☆ 4.7 Article

3D bioprinting of tyramine modified hydrogels under visible light for osteochondral interface

BIOFABRICATION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Biomedical

Swelling-Dependent Shape-Based Transformation of a Human Mesenchymal Stromal Cells-Laden 4D Bioprinted Construct for Cartilage Tissue Engineering

Pedro J. Diaz-Payno et al.

Summary: A 4D biofabrication method for cartilage engineering is reported, which uses a smart multi-material system to create shape-changing constructs. By printing two different ink formulations with differential swelling, the scaffold self-bends to achieve the desired shape. High cell viability is demonstrated in a bioprinted formulation with human bone marrow cells.

ADVANCED HEALTHCARE MATERIALS (2023)

添加到收藏夹

Article Biochemistry & Molecular Biology

Tricomposite gelatin-carboxymethylcellulose-alginate bioink for direct and indirect 3D printing of human knee meniscal scaffold

P. B. Sathish et al.

Summary: The study reports the development of customizable scaffolds for cartilage tissue engineering applications using optimized composite hydrogel bioink, suitable for both direct and indirect printing. The bioink, consisting of gelatin, carboxymethyl cellulose (CMC) and alginate, was optimized and characterized for its printability, structural, bio-mechanical and bio-functional properties. The 3D scaffolds with MG63-osteosarcoma cells showed increased collagen secretion, cellular proliferation and changes in biomechanical properties, indicating suitability for cartilage tissue engineering.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

添加到收藏夹

Article Engineering, Biomedical

Bisulfite-initiated crosslinking of gelatin methacryloyl hydrogels for embedded 3D bioprinting

Cigdem Bilici et al.

Summary: Recent studies have shown promising outcomes in 3D bioprinting of GelMA hydrogels with cell-laden structures for tissue engineering applications. However, the reliance on photo-induced gelation processes and the lack of alternative crosslinking methods have posed challenges. This study presents a novel approach using embedded bioprinting and bisulfite-initiated radical polymerization to form cell-laden GelMA hydrogel constructs, resulting in printed structures with high cell viability.

BIOFABRICATION (2022)

添加到收藏夹

Article Engineering, Biomedical

Fabrication of MSC-laden composites of hyaluronic acid hydrogels reinforced with MEW scaffolds for cartilage repair

Jonathan H. Galarraga et al.

Summary: This study demonstrates the advantages of loosely crosslinked NorHA hydrogels in cartilage formation and maturation, and improves their mechanical properties by reinforcing them with PCL microfibers. The designed cell-laden implants hold potential for cartilage repair.

BIOFABRICATION (2022)

添加到收藏夹

Article Engineering, Biomedical

3D Fiber Reinforced Hydrogel Scaffolds by Melt Electrowriting and Gel Casting as a Hybrid Design for Wound Healing

Ferdows Afghah et al.

Summary: Emerging biomanufacturing technologies have revolutionized tissue engineering by developing hybrid designs for skin tissue engineering, which combine traditional wound dressing principles with advanced biofabrication methods. In this study, a hybrid design of fiber-reinforced scaffolds combined with gel casting is developed and shown to significantly enhance wound healing through the inclusion of growth factors and bioactive glass.

ADVANCED HEALTHCARE MATERIALS (2022)

添加到收藏夹

Article Engineering, Biomedical

Potential of laponite incorporated oxidized alginate-gelatin (ADA-GEL) composite hydrogels for extrusion-based 3D printing

Fei-Fan Cai et al.

Summary: A new composite hydrogel combining oxidized alginate-gelatin (ADA-GEL) hydrogel and laponite nanoclay was successfully developed and characterized in this study. The addition of 0.5% laponite nanoplatelets improved the printability of ADA-GEL hydrogels. Different needle types (cylindrical and conical) were compared in filament fusion test, showing enhanced printing accuracy with a cylindrical tip. A glass flip test determined a processing window of 1-2 hours after composite ink preparation, confirming laponite/ADA-GEL hydrogel composites as promising inks for 3D bioprinting.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2021)

添加到收藏夹

Article Polymer Science

Formulation and Characterization of Alginate-Based Membranes for the Potential Transdermal Delivery of Methotrexate

Dorothea Bajas et al.

Summary: The study aims to assess and select the most suitable alginate-based membrane for controlled release of methotrexate, through various analyses and experiments. Results indicate that membranes made from alginate/alginate and polyvinylpyrrolidone are suitable for drug release, while the alginate and carbopol membrane is not homogeneous and thus not appropriate for the task. Interactions between the AGP-MTX membrane and the active substance were observed, indicating potential issues with carboxylate group interactions and interactions in aqueous medium.

POLYMERS (2021)

添加到收藏夹

Review Engineering, Biomedical

Articular cartilage and osteochondral tissue engineering techniques: Recent advances and challenges

Wenying Wei et al.

Summary: Osteochondral defect regeneration remains a challenging issue in the musculoskeletal system, with traditional clinical treatments showing limited efficacy. However, the development of tissue engineering has provided more promising results in regenerating damaged osteochondral tissues.

BIOACTIVE MATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Spatial micro-variation of 3D hydrogel stiffness regulates the biomechanical properties of hMSCs

Zheng Wang et al.

Summary: This study introduces a scheme using maleimide-dextran hydrogel to modify the biomechanical properties of hMSCs. The experiment demonstrates that the hydrogel triggers the formation of multicellular spheroids and can soften hMSCs by adjusting the degree of stiffness variation, allowing them to pass through micro-channels more easily.

BIOFABRICATION (2021)

添加到收藏夹

Review Cell & Tissue Engineering

Tissue Engineering Strategies to Increase Osteochondral Regeneration of Stem Cells; a Close Look at Different Modalities

Sepideh Saghati et al.

Summary: The homeostasis of osteochondral tissue is tightly controlled by chondrocytes and osteoblasts, with stem cells seen as a potential alternative cell source for treating osteochondral diseases. Biomechanical forces, electrical fields, and biochemical/physical properties of the extracellular matrix play a major role in determining stem cell differentiation capacity. Additional mechanisms related to signal-transduction pathways may also mediate the chondro-osteogenic differentiation of stem cells.

STEM CELL REVIEWS AND REPORTS (2021)

添加到收藏夹

Article Engineering, Biomedical

One-Step Photoactivation of a Dual-Functionalized Bioink as Cell Carrier and Cartilage-Binding Glue for Chondral Regeneration

Khoon S. Lim et al.

ADVANCED HEALTHCARE MATERIALS (2020)

添加到收藏夹

Editorial Material Genetics & Heredity

Osteocalcin promotes bone mineralization but is not a hormone

Stavros C. Manolagas

PLOS GENETICS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Alteration of Young's modulus in mesenchymal stromal cells during osteogenesis measured by atomic force microscopy

Meng-Hua Yen et al.

BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS (2020)

添加到收藏夹

Article Engineering, Biomedical

3D printing of fibre-reinforced cartilaginous templates for the regeneration of osteochondral defects

Susan Critchley et al.

ACTA BIOMATERIALIA (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Printability and Shape Fidelity of Bioinks in 3D Bioprinting

Andrea Schwab et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels

Amin GhavamiNejad et al.

SMALL (2020)

添加到收藏夹

Review Cell Biology

Molecular Signaling Interactions and Transport at the Osteochondral Interface: A Review

Mateus Oliveira Silva et al.

FRONTIERS IN CELL AND DEVELOPMENTAL BIOLOGY (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Proliferation and Osteogenic Differentiation of hMSCs on Biomineralized Collagen

Daniel de Melo Pereira et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

添加到收藏夹

Review Materials Science, Biomaterials

Gradient scaffolds for osteochondral tissue engineering and regeneration

Bin Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY B (2020)

添加到收藏夹

Article Engineering, Biomedical

Reinforcing interpenetrating network hydrogels with 3D printed polymer networks to engineer cartilage mimetic composites

Rossana Schipani et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Emergency Medicine

Stiffness-mediated mesenchymal stem cell fate decision in 3D-bioprinted hydrogels

Yufan Liu et al.

BURNS & TRAUMA (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Visible Light Cross-Linking of Gelatin Hydrogels Offers an Enhanced Cell Microenvironment with Improved Light Penetration Depth

Khoon S. Lim et al.

MACROMOLECULAR BIOSCIENCE (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Osteochondral Tissue Regeneration Using a Tyramine-Modified Bilayered PLGA Scaffold Combined with Articular Chondrocytes in a Porcine Model

Tzu-Hsiang Lin et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)

添加到收藏夹

Review Biochemistry & Molecular Biology

Bioprinting and its applications in tissue engineering and regenerative medicine

Waeljumah Aljohani et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

添加到收藏夹

Review Biochemistry & Molecular Biology

Chemical crosslinking of biopolymeric scaffolds: Current knowledge and future directions of crosslinked engineered bone scaffolds

Ahmad Oryan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

添加到收藏夹

Article Cell & Tissue Engineering

PROGENITOR CELLS IN AURICULAR CARTILAGE DEMONSTRATE CARTILAGE-FORMING CAPACITY IN 3D HYDROGEL CULTURE

I. A. Otto et al.

EUROPEAN CELLS & MATERIALS (2018)

添加到收藏夹

Article Engineering, Biomedical

3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking

D. Petta et al.

BIOFABRICATION (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-crosslinkable Inks

Liliang Ouyang et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Cell & Tissue Engineering

Three-Dimensional Printing Articular Cartilage: Recapitulating the Complexity of Native Tissue

Ting Guo et al.

TISSUE ENGINEERING PART B-REVIEWS (2017)

添加到收藏夹

Review Engineering, Biomedical

3D Bioprinting for Cartilage and Osteochondral Tissue Engineering

Andrew C. Daly et al.

ADVANCED HEALTHCARE MATERIALS (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Next generation tissue engineering of orthopedic soft tissue-to-bone interfaces

Alexander J. Boys et al.

MRS COMMUNICATIONS (2017)

添加到收藏夹

Review Biochemical Research Methods

3D bioprinting and the current applications in tissue engineering

Ying Huang et al.

BIOTECHNOLOGY JOURNAL (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mimicking Hierarchical Complexity of the Osteochondral Interface Using Electrospun Silk Bioactive Glass Composites

Joseph M. Christakiran et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Biochemistry & Molecular Biology

A Periosteum-Inspired 3D Hydrogel-Bioceramic Composite for Enhanced Bone Regeneration

Yong Yao Chun et al.

MACROMOLECULAR BIOSCIENCE (2016)

添加到收藏夹

Review Rheumatology

Changes in the osteochondral unit during osteoarthritis: structure, function and cartilage-bone crosstalk

Steven R. Goldring et al.

NATURE REVIEWS RHEUMATOLOGY (2016)

添加到收藏夹

Article Materials Science, Biomaterials

New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks

Khoon S. Lim et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Biomaterials

New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks

Khoon S. Lim et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Multifunctional 3D printing of heterogeneous hydrogel structures

Ali Nadernezhad et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Engineering, Biomedical

Three-dimensional bioprinting of multilayered constructs containing human mesenchymal stromal cells for osteochondral tissue regeneration in the rabbit knee joint

Jin-Hyung Shim et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Engineering, Biomedical

Engineering cartilage or endochondral bone: A comparison of different naturally derived hydrogels

Eamon J. Sheehy et al.

ACTA BIOMATERIALIA (2015)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Challenges in engineering osteochondral tissue grafts with hierarchical structures

Ivana Gadjanski et al.

EXPERT OPINION ON BIOLOGICAL THERAPY (2015)

添加到收藏夹

Article Biochemistry & Molecular Biology

Promoting Cell Survival and Proliferation in Degradable Poly(vinyl alcohol)-Tyramine Hydrogels

Khoon S. Lim et al.

MACROMOLECULAR BIOSCIENCE (2015)

添加到收藏夹

Article Polymer Science

Enzymatically crosslinked alginate hydrogels with improved adhesion properties

Junxia Hou et al.

POLYMER CHEMISTRY (2015)

添加到收藏夹

Article Chemistry, Applied

Tyramine modified alginates via periodate oxidation for peroxidase induced hydrogel formation and immobilization

Olivera Prodanovic et al.

REACTIVE & FUNCTIONAL POLYMERS (2015)

添加到收藏夹

Article Cell & Tissue Engineering

FACT VERSUS ARTIFACT: AVOIDING ERRONEOUS ESTIMATES OF SULFATED GLYCOSAMINOGLYCAN CONTENT USING THE DIMETHYLMETHYLENE BLUE COLORIMETRIC ASSAY FOR TISSUE-ENGINEERED CONSTRUCTS

C. H. Zheng et al.

EUROPEAN CELLS & MATERIALS (2015)

添加到收藏夹

Article Engineering, Biomedical

Pore size effect of collagen scaffolds on cartilage regeneration

Qin Zhang et al.

ACTA BIOMATERIALIA (2014)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Engineering Articular Cartilage-Like Grafts by Self-Assembly of Infrapatellar Fat Pad-Derived Stem Cells

Tariq Mesallati et al.

BIOTECHNOLOGY AND BIOENGINEERING (2014)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Nanoscale Adhesion Forces between Enamel Pellicle Proteins and Hydroxyapatite

D. Vukosavljevic et al.

JOURNAL OF DENTAL RESEARCH (2014)

添加到收藏夹

Article Engineering, Biomedical

Impact of the composition of alginate and gelatin derivatives in bioconjugated hydrogels on the fabrication of cell sheets and spherical tissues with living cell sheaths

Yang Liu et al.

ACTA BIOMATERIALIA (2013)

添加到收藏夹

Review Engineering, Biomedical

Self-Organization and the Self-Assembling Process in Tissue Engineering

Kyriacos A. Athanasiou et al.

ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 15 (2013)

添加到收藏夹

Article Engineering, Biomedical

Gelatin embedding for the preparation of thermoreversible or delicate scaffolds for histological analysis

Veronika Hruschka et al.

BIOMEDICAL MATERIALS (2013)

添加到收藏夹

Article Engineering, Biomedical

Enzymatically cross-linked gelatin-phenol hydrogels with a broader stiffness range for osteogenic differentiation of human mesenchymal stem cells

Li-Shan Wang et al.

ACTA BIOMATERIALIA (2012)

添加到收藏夹

Article Engineering, Biomedical

A functional agarose-hydroxyapatite scaffold for osteochondral interface regeneration

Nora T. Khanarian et al.

BIOMATERIALS (2012)

添加到收藏夹

Article Engineering, Biomedical

Simultaneous regeneration of articular cartilage and subchondral bone in vivo using MSCs induced by a spatially controlled gene delivery system in bilayered integrated scaffolds

Jiangning Chen et al.

BIOMATERIALS (2011)

添加到收藏夹

Article Polymer Science

Pluronics as crosslinking agents for collagen: novel amphiphilic hydrogels

Christa M. Homenick et al.

POLYMER INTERNATIONAL (2011)

添加到收藏夹

Article Engineering, Biomedical

Control of cellular adhesiveness in an alginate-based hydrogel by varying peroxidase and H2O2 concentrations during gelation

S. Sakai et al.

ACTA BIOMATERIALIA (2010)

添加到收藏夹

Article Engineering, Biomedical

Bioactive Stratified Polymer Ceramic-Hydrogel Scaffold for Integrative Osteochondral Repair

Jie Jiang et al.

ANNALS OF BIOMEDICAL ENGINEERING (2010)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Hepatocytes exhibit constant metabolic activity on carboxymethylcellulose-based hydrogel with high phenolic hydroxy group content

Yuko Ogushi et al.

BIOCHEMICAL ENGINEERING JOURNAL (2010)

添加到收藏夹

Article Engineering, Biomedical

A highly elastic tissue sealant based on photopolymerised gelatin

Christopher M. Elvin et al.

BIOMATERIALS (2010)

添加到收藏夹

Article Cell Biology

Understanding the effect of mean pore size on cell activity in collagen-glycosaminoglycan scaffolds

Ciara M. Murphy et al.

CELL ADHESION & MIGRATION (2010)

添加到收藏夹

Article Engineering, Biomedical

Enzymatically crosslinked carboxymethylcellulose-tyramine conjugate hydrogel: Cellular adhesiveness and feasibility for cell sheet technology

Shinji Sakai et al.

ACTA BIOMATERIALIA (2009)

添加到收藏夹

Article Chemistry, Physical

Effect of Cross-Linking on the Diffusion of Water, Ions, and Small Molecules in Hydrogels

Yanbin Wu et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2009)

添加到收藏夹

Article Biochemistry & Molecular Biology

Phenolic Hydroxy Groups Incorporated for the Peroxidase-Catalyzed Gelation of a Carboxymethylcellulose Support: Cellular Adhesion and Proliferation

Yuko Ogushi et al.

MACROMOLECULAR BIOSCIENCE (2009)

添加到收藏夹

Review Medicine, Research & Experimental

Regulation of chondrogenesis and chondrocyte differentiation by stress

Michael J. Zuscik et al.

JOURNAL OF CLINICAL INVESTIGATION (2008)

添加到收藏夹

Review Chemistry, Physical

Nanomechanics of polymer gels and biological tissues: A critical review of analytical approaches in the Hertzian regime and beyond

David C. Lin et al.

SOFT MATTER (2008)

添加到收藏夹

Review Cell Biology

Osteoarthritis

Mary B. Goldring et al.

JOURNAL OF CELLULAR PHYSIOLOGY (2007)

添加到收藏夹

Article Engineering, Biomedical

A biodegradable fibrin scaffold for mesenchymal stem cell transplantation

W Bensaïd et al.

BIOMATERIALS (2003)

添加到收藏夹

Article Engineering, Biomedical

The effects of cross-linking of collagen-glycosaminoglycan scaffolds on compressive stiffness, chondrocyte-mediated contraction, proliferation and biosynthesis

CR Lee et al.

BIOMATERIALS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.