4.7 Article

Cyclic compressive behavior and load-strain model of FRP-concrete double tube composite columns

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Mechanics

Experimental investigation on axial compressive behavior of novel FRP-ECC-HSC composite short column

Shuai Li et al.

Summary: A novel composite column structure, consisting of an outer fiber reinforced polymer (FRP) tube, an engineered cementitious composite (ECC) ring and an inner high strength concrete (HSC) core, is proposed and experimentally investigated in this study. The ECC ring is used to redistribute the hoop stress and strain from the HSC core to the FRP tube, improving the performance of FRP-confined HSC columns. Through testing 12 stub columns with different HSC core strengths and ECC ring thicknesses, it is found that the FRP-ECC-HSC composite columns exhibit larger FRP confining efficiency and more uniform hoop strain distribution compared to normal FRP-confined HSC columns. The ultimate axial strain is also significantly enhanced, leading to improved ductile compressive behavior.

COMPOSITE STRUCTURES (2023)

Article Construction & Building Technology

Design-oriented stress-strain model for FRP-confined ultra-high performance concrete (UHPC)

JinJing Liao et al.

Summary: This study developed a new design-oriented stress-strain model to predict the stress-strain relationship of FRP-confined UHPC cylinders under axial compression. The model accurately estimated characteristic stresses and strains and showed good agreement with most of the test results, filling the research gap in this area.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Engineering, Civil

A novel seawater and sea sand concrete-filled FRP-carbon steel composite tube column: Cyclic axial compression behaviour and modelling

Yirui Zhang et al.

Summary: This paper presents an experimental investigation of a novel seawater and sea sand concrete-filled fibre-reinforced polymer-carbon steel composite tube column subjected to cyclic axial compression loadings. The proposed structure is covered with fibre-reinforced polymer on both the inner and outer walls of a traditional carbon steel tube to solve the corrosion problem of seawater and sea sand concrete and to improve considerably the mechanical properties of the structure at the same time. The results show that fibre-reinforced polymer can effectively confine the lateral expansion of concrete and a more reasonable cyclic stress-strain model was proposed based on the different confinement mechanisms of the internal and external layers of fibre-reinforced polymer on concrete.

ENGINEERING STRUCTURES (2022)

Article Engineering, Civil

Axial compression behaviours of seawater and sea sand concrete-filled GFRP stub tubes at arctic low temperatures

Jian Xie et al.

Summary: This study conducted a series of low-temperature tests on the axial compression behaviors of thirty stub columns, including different types of components and parameters. The results indicated an improvement in the axial compression behaviors of CFFTs at low temperatures, and proposed prediction formulas for reasonably predicting their ultimate compression resistance and ultimate axial strain.

THIN-WALLED STRUCTURES (2022)

Article Engineering, Civil

Axial compressive behavior and modeling of fiber-reinforced polymer-concrete-steel double-skin tubular stub columns with a rectangular outer tube and an elliptical inner tube

Yanlei Wang et al.

Summary: This paper presents the experimental results of axial compression tests on glass fiber-reinforced polymer (FRP)-concrete-steel double-skin tubular stub columns (DSTCs) and glass FRP-confined hollow stub columns (FCHCs). The results show that rectangular DSTCs have excellent bearing capacity and ductility, with a noticeable post-peak softening phenomenon due to inadequate confinement. Furthermore, the aspect ratio, FRP thickness, void area ratio, and elliptical inner steel tube have a positive effect on the axial compressive behavior of confined concrete core in rectangular DSTCs.

ENGINEERING STRUCTURES (2022)

Article Mechanics

Stress-strain behavior and design-oriented model for FRP spiral strip-confined concrete

JinJing Liao et al.

Summary: Partial fiber-reinforced polymer (FRP) wrapping is an effective technique for strengthening reinforced concrete (RC) columns. In this study, the confinement mechanism of FRP spiral strip-wrapped concrete columns is investigated through axial compression tests. The results show that the proposed confinement effectiveness factor significantly affects the ultimate axial stress and the slope of the axial stress-strain curve. A new design-oriented stress-strain model is proposed based on the test data, which demonstrates good accuracy and robustness.

COMPOSITE STRUCTURES (2022)

Article Mechanics

Performance and modeling of FRP-steel dually confined reinforced concrete under cyclic axial loading

Guipeng Chen et al.

Summary: Fiber-reinforced polymer (FRP)-steel tubed reinforced concrete (FSTRC) columns show promising engineering applications. This paper investigates the behavior of circular FSTRC stub columns under monotonic and cyclic axial loading. A confinement model is developed for accurately estimating the full-range behavior of the FRP-steel dually confined reinforced concrete under cyclic axial loading.

COMPOSITE STRUCTURES (2022)

Review Construction & Building Technology

Recent developments in Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) with high and ultra-high strength

Ji-Xiang Zhu et al.

Summary: This study reviews the recent developments in high/ultra-high-strength engineered cementitious composites (ECC) from material design to structural application. The use of high-performance synthetic fibers and dense cementitious matrices has been shown to enhance the mechanical properties and sustainability of ECC. The potential structural applications and challenges of ECC are also discussed.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Engineering, Civil

Compressive behavior and analysis-oriented model of FRP-confined engineered cementitious composite columns

Shuai Li et al.

Summary: This study experimentally investigated the mechanical behavior of FRP-confined ECC under axial compression. The effects of different FRP materials and thicknesses on the material performance were analyzed. The failure modes, stress-strain behavior, and dilation behavior were presented and discussed. Design equations were developed to predict the ultimate compressive strength and strain. Based on the test results and literature data, an analysis-oriented model was proposed to predict the overall compressive stress-strain behavior of FRP-confined ECC columns.

ENGINEERING STRUCTURES (2022)

Article Engineering, Civil

Development and behavior of novel FRP-UHPC tubular members

Jun-Jie Zeng et al.

Summary: This short communication introduces a series of novel tubular members made of fiber-reinforced polymer (FRP) grid reinforced ultra-high-performance concrete (UHPC), which exhibit excellent mechanical properties and have been demonstrated to perform well in various preliminary studies.

ENGINEERING STRUCTURES (2022)

Article Engineering, Civil

Behavior of GFRP-concrete double tube composite columns

Shuai Li et al.

Summary: A novel glass fiber-reinforced polymer (GFRP) - concrete double tube composite column is proposed in this study. Through testing 20 specimens, it is found that the performance of the composite column is significantly enhanced in terms of deformability compared to traditional GFRP-confined concrete columns. Equations are developed to predict the ultimate load carrying capacity and ultimate axial strain for the proposed composite column.

THIN-WALLED STRUCTURES (2022)

Article Engineering, Civil

Development and behavior of novel FRP-UHPC tubular members

Jun-Jie Zeng et al.

Summary: Novel FRP-UHPC tubular members with excellent mechanical properties were developed and demonstrated through three preliminary studies, showcasing their potential in various structural applications.

ENGINEERING STRUCTURES (2022)

Article Mechanics

Behavior of FRP Ring-Confined CFST columns under axial compression

Jun-Jie Zeng et al.

Summary: This study focuses on strengthening CFST columns with FRP rings to increase their load capacity and improve their performance under compression. Experimental results show that FRP rings substantially enhance the ultimate load capacity and slightly enhance the yield strength of CFST columns.

COMPOSITE STRUCTURES (2021)

Article Mechanics

Compound concrete-filled FRP tubular columns under cyclic axial compression

J. K. Zhou et al.

Summary: The study presents experimental results on compound concrete filled FRP tubular columns, demonstrating that the use of external FRP confining tubes can improve the mechanical properties and durability of concrete. The inclusion of RCLs has a marginal effect on the cyclic stress-strain behavior of FRP-confined concrete.

COMPOSITE STRUCTURES (2021)

Article Mechanics

Analysis-oriented model for FRP confined high-strength concrete: 3D interpretation of path dependency

Jia-Qi Yang et al.

Summary: This paper investigates the mechanism of path dependency in FRP confined HSC and proposes an analysis-oriented model for predicting the behavior of confined HSC more accurately.

COMPOSITE STRUCTURES (2021)

Article Mechanics

Compressive behavior of ultra-high performance concrete confined with FRP

Lik Lam et al.

Summary: This study presents an experimental investigation on the compressive behavior of FRP-confined UHPC, proposing predictive equations and recalibrating a stress-strain model for FRP-confined UHPC. The results show the inadequacy of using a parabolic curve to describe the stress-strain relationship of unconfined UHPC due to its higher strength and more brittle behavior in compression.

COMPOSITE STRUCTURES (2021)

Article Engineering, Civil

Behavior and design-oriented model for elliptical FRP-confined concrete under axial compression

Guipeng Chen et al.

Summary: Elliptical fiber-reinforced polymer (FRP)-confined concrete members have attracted attention for their aesthetics and efficiency. The study explored the behavior of 24 elliptical FRP-confined concrete stub columns under axial compression, finding that increasing FRP confinement enhanced stress and strain capacities, while higher aspect ratios and high-strength concrete had adverse effects on axial behavior. A design-oriented model with wide concrete strength range was developed for better accuracy.

ENGINEERING STRUCTURES (2021)

Article Mechanics

Behavior and modelling of FRP-concrete-steel hybrid double-skin tubular columns under repeated unloading/reloading cycles

B. Zhang et al.

Summary: This paper presents a systematic experimental study on the cyclic stress-strain behavior of concrete in hybrid DSTCs under different loading conditions, investigating the cumulative effect of loading history on stress deterioration and plastic strain of the concrete. It also compares test results with predictions of an existing cyclic stress-strain model, demonstrating the model's accuracy in predicting the complete cyclic stress-strain curve of concrete in hybrid DSTCs.

COMPOSITE STRUCTURES (2021)

Article Mechanics

Compressive behavior and modelling of engineered cementitious composite (ECC) confined with LRS FRP and conventional FRP

Wan-Ying Yuan et al.

Summary: The application of external FRP jackets significantly improves the compressive strength and deformation of core ECC, with LRS FRP-confined ECC exhibiting higher ultimate deformation than conventional FRP-confined ECC. Most existing models are unable to accurately predict the compressive behavior of FRP-confined ECC, leading to the modification of dilation and axial stress-strain models to extend their application to FRP-confined ECC.

COMPOSITE STRUCTURES (2021)

Article Engineering, Civil

Compressive performance of high-strength seawater and sea sand concrete-filled circular FRP-steel composite tube columns

Yang Wei et al.

Summary: The study found that increasing the use of FRP and steel tubes has a significant impact on the axial compressive behavior of HFSCTs, and different confinement materials have different effects on the ultimate stress and ultimate deformation ability of specimens. Additionally, a test database for concrete-filled circular FRP-steel composite tube columns was established by collecting data from 155 samples.

ENGINEERING STRUCTURES (2021)

Article Engineering, Civil

Experimental Study on the Confinement of Concrete Cylinders with Large Rupture-Strain FRP Composites

Nicholas Sirach et al.

Summary: This study systematically investigates the influence of fiber type, fiber thickness, and concrete strength on the behavior of FRP-confined concrete, revealing that the stress-strain response is bilinear when concrete is sufficiently confined, and increasing the confining hoop stiffness can reduce strength reduction after initial concrete cracking. In addition, the minimum confinement stiffness ratio necessary to prevent strength reduction after initial concrete cracking increases as the unconfined concrete strength increases.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2021)

Article Engineering, Civil

A path dependent constitutive model for CFFT column

J. C. M. Ho et al.

ENGINEERING STRUCTURES (2020)

Article Engineering, Civil

FRP-Confined Square Concrete Columns with Section Curvilinearization under Axial Compression

J. Y. Zhu et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2020)

Article Engineering, Civil

Hybrid double tube sections utilising seawater and sea sand concrete, FRP and stainless steel

Ying-Lei Li et al.

THIN-WALLED STRUCTURES (2020)

Article Engineering, Geological

Analytical model of concrete-filled FRP-steel composite tube columns under cyclic axial compression

Yirui Zhang et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

Article Construction & Building Technology

Development and mechanical behaviour of ultra-high-performance seawater sea-sand concrete

Jin-Guang Teng et al.

ADVANCES IN STRUCTURAL ENGINEERING (2019)

Article Construction & Building Technology

Compressive behavior of double-tube concrete columns with an outer square FRP tube and an inner circular high-strength steel tube

Jun-Jie Zeng et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Engineering, Civil

Compressive Behavior of Double-Skin Tubular Columns with High-Strength Concrete and a Filament-Wound FRP Tube

B. Zhang et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2017)

Article Engineering, Civil

Behavior of Concrete-Filled FRP Tubes under Cyclic Axial Compression

B. Zhang et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Article Engineering, Civil

Axial Stress-Strain Model of CFRP-Confined Concrete under Monotonic and Cyclic Loading

Najwa F. Hany et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Article Engineering, Civil

FRP-confined concrete in circular sections: Review and assessment of stress-strain models

Togay Ozbakkaloglu et al.

ENGINEERING STRUCTURES (2013)

Article Construction & Building Technology

Stress-Strain Behavior of Concrete in Hybrid FRP-Concrete-Steel Double-Skin Tubular Columns

T. Yu et al.

JOURNAL OF STRUCTURAL ENGINEERING (2010)

Article Engineering, Civil

Stress-strain model for FRP-confined concrete under cyclic axial compression

L. Lam et al.

ENGINEERING STRUCTURES (2009)

Article Engineering, Civil

Refinement of a Design-Oriented Stress-Strain Model for FRP-Confined Concrete

J. G. Teng et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2009)

Article Construction & Building Technology

Cyclic modeling of FRP-confined concrete with improved ductility

Y. Shao et al.

CEMENT & CONCRETE COMPOSITES (2006)

Article Construction & Building Technology

FRP-confined concrete under axial cyclic compression

L. Lam et al.

CEMENT & CONCRETE COMPOSITES (2006)

Article Construction & Building Technology

Design-oriented stress-strain model for FRP-confined concrete

L Lam et al.

CONSTRUCTION AND BUILDING MATERIALS (2003)