediction and Experimental Modulation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

In situ decoration of CoP/Ti 3 C 2 T x composite as efficient electrocatalyst for Li-oxygen battery

Xingzi Zheng et al.

Summary: This paper introduces a novel Li-O2 battery electrocatalyst, a surface-functionalized CoP/Ti3C2Tx composite. The composite exhibits optimized electronic structure and active electrons, which enhance the efficiency of electrochemical reactions. The accordion shaped Ti3C2Tx with large specific surface area and excellent electronic conductivity enables sufficient exposure of active sites and Li2O2 deposition. Transition metal phosphides provide more active catalytic sites and exhibit good electrocatalytic performance. As an electrocatalyst in Li-O2 battery, the CoP/Ti3C2Tx composite achieves high specific discharge capacity and low overpotential, outperforming CoP and Ti3C2Tx individually. The application of transition metal phosphides and MXene in Li-O2 battery not only demonstrates higher cycling stability of the prepared composite, but also points out the direction for improving their electrochemical performance.

CHINESE CHEMICAL LETTERS (2023)

Article Materials Science, Multidisciplinary

Self-Catalyzed Rechargeable Lithium-Air Battery by in situ Metal Ion Doping of Discharge Products: A Combined Theoretical and Experimental Study

Mengwei Yuan et al.

Summary: The insulating nature of Li2O2 and the limited activity of solid-solid/-liquid interfaces hinder the performance of lithium-air battery, but in-situ doping of Li2O2 with select metal ions can greatly enhance the battery performance.

ENERGY & ENVIRONMENTAL MATERIALS (2023)

Article Chemistry, Multidisciplinary

New Conceptual Catalyst on Spatial High-Entropy Alloy Heterostructures for High-Performance Li-O2 Batteries

Peng Zhang et al.

Summary: The researchers successfully constructed a unique high-entropy alloy spatial heterostructure electrocatalyst that enhances the electrocatalytic activity of high-entropy alloy catalysts by manipulating electron distribution and the d-band center of interfacial metal atoms for oxygen reduction and evolution reactions in Li-O-2 batteries. The resulting electrocatalyst exhibited minimal polarization potential and long-term cyclability, surpassing most previously reported noble metal-based catalysts.
Review Chemistry, Physical

Air-Stable Protective Layers for Lithium Anode Achieving Safe Lithium Metal Batteries

Runjing Li et al.

Summary: This review discusses the application of lithium metal as a promising anode material in lithium metal batteries, as well as the corrosion and safety hazards of lithium metal in air. It proposes the solution of constructing stable air-stable protective layers and summarizes the current research progress and development prospects.

SMALL METHODS (2023)

Article Chemistry, Multidisciplinary

Bimetal Organic Framework-Ti3C2Tx MXene with Metalloporphyrin Electrocatalyst for Lithium-Oxygen Batteries

Sanghee Nam et al.

Summary: This study reports a new method of growing bimetallic cobalt-manganese organic framework on the MXene surface, which achieves high stability in open structured applications by enhancing oxidation resistance and electrocatalytic properties.

ADVANCED FUNCTIONAL MATERIALS (2023)

Article Chemistry, Multidisciplinary

Highly Stable Garnet Fe2Mo3O12 Cathode Boosts the Lithium-Air Battery Performance Featuring a Polyhedral Framework and Cationic Vacancy Concentrated Surface

Yang Qiu et al.

Summary: This article reports a highly active Fe2Mo3O12 (FeMoO) garnet cathode catalyst for lithium-air batteries (LABs) with high energy density. The experimental and theoretical analysis demonstrates that the catalyst has highly effective air catalytic activity and long-term stability while maintaining good structural stability. The catalyst delivers a cycle life of over 1800 h under a simple half-sealed condition in ambient air.

ADVANCED SCIENCE (2023)

Article Engineering, Environmental

Tailoring mixed geometrical configurations in amorphous catalysts to activate oxygen electrode reactions of lithium-oxygen batteries

Runjing Li et al.

Summary: Constructing well-designed catalysts by manipulating geometrical and electrical structures is an effective strategy for high-performance lithium-oxygen chemistry. However, achieving high activity and stability in catalysts simultaneously is challenging. In this study, researchers constructed an amorphous oxide/hydroxide with mixed geometrical configurations, which exhibited good catalytic activity and excellent stability. The catalyst's disordered structure provided numerous active sites and facilitated electron transport, resulting in enhanced oxygen evolution reaction and oxygen reduction reaction. The introduction of certain metal ions further improved the catalytic performance by reducing reaction paths and inducing strong electrostatic interactions. The catalyst demonstrated high specific discharge capacity and cycling stability in lithium-oxygen batteries.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Multidisciplinary

Theoretical Design and Structural Modulation of a Surface-Functionalized Ti3C2Tx MXene-Based Heterojunction Electrocatalyst for a Li-Oxygen Battery

Xingzi Zheng et al.

Summary: A surface-functionalized nitrogen-doped two-dimensional N-TiO2/Ti3C2Tx heterojunction with high conductivity and optimized electrocatalytic active sites was fabricated. It exhibited high specific capacity and superior cyclability in Li-oxygen batteries, along with reduced overpotential. Through experiments and tests, its high stability and reduced side reaction were verified.

ACS NANO (2022)

Article Engineering, Environmental

Uniformly distributed reaction by 3D host-lithium composite anode for high rate capability and reversibility of Li-O2 batteries

Min-Gi Jeong et al.

Summary: This study utilized a 3D porous Cu scaffold as a conductive host in Li-O-2 batteries to optimize the composite anode structure, and quantitatively investigated the influences of HLC on Li2O2 formation and decomposition, which provides a theoretical basis for improving the rate capability and reversibility of the batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

First-principle study on catalytic activity of functionalized Ti3C2 MXene as cathode catalyst for Li-O2 batteries

Yingying Yang et al.

Summary: In this study, the catalytic activity of Ti3C2 MXene in Li-O-2 batteries was investigated using theoretical calculations. It was found that Ti3C2 MXene with O-terminated groups showed better performance and potential in catalyzing ORR and OER. This research provides guidance for accelerating ORR and OER reactions in Li-O-2 batteries.

CURRENT APPLIED PHYSICS (2022)

Article Chemistry, Physical

Tuning the oxygen vacancy of mixed multiple oxidation states nanowires for improving Li-air battery performance

Mengwei Yuan et al.

Summary: By tuning the surface oxygen vacancies of CoMoO4 nanowires, highly efficient electrocatalysts were designed to improve the performance of Li-air batteries, enhancing oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Multidisciplinary

Nonvolatile and Nonflammable Sulfolane-Based Electrolyte Achieving Effective and Safe Operation of the Li-O2 Battery in Open O2 Environment

Zhengang Li et al.

Summary: This paper reports for the first time a highly electrochemical reversible Li-O-2 battery operated in an open O-2 environment. By using a nonvolatile and nonflammable solvent, the limitation of electrolyte for open O-2 environment is addressed. The stable solid electrolyte interface and reversible O-2 generation were achieved through the tuning of electrolyte composition.

NANO LETTERS (2022)

Article Chemistry, Applied

Long-cycling lithium-oxygen batteries enabled by tailoring Li nucleation and deposition via lithiophilic oxygen vacancy in Vo-TiO2/Ti3C2Tx composite anodes

Yu Yan et al.

Summary: The study presents a composite anode with oxygen vacancy-rich TiO2 nanoparticles uniformly dispersed on Ti3C2Tx, which effectively guides and modulates lithium growth behavior, leading to improved performance in lithium-oxygen batteries.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Energy & Fuels

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Laidong Zhou et al.

Summary: A series of new lithium mixed-metal chlorospinels are reported as solid electrolytes for all-solid-state lithium batteries, which exhibit high ionic conductivity and low electronic conductivity, showing potential for high-performance all-solid-state lithium batteries.

NATURE ENERGY (2022)

Review Electrochemistry

Recent Progress in MXene-Based Materials for Metal-Sulfur and Metal-Air Batteries: Potential High-Performance Electrodes

Anmin Liu et al.

Summary: MXenes, as an impressive family of two-dimensional transition metal carbides/carbonitrides, show great potential for energy storage due to their ideal specific surface area, excellent electrical conductivity, and superior chemical durability in batteries.

ELECTROCHEMICAL ENERGY REVIEWS (2022)

Article Engineering, Environmental

The controllable construction of nanochannel in two-dimensional lamellar film for efficient oxygen reduction reaction and lithium-oxygen batteries

Weixin Zhang et al.

Summary: In this study, a flexible Co-MOF/MXene hybrid film was prepared by inserting two-dimensional Co-MOF nanosheets for efficient Oxygen reduction reaction in Li-O2 batteries, showing high capacity, excellent cycle stability, and outstanding rate performance. Moreover, the capacity and cycle performance of Li-O2 batteries can be controlled by adjusting the loading of 2D Co-MOF and the thickness of Co-MOF/MXene hybrid film.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Inorganic & Nuclear

Ultrathin Two-Dimensional Bimetal-Organic FrameworkNanosheets as High-Performance Electrocatalysts for Benzyl Alcohol Oxidation

Yujing Song et al.

Summary: Ultrathin two-dimensional metal-organic frameworks (2DMOFs) synthesized through a moderate solvothermal method, with NiCo-61-MOF/NF as the main catalyst, achieved high-efficiency electrocatalysts for the oxidation of benzyl alcohol.

INORGANIC CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Crystal Phase Conversion on Cobalt Oxide: Stable Adsorption toward LiO2 for Film-Like Discharge Products Generation in Li-O2 Battery

Shuting Zhang et al.

Summary: By regulating the crystallization process of cobalt oxide, the reaction mechanism of Li-O-2 batteries can be controlled, leading to improved battery performance. This work provides an important method for tuning the intermediate and constructing high-performance battery systems.
Article Chemistry, Physical

2D SnSe Cathode Catalyst Featuring an Efficient Facet-Dependent Selective Li2O2 Growth/Decomposition for Li-Oxygen Batteries

Guoliang Zhang et al.

Summary: 2D materials with layered structure, unique electronic properties, and high stability have attracted much attention in the field of cathode catalysts for lithium-oxygen batteries (LOBs). In this study, tin selenide nanosheets with a black phosphorus-like 2D structure were synthesized and used as the cathode catalyst for LOBs. The exposed stack (200) facets and stack edge facets of SnSe nanosheets exhibited superior specific capacity and ultralong cycle stability in LOBs. Experimental and theoretical studies revealed that the 2D surface facets promoted the formation and stabilization of discharge products through the confined adsorption of Li2O2, leading to efficient formation/decomposition of discharge products.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Multidisciplinary

Composite NiCo2O4@CeO2 Microsphere as Cathode Catalyst for High-Performance Lithium-Oxygen Battery

Yuanhui Wu et al.

Summary: A composite microsphere material composed of NiCo2O4@CeO2 is synthesized and used as an electrocatalyst for lithium-oxygen batteries (LOBs) to address the challenges of high overpotential and poor cycle stability. The unique microstructured catalyst provides sufficient catalytic surface for barrier-free oxygen and lithium ion transport. The introduction of CeO2 increases oxygen vacancies and optimizes the electronic structure of NiCo2O4, thereby enhancing electron transport in the electrode. The catalytic cathode material reduces overpotential to 1.07 V and exhibits stable cycling performance.

ADVANCED SCIENCE (2022)

Article Materials Science, Multidisciplinary

Cationic vanadium vacancy-enriched V2-xO5 on V2C MXene as superior bifunctional electrocatalysts for Li-O2 batteries

Haoyang Xu et al.

Summary: This study investigates the bifunctional catalytic activity of V2-xO5@V2C MXene on the oxygen electrode reaction in Li-O-2 batteries. The results demonstrate excellent performance of the V2-xO5@V2C MXene-based Li-O-2 battery, with high energy efficiency and over 500 cycles of excellent cycling performance. Density functional theory calculations confirm that cationic vanadium vacancies can enhance the electrocatalytic activity of transition metal oxides by providing abundant active sites and optimizing reactant adsorption.

SCIENCE CHINA-MATERIALS (2022)

Article Materials Science, Multidisciplinary

V 2 C MXene enriched with -O termination as high-efficiency electrocatalyst for lithium-oxygen battery

Haoyang Xu et al.

Summary: This study finds that by regulating the surface functional groups of MXene, the electrocatalytic activity of MXene towards oxygen redox reactions in Li-O2 batteries can be enhanced, thereby improving the energy efficiency and stability of the batteries.

APPLIED MATERIALS TODAY (2022)

Article Chemistry, Physical

Electronic Bridge Construction via Ag Intercalation to Diminish Catalytic Anisotropy for 2D Tin Diselenide Cathode Catalyst in Lithium-Oxygen Batteries

Guoliang Zhang et al.

Summary: This study proposes an ion-intercalation strategy to diminish the catalytic anisotropy of 2D materials for better lithium-oxygen battery performance. The results demonstrate that intercalated Ag ions can regulate the electronic states between stack edge planes, significantly enhancing the catalytic capability of 2D materials. It can efficiently accelerate charge transfer and suppress passivation during the oxygen reduction/evolution reaction process.

ADVANCED ENERGY MATERIALS (2022)

Article Nanoscience & Nanotechnology

Nb2CTx MXene Cathode for High-Capacity Rechargeable Aluminum Batteries with Prolonged Cycle Lifetime

Xingjun Liu et al.

Summary: This study demonstrates that rechargeable aluminum batteries with 2D Nb2CTx MXene as a cathode material exhibit excellent capacity and long cyclic performance. After proper treatment, aluminum batteries embedded with calcined Nb2CTx MXene cathodes retain high capacity and significantly extended cyclic lifetime. The controllable d-spacing of Nb2CTx nanosheets promotes ion migration, leading to enhanced charge storage. The formation of niobium oxides and amorphous carbon after calcination benefits the electrochemical performance of Nb2CTx MXene electrode in aluminum batteries.

ACS APPLIED MATERIALS & INTERFACES (2022)

Review Chemistry, Physical

Ion Transport Kinetics in Low-Temperature Lithium Metal Batteries

Anjun Hu et al.

Summary: This review systematically reviews and discusses the critical limiting factors and challenges for low-temperature ion transport behaviors, and comprehensively summarizes the strategies to enhance Li+ transport kinetics. Finally, perspectives on future research directions of low-temperature LMBs towards practical applications are proposed.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Highly efficient two-dimensional Ag2Te cathode catalyst featuring a layer structure derived catalytic anisotropy in lithium-oxygen batteries

Liang Guo et al.

Summary: In this study, chemically bonded silver telluride nanowires were used as a highly efficient catalyst for lithium-oxygen batteries (LOBs), exhibiting outstanding performance and stability. Experimental and computational results revealed the superior catalytic activity and weak structure-derived catalytic anisotropy of the two-dimensional layer structure of silver telluride in LOBs.

ENERGY STORAGE MATERIALS (2022)

Review Chemistry, Physical

Recent Advances in Titanium Carbide MXene (Ti3C2TX) Cathode Material for Lithium-Air Battery

Samra Asad et al.

Summary: As fossil fuels are becoming depleted, the world is shifting towards renewable energy sources and energy storage technologies. Metal-air batteries, specifically lithium-air batteries, are gaining attention due to their high energy density. MXenes, with their high electrical conductivity and catalytic activity, have emerged as promising materials for energy storage applications.

ACS APPLIED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Stacking surface derived catalytic capability and by-product prevention for high efficient two dimensional Bi2Te3 cathode catalyst in Li-oxygen batteries

Juanjuan Feng et al.

Summary: In this study, the catalytic performance of 2D structured Bi2Te3 in Li-oxygen batteries was investigated. The stack surface (001) plane of Bi2Te3 was found to provide outstanding catalytic capability and high conductivity, leading to high specific capacity and cycling stability.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Review Chemistry, Multidisciplinary

Evolving aprotic Li-air batteries

Zhenzhen Wu et al.

Summary: Lithium-air batteries have attracted significant attention due to their high energy density and renewable features. However, the lack of critical electrode materials and a thorough understanding of the chemistry has hindered their development. Recent research has focused on systematic electrode design, fabrication, and modification, as well as comprehensive electrolyte selection. Future development requires further exploration and optimization.

CHEMICAL SOCIETY REVIEWS (2022)

Article Chemistry, Physical

Accelerating the reaction kinetics of lithium-oxygen chemistry by modulating electron acceptance-donation interaction in electrocatalysts

Chuan Zhao et al.

Summary: This study demonstrates the improved performance of lithium-oxygen batteries by using Co-doped Zn-based zeolite imidazole framework nanosheets as catalysts. The incorporation of Co allows for the regulation of electronic structure and the formation of unique product morphology, resulting in efficient mass and charge transfer.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Multidisciplinary

Mildly Oxidized MXene (Ti3C2, Nb2C, and V2C) Electrocatalyst via a Generic Strategy Enables Longevous Li-O2 Battery under a High Rate

Yongxiang Jiang et al.

Summary: This study presents a universal synthesis approach to fabricate mildly oxidized MXenes as cathode catalysts for Lithium-oxygen batteries (LOBs), achieving high specific capacity and long lifespan. The mo-V2CTx shows excellent electrocatalytic performance and stability, operating continuously for 90 cycles under a high current density.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Halogenated Ti3C2 MXenes with Electrochemically Active Terminals for High-Performance Zinc Ion Batteries

Mian Li et al.

Summary: Experimental exploration of various halogen terminals on the surface of Ti3C2 MXenes showed that the presence of Br and I elements resulted in improved electrochemical performance for aqueous zinc ion batteries. The Lewis-acidic-melt etching route proved to be effective in tuning the surface chemistry of MXenes for expanding their potential applications.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Ambient-Stable Two-Dimensional Titanium Carbide (MXene) Enabled by Iodine Etching

Huanhuan Shi et al.

Summary: The study demonstrated a fluoride-free, iodine-assisted etching route for preparing oxygen-rich two-dimensional MXene with intact lattice structure. These MXene sheets exhibit excellent thin-film conductivity and great ambient stability in water, showing promise for practical applications.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Halogen Etch of Ti3AlC2 MAX Phase for MXene Fabrication

Ali Jawaid et al.

Summary: A new room-temperature etching method using halogens in anhydrous media can synthesize MXenes from Ti3AlC2, providing opportunities for controlled surface chemistries to modulate MXene properties. The radical-mediated process strongly depends on various factors, such as the molar ratio of halogen to MAX phase, concentration of halogen, solvent, and temperature.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Ultrafast, One-Step, Salt-Solution-Based Acoustic Synthesis of Ti3C2 MXene

Ahmed El Ghazaly et al.

Summary: This study presents a one-step synthesis method for the conversion from Ti3AlC2 MAX to Ti3C2Tz MXene on the order of milliseconds, facilitated by the combination of protons and fluorine ions to selectively etch the MAX phase. The results demonstrate that flexible electrodes fabricated using this method exhibit comparable electrochemical performance to previously reported ones.

ACS NANO (2021)

Article Chemistry, Physical

Surface defect engineering of metal oxides photocatalyst for energy application and water treatment

Pankaj Raizada et al.

Summary: Despite the excellent characteristics of metal oxides in photocatalysis, they often suffer from charge carrier recombination and limited visible response, leading to reduced photocatalytic output. This study provides a comprehensive overview of recent developments in classifying metal oxide defects based on host crystal lattice dimensions, focusing on surface modifications through various types of defects and their impacts on photocatalytic performance. By modifying the morphology and electronic structure of metal oxide photocatalysts through defect engineering, their activity can be significantly improved for applications such as H-2 evolution, CO2 reduction, pollutant degradation, and bacterial disinfection.

JOURNAL OF MATERIOMICS (2021)

Article Chemistry, Multidisciplinary

Carbon-Reinforced Nb2CTx MXene/MoS2 Nanosheets as a Superior Rate and High-Capacity Anode for Sodium-Ion Batteries

Zeyu Yuan et al.

Summary: The development of sodium-ion battery anode materials with excellent performance has improved cycling stability and rate capabilities, potentially expanding the practical applications of sodium-ion batteries.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Single Semi-Metallic Selenium Atoms on Ti3C2 MXene Nanosheets as Excellent Cathode for Lithium-Oxygen Batteries

Danyang Zhao et al.

Summary: A CO2-assisted thermal-reaction strategy was developed to fabricate isolated semi-metallic selenium single-atom-doped Ti3C2 MXene catalysts for high-performance Li-O-2 batteries, significantly enhancing the oxygen reduction kinetics, improving overpotentials, and promoting the absorption ability of lithium peroxide, leading to improved redox kinetics and reduced overpotentials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Reversed Charge Transfer and Enhanced Hydrogen Spillover in Platinum Nanoclusters Anchored on Titanium Oxide with Rich Oxygen Vacancies Boost Hydrogen Evolution Reaction

Zhen-Wei Wei et al.

Summary: The study demonstrates that Pt nanoclusters supported on porous TiO2 nanosheets with rich oxygen vacancies exhibit significantly higher catalytic activity for the HER compared to those supported on TiO2 with deficient oxygen vacancies. This is attributed to the ability of the TiO2 support with rich oxygen vacancies to facilitate reversed charge transfer and enhanced hydrogen spillover, promoting proton reduction and hydrogen desorption at Pt catalytic sites. This work provides a new strategy for the rational design of highly efficient HER catalysts.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

MnCo2S4-CoS1.097 Heterostructure Nanotubes as High Efficiency Cathode Catalysts for Stable and Long-Life Lithium-Oxygen Batteries Under High Current Conditions

Qing Xia et al.

Summary: Constructing heterostructures is an effective method to improve the electrical conductivity and electrocatalytic properties of metal sulfide catalysts. In this study, MnCo2S4-CoS1.097 nanotubes were successfully prepared and demonstrated high specific capacities and good cycling stability under high current conditions. The superior electrochemical performance is attributed to fast ion and electron transmission, multiple active sites, and the nanotube architecture with large specific surface area.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Research progress of MXene-based catalysts for electrochemical water-splitting and metal-air batteries

Jingyuan Qiao et al.

Summary: MXenes, a rising family of 2D materials, show great potential in electrocatalysis due to their unique combination of properties such as high electrical conductivities and adjustable surface properties. This review summarizes the preparation methods, properties, and applications of MXenes in important reactions like HER, OER, and ORR. Strategies for improving their performance and discussing the challenges and prospects in the field are also highlighted.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

A-site cationic defects induced electronic structure regulation of LaMnO3 perovskite boosts oxygen electrode reactions in aprotic lithium-oxygen batteries

Dayue Du et al.

Summary: This study presents a facile strategy to fabricate LaMnO3-δ perovskite with abundant defects, which exhibits superior electrocatalytic performance in Li-O-2 batteries by modulating the local coordination state of active Mn atoms and optimizing the electronic structure. The abundant crystal defects not only enhance the covalency of Mn-O bonds but also promote lattice oxygen participated redox reaction, accelerating electron transport and regulating Li2O2 formation and decomposition mechanism.

ENERGY STORAGE MATERIALS (2021)

Article Multidisciplinary Sciences

A highly stable and flexible zeolite electrolyte solid-state Li-air battery

Xiwen Chi et al.

Summary: Solid-state lithium-air batteries with integrated ultrathin, high-ion-conductive zeolite X membrane as the sole solid electrolyte exhibit excellent electrochemical performance, flexibility, and stability. These batteries have a high capacity and cycle life, outperforming batteries based on other materials under the same conditions, and show potential for practical applicability in various energy-storage systems.

NATURE (2021)

Article Chemistry, Physical

MoSe2@CNT Core-Shell Nanostructures as Grain Promoters Featuring a Direct Li2O2 Formation/Decomposition Catalytic Capability in Lithium-Oxygen Batteries

Biao He et al.

Summary: This study investigates the use of MoSe2@CNT to improve the performance of lithium-oxygen batteries, with the MoSe2 layers acting as grain promoters and preventing the formation of byproducts. The cathode demonstrated superior specific capacity, excellent rate capabilities, and long cycle life.

ADVANCED ENERGY MATERIALS (2021)

Article Nanoscience & Nanotechnology

Suppressing Redox Shuttle with MXene-Modified Separators for Li-O2 Batteries

Lei Shi et al.

Summary: A chemical binding strategy based on a MXene-modified separator with a 3D porous hierarchical structure has been developed to suppress the I-3(-) shuttling in LiI-involved Li-O-2 battery. The abundant -OH terminal groups on the MXene surface act as effective binding sites for suppressing the migration of I-3(-), while the 3D porous structure ensures fast transfer of lithium ions, resulting in improved battery performance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Rational Design of Highly Stable and Active MXene-Based Bifunctional ORR/OER Double-Atom Catalysts

Bo Wei et al.

Summary: Designing highly active and bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts with non-noble metals such as Fe/Co/Ni on MXene surfaces has shown superior performance compared to traditional unifunctional catalysts, providing a novel pathway for tunable catalytic behavior in MXenes. The electronic structure analyses revealed that the excellent catalytic activities in MXene-based DACs are attributed to the electron-capturing capability and synergistic interactions between Fe/Co/Ni adsorbents and MXene substrate. These findings not only suggest promising candidates for MXene-based bifunctional ORR/OER catalysts but also offer new theoretical insights into rationally designing noble-metal-free bifunctional DACs.

ADVANCED MATERIALS (2021)

Review Chemistry, Multidisciplinary

Advances in the Synthesis of 2D MXenes

Yi Wei et al.

Summary: MXenes, versatile materials with adjustable structures and rich surface chemistry, have been recognized as potential 2D materials for various applications. Recent research has focused on synthetic routes, etching methods, and delamination strategies for large-scale preparation and stable storage. Antioxidation strategies for MXenes have also been summarized for future developments and practical applications.

ADVANCED MATERIALS (2021)

Editorial Material Materials Science, Ceramics

A decade of discovery: A review of MXenes, the family of 2D transition metal carbides and nitrides

Yury Gogotsi

AMERICAN CERAMIC SOCIETY BULLETIN (2021)

Article Chemistry, Physical

Bifunctional Catalytic Activity Guided by Rich Crystal Defects in Ti3C2 MXene Quantum Dot Clusters for Li-O2 Batteries

Peng Wang et al.

Summary: The study demonstrates that the Ti3C2 QDC/N-C material, with abundant crystal defects and well-defined grain boundaries and edge defects, enhances catalytic activity and cycling stability for lithium-oxygen batteries. Furthermore, density functional theory calculations reveal the significant role of crystal defects in catalytic centers.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Unique intermediate adsorption enabled by anion vacancies in metal sulfide embedded MXene nanosheets overcoming kinetic barriers of oxygen electrode reactions in lithium-oxygen batteries

Ruixin Zheng et al.

Summary: Designing electrode materials with sulfur vacancy-rich Ni3S2 on two-dimensional MXene as a bifunctional catalyst for lithium-oxygen batteries (LOBs) significantly reduces overpotentials, improves long-term cyclic stability, and modifies the deposition mechanism of Li2O2 by exposing coordination unsaturated sites on the surface.

ENERGY STORAGE MATERIALS (2021)

Review Chemistry, Physical

Defective Structures in Metal Compounds for Energy-Related Electrocatalysis

Xuecheng Yan et al.

Summary: This article focuses on the manipulation of electronic structures and surface properties of electrocatalysts, as well as the introduction of defects to enhance their activity. It summarizes the commonly used methods for creating anion and cation vacancies, and emphasizes the control of defect density and filling heteroatoms to improve catalytic performance.

SMALL STRUCTURES (2021)

Review Multidisciplinary Sciences

The world of two-dimensional carbides and nitrides (MXenes)

Armin Vahid Mohammadi et al.

Summary: MXenes, a family of two-dimensional materials, have diverse properties and wide-ranging applications in areas such as optics, catalysis, sensing, and medicine. Future research directions will focus on deepening the fundamental understanding of MXenes properties and exploring their potential for hybridization with other 2D materials.

SCIENCE (2021)

Article Chemistry, Multidisciplinary

An artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode

Anjun Hu et al.

Summary: An artificial hybrid SEI layer composed of lithium-antimony alloy and lithium fluoride was constructed to reduce electron tunneling between the Li anode and SEI, resulting in uniform Li deposition and stable Li plating/stripping behaviors at an ultrahigh rate. This work uncovers the internal mechanism of Li+ transport within the SEI component, providing a pathway to stabilize the Li anode under practical high-rate conditions.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

Highly Efficient Nb2C MXene Cathode Catalyst with Uniform O-Terminated Surface for Lithium-Oxygen Batteries

Gaoyang Li et al.

Summary: The study demonstrates the catalytic capability of Nb2C MXene as a cathode material for LOBs, highlighting its superior electrocatalytic performance and high-rate cycle stability.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Multidisciplinary

Electrolytes for Rechargeable Lithium-Air Batteries

Jingning Lai et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

Nanostructured Ni/Ti3C2Tx MXene hybrid as cathode for lithium-oxygen battery

Caiying Wen et al.

CHINESE CHEMICAL LETTERS (2020)

Article Chemistry, Physical

Iron doped CoP nanowires on carbon cloth: An efficient and stable electrocatalyst for Li-O2 battery

Peng Hei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Multidisciplinary

Scalable Synthesis of Ti3C2Tx MXene

Christopher E. Shuck et al.

ADVANCED ENGINEERING MATERIALS (2020)

Review Engineering, Environmental

Recent advances in 2D MXenes for enhanced cation intercalation in energy harvesting Applications: A review

N. R. Hemanth et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Chemistry, Multidisciplinary

Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects

Ersha Fan et al.

CHEMICAL REVIEWS (2020)

Review Chemistry, Multidisciplinary

Lithium-Oxygen Batteries and Related Systems: Potential, Status, and Future

Won-Jin Kwak et al.

CHEMICAL REVIEWS (2020)

Review Chemistry, Multidisciplinary

A Critical Review on Functionalization of Air-Cathodes for Nonaqueous Li-O2 Batteries

Moran Balaish et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Recent Advances and Promise of MXene-Based Nanostructures for High-Performance Metal Ion Batteries

Yanfeng Dong et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Multidisciplinary Sciences

Approaching the activity limit of CoSe2 for oxygen evolution via Fe doping and Co vacancy

Yuhai Dou et al.

NATURE COMMUNICATIONS (2020)

Review Chemistry, Multidisciplinary

3D MXene Architectures for Efficient Energy Storage and Conversion

Ke Li et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Coupled Vacancy Pairs in Ni-Doped CoSe for Improved Electrocatalytic Hydrogen Production Through Topochemical Deintercalation

Wenwu Zhong et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Engineering, Environmental

Realizing the growth of nano-network Li2O2 film on defect-rich holey Co9S8 nanosheets for Li-O2 battery

Gan Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Multidisciplinary Sciences

Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes

Vladislav Kamysbayev et al.

SCIENCE (2020)

Article Green & Sustainable Science & Technology

Two-dimensional fluorine-free mesoporous Mo2C MXene via UV-induced selective etching of Mo2Ga2C for energy storage

Jun Mei et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2020)

Article Chemistry, Multidisciplinary

Atomically dispersed metal sites anchored in N-doped carbon nanosheets with enhanced Li storage performance

Mengwei Yuan et al.

MATERIALS CHEMISTRY FRONTIERS (2020)

Review Chemistry, Physical

The importance of anode protection towards lithium oxygen batteries

Xuanxuan Bi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Engineering, Environmental

2D MXenes: Electromagnetic property for microwave absorption and electromagnetic interference shielding

Mao-Sheng Cao et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Materials Science, Multidisciplinary

Overview of the synthesis of MXenes and other ultrathin 2D transition metal carbides and nitrides

Louisiane Verger et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2019)

Article Chemistry, Multidisciplinary

MXene (Ti3C2) Vacancy-Confined Single-Atom Catalyst for Efficient Functionalization of CO2

Di Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Chemistry, Multidisciplinary

Element Replacement Approach by Reaction with Lewis Acidic Molten Salts to Synthesize Nanolaminated MAX Phases and MXenes

Mian Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Review Chemistry, Multidisciplinary

MXene-Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors

Jian Yang et al.

ADVANCED MATERIALS INTERFACES (2019)

Article Chemistry, Physical

Theoretical Prediction of Catalytic Activity of Ti2C MXene as Cathode for Li-O2 Batteries

Yingying Yang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Chemistry, Multidisciplinary

MXene-Bonded Flexible Hard Carbon Film as Anode for Stable Na/K-Ion Storage

Ning Sun et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Flexible 3D Porous MXene Foam for High-Performance Lithium-Ion Batteries

Qian Zhao et al.

Article Chemistry, Multidisciplinary

Manganese Carbodiimide Nanoparticles Modified with N-Doping Carbon: A Bifunctional Cathode Electrocatalyst for Aprotic Li-O2 Battery

Mengwei Yuan et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Review Chemistry, Multidisciplinary

Promoting Li-O2 Batteries With Redox Mediators

Xiaoxiao Shen et al.

CHEMSUSCHEM (2019)

Review Chemistry, Physical

Metal-organic frameworks and their derivatives for metal-air batteries

Bingjun Zhu et al.

ENERGY STORAGE MATERIALS (2019)

Review Chemistry, Physical

Atomic (single, double, and triple atoms) catalysis: frontiers, opportunities, and challenges

Z. W. Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

Solid-state electrolyte considerations for electric vehicle batteries

Hao Shen et al.

SUSTAINABLE ENERGY & FUELS (2019)

Review Chemistry, Physical

Design strategies toward catalytic materials and cathode structures for emerging Li-CO2 batteries

Anjun Hu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Multidisciplinary

Applications of 2D MXenes in energy conversion and storage systems

Jinbo Pang et al.

CHEMICAL SOCIETY REVIEWS (2019)

Review Materials Science, Multidisciplinary

Advances in the development of power supplies for the Internet of Everything

Xiayue Fan et al.

INFOMAT (2019)

Article Chemistry, Multidisciplinary

Atomic Cobalt Covalently Engineered Interlayers for Superior Lithium-Ion Storage

Changda Wang et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

W-Based Atomic Laminates and Their 2D Derivative W1.33C MXene with Vacancy Ordering

Rahele Meshkian et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Preferential Cation Vacancies in Perovskite Hydroxide for the Oxygen Evolution Reaction

Dawei Chen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Review Green & Sustainable Science & Technology

The lithium-ion battery: State of the art and future perspectives

Ghassan Zubi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Materials Science, Multidisciplinary

Enhanced Terahertz Shielding of MXenes with Nano-Metamaterials

Geunchang Choi et al.

ADVANCED OPTICAL MATERIALS (2018)

Article Chemistry, Inorganic & Nuclear

Formation of multi-shelled nickel-based sulfide hollow spheres for rechargeable alkaline batteries

Dongwei Li et al.

INORGANIC CHEMISTRY FRONTIERS (2018)

Review Materials Science, Multidisciplinary

Advanced Lithium-Ion Batteries for Practical Applications: Technology, Development, and Future Perspectives

Sinho Choi et al.

ADVANCED MATERIALS TECHNOLOGIES (2018)

Article Chemistry, Multidisciplinary

Necklace-like Multishelled Hollow Spinel Oxides with Oxygen Vacancies for Efficient Water Electrolysis

Shengjie Peng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Fluoride-Free Synthesis of Two-Dimensional Titanium Carbide (MXene) Using A Binary Aqueous System

Sheng Yang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Pharmacology & Pharmacy

Tuning the Intrinsic Nanotoxicity in Advanced Therapeutics

Shuying Wang et al.

ADVANCED THERAPEUTICS (2018)

Article Chemistry, Multidisciplinary

Synthesis and Properties of a Photopatternable Lithium-Ion Conducting Solid Electrolyte

Christopher S. Choi et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Atomic Vacancies Control of Pd-Based Catalysts for Enhanced Electrochemical Performance

Yunpeng Zuo et al.

ADVANCED MATERIALS (2018)

Review Chemistry, Multidisciplinary

Redox Mediators for Li-O2 Batteries: Status and Perspectives

Jin-Bum Park et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Physical

2D MXenes: A New Family of Promising Catalysts for the Hydrogen Evolution Reaction

Guoping Gao et al.

ACS CATALYSIS (2017)

Article Chemistry, Multidisciplinary

Highly Efficiently Delaminated Single-Layered MXene Nanosheets with Large Lateral Size

Gengnan Li et al.

LANGMUIR (2017)

Article Chemistry, Physical

Optoelectronic and spectroscopic characterization of vapour-transport grown Cu2ZnSnS4 single crystals

Tat Ming Ng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Review Nanoscience & Nanotechnology

2D metal carbides and nitrides (MXenes) for energy storage

Babak Anasori et al.

NATURE REVIEWS MATERIALS (2017)

Review Chemistry, Multidisciplinary

Nanostructured Metal Oxides and Sulfides for Lithium-Sulfur Batteries

Xue Liu et al.

ADVANCED MATERIALS (2017)

Review Chemistry, Physical

High performance lithium metal anode: Progress and prospects

Jialiang Lang et al.

ENERGY STORAGE MATERIALS (2017)

Article Chemistry, Multidisciplinary

Carbon-Incorporated Nickel-Cobalt Mixed Metal Phosphide Nanoboxes with Enhanced Electrocatalytic Activity for Oxygen Evolution

Peilei He et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Multidisciplinary

Interacting Carbon Nitride and Titanium Carbide Nanosheets for High-Performance Oxygen Evolution

Tian Yi Ma et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Multidisciplinary

Atomic Defects in Monolayer Titanium Carbide (Ti3C2Tx) MXene

Xiahan Sang et al.

ACS NANO (2016)

Article Chemistry, Multidisciplinary

Boosted Charge Transfer in SnS/SnO2 Heterostructures: Toward High Rate Capability for Sodium-Ion Batteries

Yang Zheng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Review Chemistry, Multidisciplinary

Why Do Lithium-Oxygen Batteries Fail: Parasitic Chemical Reactions and Their Synergistic Effect

Xiahui Yao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Multidisciplinary

A self-defense redox mediator for efficient lithium-O-2 batteries

Tao Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Synthesis of two-dimensional titanium nitride Ti4N3 (MXene)

Patrick Urbankowski et al.

NANOSCALE (2016)

Review Chemistry, Physical

Transition metal carbide-based materials: synthesis and applications in electrochemical energy storage

Ying Xiao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Review Chemistry, Physical

Rechargeable lithium-air batteries: a perspective on the development of oxygen electrodes

Kyu-Nam Jung et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Nanoscience & Nanotechnology

Effect of Synthesis on Quality, Electronic Properties and Environmental Stability of Individual Monolayer Ti3C2 MXene Flakes

Alexey Lipatov et al.

ADVANCED ELECTRONIC MATERIALS (2016)

Review Multidisciplinary Sciences

Research progresses of cathodic hydrogen evolution in advanced lead-acid batteries

Feng Wang et al.

SCIENCE BULLETIN (2016)

Article Chemistry, Multidisciplinary

Synthesis and X-ray Characterization of Cobalt Phosphide (Co2P) Nanorods for the Oxygen Reduction Reaction

Vicky V. T. Doan-Nguyen et al.

ACS NANO (2015)

Article Chemistry, Multidisciplinary

Controlled Anisotropic Growth of Co-Fe-P from Co-Fe-O Nanoparticles

Adriana Mendoza-Garcia et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Article Chemistry, Inorganic & Nuclear

Large-scale delamination of multi-layers transition metal carbides and carbonitrides MXenes

Michael Naguib et al.

DALTON TRANSACTIONS (2015)

Review Chemistry, Multidisciplinary

A review of cathode materials and structures for rechargeable lithium-air batteries

Zhong Ma et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Review Chemistry, Physical

Review on Li-Sulfur Battery Systems: an Integral Perspective

Ariel Rosenman et al.

ADVANCED ENERGY MATERIALS (2015)

Review Chemistry, Multidisciplinary

Towards greener and more sustainable batteries for electrical energy storage

D. Larcher et al.

NATURE CHEMISTRY (2015)

Article Chemistry, Multidisciplinary

Optimizing Main Materials for a Lithium- Air Battery of High Cycle Life

Zhong-Kuan Luo et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Multidisciplinary Sciences

Conductive two-dimensional titanium carbide 'clay' with high volumetric capacitance

Michael Ghidiu et al.

NATURE (2014)

Review Chemistry, Multidisciplinary

Making Li-Air Batteries Rechargeable: Material Challenges

Yuyan Shao et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Review Chemistry, Multidisciplinary

Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries

M. V. Reddy et al.

CHEMICAL REVIEWS (2013)

Article Electrochemistry

Degradation and revival of Li-O2 battery cathode

Jiang-Lan Shui et al.

ELECTROCHEMISTRY COMMUNICATIONS (2013)

Article Multidisciplinary Sciences

Intercalation and delamination of layered carbides and carbonitrides

Olha Mashtalir et al.

NATURE COMMUNICATIONS (2013)

Article Chemistry, Multidisciplinary

An improved high-performance lithium-air battery

Hun-Gi Jung et al.

NATURE CHEMISTRY (2012)

Review Chemistry, Physical

Li-O2 and Li-S batteries with high energy storage

Peter G. Bruce et al.

NATURE MATERIALS (2012)

Article Multidisciplinary Sciences

A Reversible and Higher-Rate Li-O2 Battery

Zhangquan Peng et al.

SCIENCE (2012)

Review Chemistry, Multidisciplinary

Functional Materials for Rechargeable Batteries

Fangyi Cheng et al.

ADVANCED MATERIALS (2011)

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

Article Chemistry, Physical

Advanced hydrogen storage alloys for Ni/MH rechargeable batteries

Yongfeng Liu et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Review Chemistry, Physical

Review on Li-air batteries-Opportunities, limitations and perspective

Alexander Kraytsberg et al.

JOURNAL OF POWER SOURCES (2011)

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)