4.8 Article

Wearable perovskite solar cells by aligned liquid crystal elastomers

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Molecularly Tailored SnO2/Perovskite Interface Enabling Efficient and Stable FAPbI3 Solar Cells

Yang Zhang et al.

Summary: This study demonstrates a strategy of molecularly tailoring the FAPbI(3)/SnO2 interface to enhance the stability of perovskite solar cells. By optimizing the configuration of C-O and C=O groups, the device achieved a champion power conversion efficiency of 23.5% and maintained good stability under continuous light illumination.

ACS ENERGY LETTERS (2022)

Article Chemistry, Multidisciplinary

Co-assembled Monolayers as Hole-Selective Contact for High-Performance Inverted Perovskite Solar Cells with Optimized Recombination Loss and Long-Term Stability

Xiang Deng et al.

Summary: This paper introduces a new method of using co-assembled monolayer (co-SAM) to achieve efficient hole selection and suppressed recombination in inverted perovskite solar cells (PSCs) by adjusting the position of substituents in the compound. By utilizing co-SAM, excellent performance and stability of the solar cells are achieved.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Letter Chemistry, Physical

Broadband and pixelated camouflage in inflating chiral nematic liquid crystalline elastomers

Se-Um Kim et al.

Summary: This research introduces a method using pneumatically inflating thin membranes of main-chain chiral nematic liquid crystalline elastomers to achieve pixelated structural coloration with broadband spectral shifts in a compact space. The materials can be geometrically programmed to control the size and layout of air channels for color shifting from near-infrared to ultraviolet wavelengths. Each channel can be individually controlled as a color 'pixel' for various applications such as cryptography, adaptive optics, and soft robotics.

NATURE MATERIALS (2022)

Review Physics, Applied

Multi-functional liquid crystal elastomer composites

Yuchen Wang et al.

Summary: Liquid crystal elastomers (LCEs) are widely used due to their programmable morphologies under heat. Design and fabrication of LCE composites offer enhanced physical properties and additional stimuli responses. This review focuses on recent advances in LCE composites and concludes with challenges and future research opportunities.

APPLIED PHYSICS REVIEWS (2022)

Review Nanoscience & Nanotechnology

Synthesis and alignment of liquid crystalline elastomers

Katie M. Herbert et al.

Summary: Liquid crystalline elastomers (LCEs) combine the elastic properties of rubber with the anisotropic properties of liquid crystals, allowing for multifunctionality and responsivity through local orientation patterning. Advances in materials chemistry and processing have paved the way for the functional integration of LCEs in various fields.

NATURE REVIEWS MATERIALS (2022)

Article Engineering, Biomedical

An integrated wearable microneedle array for the continuous monitoring of multiple biomarkers in interstitial fluid

Farshad Tehrani et al.

Summary: The study presents a fully integrated wearable array of microneedles for wireless and continuous real-time sensing of metabolites in interstitial fluid. The device shows robust analytical performance and good correlation with gold-standard measurements.

NATURE BIOMEDICAL ENGINEERING (2022)

Article Chemistry, Multidisciplinary

Low-Bandgap Organic Bulk-Heterojunction Enabled Efficient and Flexible Perovskite Solar Cells

Shengfan Wu et al.

Summary: Lead halide perovskite and organic solar cells are seen as promising candidates for clean energy applications, but improvements are needed in the near-infrared photon loss and photovoltage deficit. By integrating low-bandgap organic bulk-heterojunction layers into inverted PSCs, high-performance hybrid solar cells can be constructed. These hybrid solar cells demonstrate excellent power conversion efficiency, extended photoresponse, and superior long-term stability compared to single-component PSCs and OSCs. With the highest efficiency reported for flexible solar cells to date, flexible HSCs can be integrated as a power source for wearable sensors, demonstrating real-time temperature monitoring capabilities.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Multidisciplinary Sciences

Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness

Qingshun Dong et al.

Summary: This study introduces a new approach by incorporating an interpenetrating structure at the electron-transporting-layer interface in perovskite solar cells, enhancing their operational stability and mechanical robustness.

NATURE COMMUNICATIONS (2021)

Article Energy & Fuels

Degradation mechanisms of perovskite solar cells under vacuum and one atmosphere of nitrogen

Renjun Guo et al.

Summary: Research shows that perovskite solar cells operated under vacuum exhibit light-induced phase segregation, lattice shrinkage, and morphology deformation, while those operated under nitrogen only show lattice shrinkage, resulting in better device stability.

NATURE ENERGY (2021)

Article Multidisciplinary Sciences

Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability

Zhenghong Dai et al.

Summary: The use of iodine-terminated self-assembled monolayer (I-SAM) in perovskite solar cells (PSCs) leads to increased adhesion toughness at the interface, improved power conversion efficiency, reduced hysteresis, and enhanced operational stability. This is attributed to a decrease in hydroxyl groups at the interface and higher interfacial toughness achieved with I-SAM treatment.

SCIENCE (2021)

Article Chemistry, Physical

Flexible perovskite solar cells with simultaneously improved efficiency, operational stability, and mechanical reliability

Qingshun Dong et al.

Summary: The growth of a low-dimensional metal-halide perovskite capping layer on flexible perovskite solar cells simultaneously improves power conversion efficiency, operational stability, and bending durability, attributing to enhanced photocarriers extraction, environmental protection, and surface flaw sealing.
Review Chemistry, Multidisciplinary

Reducing Detrimental Defects for High-Performance Metal Halide Perovskite Solar Cells

Luis K. Ono et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Multidisciplinary Sciences

Fatigue-resistant adhesion of hydrogels

Ji Liu et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

Repeatable and Reprogrammable Shape Morphing from Photoresponsive Gold Nanorod/Liquid Crystal Elastomers

Yuchen Wang et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

Bio-inspired vertebral design for scalable and flexible perovskite solar cells

Xiangchuan Meng et al.

NATURE COMMUNICATIONS (2020)

Review Chemistry, Physical

Self-Assembled Monolayers as Interface Engineering Nanomaterials in Perovskite Solar Cells

Seo Yeon Kim et al.

ADVANCED ENERGY MATERIALS (2020)

Review Chemistry, Multidisciplinary

Towards commercialization: the operational stability of perovskite solar cells

Nengxu Li et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Chemistry, Multidisciplinary

Halide Perovskites: Is It All about the Interfaces?

Philip Schulz et al.

CHEMICAL REVIEWS (2019)

Review Chemistry, Multidisciplinary

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena et al.

CHEMICAL REVIEWS (2019)

Article Multidisciplinary Sciences

Strain engineering in perovskite solar cells and its impacts on carrier dynamics

Cheng Zhu et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Self-Powered Sensors Enabled by Wide-Bandgap Perovskite Indoor Photovoltaic Cells

Ian Mathews et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Intelligently Actuating Liquid Crystal Elastomer-Carbon Nanotube Composites

Hyun Kim et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Physical

Flexible Perovskite Solar Cells

Hyun Suk Jung et al.

Article Chemistry, Multidisciplinary

Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy

Jiangshan Feng et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering.

Dae-Yong Son et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Editorial Material Chemistry, Physical

Present status and future prospects of perovskite photovoltaics

Henry J. Snaith

NATURE MATERIALS (2018)

Article Multidisciplinary Sciences

Molecular-channel driven actuator with considerations for multiple configurations and color switching

Jiuke Mu et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Fullerene derivative anchored SnO2 for high-performance perovskite solar cells

Kuan Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

Article Chemistry, Multidisciplinary

Wearable Large-Scale Perovskite Solar-Power Source via Nanocellular Scaffold

Xiaotian Hu et al.

ADVANCED MATERIALS (2017)

Article Multidisciplinary Sciences

A polymer scaffold for self-healing perovskite solar cells

Yicheng Zhao et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Physical

Microstructures of Organometal Trihalide Perovskites for Solar Cells: Their Evolution from Solutions and Characterization

Yuanyuan Zhou et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Multidisciplinary

Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer

Linfeng Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)