相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Scaling analysis for rapid estimation of lack of fusion porosity in laser powder bed fusion
Pramod R. Zagade et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2023)
Description of anisotropic material response of wire and arc additively manufactured thin-walled stainless steel elements
Nicolas Hadjipantelis et al.
THIN-WALLED STRUCTURES (2022)
Revealing the influence of Fe on Fe-rich phases formation and mechanical properties of cast Al-Mg-Mn-Fe alloys
Yuliang Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Macro/micro-structure and mechanical properties of Al-6Mg-0.3Sc alloy fabricated by oscillating laser-arc hybrid additive manufacturing
Shengchong Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Carbon emission modeling and mechanical properties of laser, arc and laser-arc hybrid welded aluminum alloy joints
Jianzhao Wu et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Periodic microstructure of Al-Mg alloy fabricated by inter-layer hammering hybrid wire arc additive manufacturing: Formation mechanism, microstructural and mechanical characterization
Siyu Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Coaxial laser metal wire deposition of Ti6Al4V alloy: process, microstructure and mechanical properties
Yuan Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Superior printed parts using history and augmented machine learning
Meng Jiang et al.
NPJ COMPUTATIONAL MATERIALS (2022)
An additively manufactured Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy with high specific strength, good thermal stability and excellent corrosion resistance
Jiang Bi et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Effect of Sc Content on the Microstructure and Properties of Al-Mg-Sc Alloys Deposited by Wire Arc Additive Manufacturing
Lingling Ren et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Microstructure Evolution and Mechanical Property Anisotropy of Wire and Arc-Additive-Manufactured Wall Structure Using ER2319 Welding Wires
Mingye Dong et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Regional Control and Optimization of Heat Input during CMT by Wire Arc Additive Manufacturing: Modeling and Microstructure Effects
Furong Chen et al.
MATERIALS (2021)
Wire arc additive manufacturing for repairing aluminium structures in marine applications
M. Vishnukumar et al.
MATERIALS LETTERS (2021)
Selective laser melting Al-3.4Mg-0.5Mn-0.8Sc-0.4Zr alloys: From melting pool to the microstructure and mechanical properties
Junhao Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The response of mechanical property to the microstructure variation of an Al-Mg alloy by adding tin element
Bowei Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Design, manufacturing and applications of auxetic tubular structures: A review
Chen Luo et al.
THIN-WALLED STRUCTURES (2021)
Porosity suppressing and grain refining of narrow-gap rotating laser-MIG hybrid welding of 5A06 aluminum alloy
Xiaoyi Yang et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
A study on obtaining equiaxed prior-p grains of wire and arc additive manufactured Ti-6Al-4V
Jian Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Densification, microstructure and mechanical properties of an Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy printed by selective laser melting
Jiang Bi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The crack healing effect of scandium in aluminum alloys during laser additive manufacturing
N. Qbau et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Microstructure, defects, and mechanical properties of wire plus arc additively manufactured Al-Cu4.3-Mg1.5 alloy
Jianglong Gu et al.
MATERIALS & DESIGN (2020)
Microstructure and mechanical properties of aluminum alloy prepared by laser-arc hybrid additive manufacturing
Miaoran Liu et al.
JOURNAL OF LASER APPLICATIONS (2020)
Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms
Ruidi Li et al.
ACTA MATERIALIA (2020)
HF pulse effect on microstructure and properties of AC TIG butt-welded joint of 6061Al alloy
Yajie Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Al3(Sc, Zr) precipitation in deformed Al-Mg-Mn-Sc-Zr alloy: Effect of annealing temperature and dislocation density
Jingyu Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
An investigation of thermal stability of structure and mechanical properties of Al-0.5Mg-Sc ultrafine-grained aluminum alloys
V. N. Chuvil'deev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Wire Arc Additive Manufacturing (WAAM) of Aluminum Alloy AlMg5Mn with Energy-Reduced Gas Metal Arc Welding (GMAW)
Maximilian Gierth et al.
MATERIALS (2020)
Application of laser-arc hybrid welding of steel for low-temperature service
Ivan Bunaziv et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of heat input on microstructure and mechanical properties of Al-Mg alloys fabricated by WAAM
Chuanchu Su et al.
APPLIED SURFACE SCIENCE (2019)
Effect of characteristic substrate parameters on the deposition geometry of CMT additive manufactured Al-6.3%Cu alloy
Xuewei Fang et al.
APPLIED THERMAL ENGINEERING (2019)
Laser stabilization of GMAW additive manufacturing of Ti-6Al-4V components
Goncalo Pardal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Grain size evolution under different cooling rate in laser additive manufacturing of superalloy
Jiayun Shao et al.
OPTICS AND LASER TECHNOLOGY (2019)
Microstructure and mechanical properties of a novel Sc and Zr modified 7075 aluminum alloy prepared by selective laser melting
Jiang Bi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influences of synergy effect between laser and arc on laser-arc hybrid welding of aluminum alloys
Chen Zhang et al.
OPTICS AND LASER TECHNOLOGY (2019)
Microstructure and mechanical properties of a novel selective laser melted Al-Mg alloy with low Sc content
A. Yu Churyumov et al.
MATERIALS RESEARCH EXPRESS (2019)
Microstructure, texture and mechanical properties of 6061 aluminum laser beam welded joints
Qiaoling Chu et al.
MATERIALS CHARACTERIZATION (2018)
Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source
Chen Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Formation and improvement of surface waviness for additive manufacturing 5A06 aluminium alloy component with GTAW system
Haibin Geng et al.
RAPID PROTOTYPING JOURNAL (2018)
Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys
A. B. Spierings et al.
MATERIALS & DESIGN (2018)
Numerical simulation of VPPA-GMAW hybrid welding of thick aluminum alloy plates considering variable heat input and droplet kinetic energy
Zhenbang Sun et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Additive manufacturing of ITER first wall panel parts by two approaches: Selective laser melting and electron beam melting
Yuan Zhong et al.
FUSION ENGINEERING AND DESIGN (2017)
Characterisation of a novel Sc and Zr modified Al-Mg alloy fabricated by selective laser melting
Yunjia Shi et al.
MATERIALS LETTERS (2017)
Influences of Growth Velocity and Fe Content on Microstructure, Microhardness and Tensile Properties of Directionally Solidified Al-1.9Mn-xFe Ternary Alloys
Emin Cadirli et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)
SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment
A. B. Spierings et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
A. B. Spierings et al.
MATERIALS & DESIGN (2017)
Application of hybrid laser arc welding for the joining of large offshore steel foundations
Morten Kristiansen et al.
16TH NORDIC LASER MATERIALS PROCESSING CONFERENCE, NOLAMP16 (2017)
Influence of the degree of scandium supersaturation on the precipitation kinetics of rapidly solidified Al-Mg-Sc-Zr alloys
J. Taendl et al.
ACTA MATERIALIA (2016)
Effect of power distribution on the weld quality during hybrid laser welding of an Al-Mg alloy
P. Leo et al.
OPTICS AND LASER TECHNOLOGY (2015)
A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)
Donghong Ding et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2015)
Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3% Cu alloy
Baoqiang Cong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Fatigue crack growth behavior of Al-Mg-Sc alloy
Mengjia Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of Sc and Zr microalloying additions on the microstructure and mechanical properties of new Al-Zn-Mg alloys
Ying Deng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Effects of homogenization on microstructures and properties of a new type Al-Mg-Mn-Zr-Ti-Er alloy
L. Z. He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Metal direct prototyping by using hybrid plasma deposition and milling
Xinhong Xiong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Microstructure and mechanical properties of AA7075(T6) hybrid laser/GMA welds
B. Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Composition evolution of nanoscale Al3Sc precipitates in an Al-Mg-Sc alloy: Experiments and computations
EA Marquis et al.
ACTA MATERIALIA (2006)
Precipitation of Al3Sc in binary Al-Sc alloys
GM Novotny et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Creep properties of Al3Sc and Al3(Sc, X) intermetallics
Y Harada et al.
ACTA MATERIALIA (2000)
Effect of minor Sc and Zr on the microstructure and mechanical properties of Al-Mg based alloys
ZM Yin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)