☆ 4.7 Article

Corrosion behavior and mechanical properties of extruded low-alloyed Mg-0.5Bi-0.5Y-0.2Zn alloy

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Tensile Properties and Corrosion Behavior of a Dilute Mg-0.5Sn-0.7Al-0.8Zn Alloy Applied for Biomaterials

Weili Cheng et al.

Summary: The novel dilute Mg-0.5Sn-0.7Al-0.8Zn alloy, directly extruded after casting, exhibited a fine bimodal grained microstructure, local nano-precipitates micro-region, and typical extrusion direction (ED)-tilted texture. It achieved a great balance between tensile properties and corrosion resistance, suggesting its potential for development as a biomaterial.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of lithium content on the mechanical and corrosion behaviors of HCP binary Mg-Li alloys

Chuanqiang Li et al.

Summary: In this study, the microstructure, crystallographic texture, mechanical properties, and corrosion resistance of as-extruded HCP Mg-xLi (x = 1, 3, 5; in wt%) alloys were investigated. The results showed that the Mg-5Li alloy with high lithium content exhibited a low degree of dynamic recrystallization and strong prismatic texture, leading to higher mechanical strength along the extrusion direction. Additionally, the high lithium content improved the corrosion resistance of the alloy and mitigated groove-like corrosion.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and mechanical and corrosion properties of hot-extruded Mg-Zn-Ca-(Mn) biodegradable alloys

V. E. Bazhenov et al.

Summary: Biodegradable Mg-Zn-Ca-(Mn) alloys undergo grain refinement, increased strength, and decreased elongation during hot extrusion, with the addition of Mn significantly reducing the corrosion rate of the alloys, making them suitable for orthopedic implants.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Micro-galvanic corrosion behavior and mechanical properties of extruded Mg-2Y-1Zn-0.4Zr-0.3Sr alloys with different extrusion temperament immersed in simulated body fluids

Xin Cao et al.

Summary: The Mg-2Y-1Zn-0.4Zr-0.3Sr alloy, a new degradable material for biomedical applications, underwent plastic extrusion deformation to improve corrosion resistance and mechanical properties. The alloy's grains were refined significantly, W-phase particles were distributed more evenly, and corrosion resistance and mechanical properties were enhanced.

MATERIALS CHEMISTRY AND PHYSICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effects of Na2HPO4 on corrosion behaviour of Mg-5%Zn and Mg-7%Zn alloys in ovalbumin

Yudi Nugraha Thaha et al.

Summary: The corrosion behavior of Mg5Zn and Mg7Zn alloys in ovalbumin solution is accelerated by the addition of Na2HPO4, leading to a more severe corrosion attack. The presence of Na2HPO4 decreases the charge transfer resistance and film resistance on the alloy surface, promoting passivation and increasing corrosion rate.

MATERIALS CHEMISTRY AND PHYSICS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of microstructural characteristics on corrosion behavior of Mg-5Sn-3In alloy in Hank's solution

Xue-jian Wang et al.

Summary: The study investigated the influence of microstructural characteristics on the corrosion behavior of Mg-5Sn-3In alloys in Hank's solution after extrusion, showing that the extruded alloy exhibited a more uniform corrosion morphology and reduced local corrosion susceptibility. Cytotoxicity tests indicated a low cytotoxicity level for the alloy in vitro assays.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Cu addition on the microstructure, mechanical properties and degradation rate of Mg-2Gd alloy

Shiyu Zhong et al.

Summary: By adding copper (Cu) to Mg-2Gd alloy, more Mg2Cu second phases were precipitated, resulting in refined grain size and changing texture. This led to enhanced hardness, tensile strength, compressive strength, and degradation rate, while reducing strain hardening rate and elongation. However, the elongation still remained at least 20%. Overall, the comprehensive mechanical properties and degradation rate of Mg-2Gd alloy were effectively coordinated by Cu addition.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Chemistry, Physical

The role of Ga in the microstructure, corrosion behavior and mechanical properties of as-extruded Mg-5Sn-xGa alloys

Xuejian Wang et al.

Summary: The addition of Ga element was found to enhance the corrosion resistance and tensile strength of Mg-5Sn alloy, with the maximum elongation to fracture achieved in Mg-5Sn-1Ga alloy. The precipitation of Mg5Ga2 particles and the formation of more stable corrosion products were observed with increasing Ga content in the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation on the corrosion resistance of the Mg-10Al-xMn alloys based on thermodynamic calculations

Xiaojing Li et al.

Summary: The corrosion resistance of alloys is influenced by both the Gibbs energies and the content of second phases, with a lower Mn content corresponding to a more positive Gibbs energy and better corrosion resistance. Alloy 2# exhibited the best corrosion resistance among the five alloys studied.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Ag on cathodic activation and corrosion behaviour of Mg-Mn-Ag alloys

Lei Yang et al.

Summary: The study found that Ag significantly influences the corrosion behavior of Mg-Mn-Ag alloys, enhances cathodic activation, and results in a significant increase in the corrosion rate of the alloy with immersion time.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Correlations among stress corrosion cracking, grain-boundary microchemistry, and Zn content in high Zn-containing Al-Zn-Mg-Cu alloys

Ding-ling Yuan et al.

Summary: The study found that the tensile strength enhancement of high Zn-containing Al-Zn-Mg-Cu alloys was mainly due to the high density nano-scale matrix precipitates. The SCC plateau velocity was significantly higher in the alloy with 11.0 wt.% Zn compared to the alloy with 7.9 wt.% Zn, which was attributed to Zn enrichment in grain boundary precipitates and wide precipitates-free zones.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Tailoring the microstructural characteristic and improving the corrosion resistance of extruded dilute Mg-0.5Bi-0.5Sn alloy by microalloying with Mn

Yang Liu et al.

Summary: The addition of 0.5 wt% Mn microalloy significantly enhances the corrosion resistance of Mg-0.5Bi-0.5Sn alloy, reducing grain size and dislocation density, while also observing new second phase and grain boundary segregation in certain micro-regions.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure, mechanical properties and corrosion behavior of quaternary Mg-1Zn-0.2Ca-xAg alloy wires applied as degradable anastomotic nails

Ying-zhong Ma et al.

Summary: The quaternary degradable Mg-1Zn-0.2Ca-xAg (x=1, 2, 4 wt.%) alloy wires investigated for use as anastomotic nails exhibit excellent mechanical properties, with Mg-1Zn-0.2Ca-4Ag alloy showing the highest tensile strength and elongation. However, the corrosion rates of these alloy wires increase significantly with higher Ag content.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and corrosion behavior of as-extruded Mg-xLi-3Al-2Zn-0.2Zr alloys (x=5, 8, 11 wt.%)

Yuehua Sun et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Microstructure, tensile properties, and corrosion resistance of extruded Mg-1Bi-1Zn alloy: The influence of minor Ca addition

Yan-hui Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A high-ductility extruded Mg-Bi-Ca alloy

S. J. Meng et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of alloyed Ca on the microstructure and corrosion behavior of extruded Mg-Bi-Al-based alloys

Yang Liu et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties, degradation behaviors and biocompatibility of micro-alloyed Mg-Sr-RE alloys for stent applications

Hongyan Tang et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behavior characterization of as extruded Mg-8Li-3Al alloy with minor alloying elements (Gd, Sn and Cu) by scanning Kelvin probe force microscopy

Zhi Hu et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure characterization and corrosion behavior of Mg-Y-Zn alloys with different long period stacking ordered structures

Lisha Wang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and corrosion behavior of Mg-Sc binary alloys in 3.5 wt.% NaCl solution

Cheng Zhang et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Novel Mg-Bi-Al alloy with extraordinary extrudability and high strength

Jongbin Go et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Corrosion behavior of Mg-3Gd-1Zn-0.4Zr alloy with and without stacking faults

Xiaobo Zhang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of alloyed Sr on the microstructure and corrosion behavior of biodegradable Mg-Zn-Mn alloy in Hanks' solution

Hui Pan et al.

CORROSION SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of twins on the corrosion behavior of Mg-5Y-7Gd-1Nd-0.5Zr Mg alloy

Jinhui Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Corrosion behavior of Mg-6Bi-2Sn alloy in the simulated body fluid solution: The influence of microstructural characteristics

Wei-li Cheng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Sn content on strain hardening behavior of as-extruded Mg-Sn alloys

Chaoyue Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Chemistry, Physical

Corrosion behavior and mechanism of Mg-Y-Zn-Zr alloys with various Y/Zn mole ratios

Lei Bao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Engineering, Biomedical

Microstructures, mechanical properties and corrosion resistances of extruded Mg-Zn-Ca-xCe/La alloys

L. B. Tong et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

In vitro corrosion of as-extruded Mg-Ca alloys-The influence of Ca concentration

Rong-Chang Zeng et al.

CORROSION SCIENCE (2015)

添加到收藏夹

Article Chemistry, Physical

The role of bismuth on the microstructure and corrosion behavior of ternary Mg-1.2Ca-xBi alloys for biomedical applications

H. Y. Tok et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Strengthening mechanisms of indirect-extruded Mg-Sn based alloys at room temperature

Wei Li Cheng et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior

Tao Zhang et al.

CORROSION SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion properties and corrosion evolution of as-cast AZ91 alloy with rare earth yttrium

T. J. Luo et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of yttrium (Y) on the corrosion of Mg-Y binary alloys

Ming Liu et al.

CORROSION SCIENCE (2010)

添加到收藏夹

Article Materials Science, Biomaterials

Effect of Y on the bio-corrosion behavior of extruded Mg-Zn-Mn alloy in Hank's solution

Weiwei He et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.