☆ 4.7 Article

Numerical investigation of controllable non-uniform deformation of tailor-welded blanks using heterogeneous pressure-carrying medium

THIN-WALLED STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Characterization of Residual Stresses in Conventional Forming and Hydroforming of Tailor Welded Blanks

Amit Kumar et al.

Summary: This study investigates the influence of different processing techniques on the residual stress distribution in tailor welded blanks. The results show that hydroforming leads to lower and more uniformly distributed residual stresses, which can be beneficial for automotive applications.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Thickness analysis of complex two-step micro-groove on plate during rubber pad forming process

Fei Teng et al.

Summary: This paper discusses the different functions of surface groove structures based on their shapes and innovative methods for designing new micro-grooves. By using a model and experiments, the accuracy of the analytical model in calculating results is verified.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical studies on the influence of formability of AISI 316L tailor-welded blanks at different weld line orientations

A. Rajesh Kannan et al.

Summary: The research found that the orientation of the weld line relative to the rolling direction has a significant impact on the engineering stress-strain curve and formability characteristics of tailor-welded blanks (TWBs). Compared to the base material, the formability of TWBs slightly decreases, with fractures appearing in the thinner regions.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

添加到收藏夹

Article Automation & Control Systems

Assessment of different ductile damage models of AA5754 for cold forming

Mohamed Mohamed et al.

Summary: Aluminum alloys have low formability limits under cold forming conditions. Predicting deformation and failure accurately can optimize forming process parameters and reduce tooling modifications and materials costs. Various ductile damage models have been developed to quantify and predict the behavior of aluminum sheet metal under complex forming conditions, but there is a need for a robust model that can provide realistic predictions. This study investigated the prediction capabilities of different damage models for AA-5754 during the cold forming process, using experimental data and FE software to validate the models. The novel CDM model showed good agreement with experimental results from formability tests.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Mechanics

Fracture Response in Hot-Stamped Tailor-Welded Blanks of Ductibor® 500-AS and Usibor® 1500-AS: Experiments and Modelling

Pedram Samadian et al.

Summary: This study investigated the fracture behavior of hot-stamped tailor-welded blanks (TWBs) composed of different steel sheets through experiments and numerical simulations. Variation in fracture locations and initiation points were observed between weld fractures and parent metal fractures, and the impact of hardness on model predictions was discussed.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Cold forming of Al-5251 and Al-6082 tailored welded blanks manufactured by laser and electron beam welding

Himanshu Lalvani et al.

Summary: This study demonstrates the applicability of electron beam welding and laser beam welding techniques in manufacturing tailored welded blanks from different aluminum sheets. With an optimal post-weld heat treatment, improvements in elongation and hardness distribution of the welds were achieved, allowing for cold forming at ambient temperature.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and dynamic tensile characteristics of dissimilar fiber laser welded advanced high strength steels

M. H. Razmpoosh et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Tailor Welded Partition Blanks: New Methods Improve the Ductility of Ultra-high-strength Welded Joint

Fei Xing et al.

ISIJ INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Manufacturing

Application of pre-deformation rolling in the welding heat-affected zone of tailor-welded blanks formed by deep-drawing process

Hao Zengliang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Civil

Weld orientation effects on the formability of tailor welded thin steel sheets

Hossein Moayedi et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Energy & Fuels

Design and fabrication of novel interconnectors for solid oxide fuel cells via rubber pad forming

Bora Timurkutluk et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

添加到收藏夹

Article Engineering, Manufacturing

Tailor layered tube hydroforming for fabricating tubular parts with dissimilar thickness

Sangwook Han et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

添加到收藏夹

Article Engineering, Mechanical

Optimization of multi-objective quality of TWBs square box deep-drawing process parameters

Liu Yang et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Industrial

Formability behavior of Al/steel MIG arc brazed-fusion welded joint

Guoliang Qin et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Microstructure, forming limit diagram, and strain distribution of pre-strained DP-IF steel tailor-welded blank for auto body application

Shamik Basak et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Numerical investigation on forming behavior of friction stir tailor welded blanks (FSTWBs) during single-point incremental forming (SPIF) process

Shalin Prakashbhai Marathe et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Maximum Bulge Height and Weld Line Displacement in Hydroforming of Tailor Welded Blanks

A. Kumar et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Manufacturing

Assessment of different ductile damage models and experimental validation

Rui Amaral et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2018)

添加到收藏夹

Article Engineering, Industrial

Transition of failure mode in hot stamping of AA6082 tailor welded blanks

Jun Liu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

Experimental investigation of formability of Al-1050 tailor-welded blanks

Mahmoud E. Abdullah et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Automation & Control Systems

Manufacturing metallic bipolar plate fuel cells through rubber pad forming process

Majid Elyasi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Physical

Integration of finite element analysis and design of experiment for the investigation of critical factors in rubber pad forming of metallic bipolar plates for PEM fuel cells

Roza Kolandooz et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Forming Limit Investigation of AA6061 Friction Stir Welded Blank in a Single Point Incremental Forming Process: RSM Approach

Iman Alinaghian et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Forming Limit and Thickness Transition Zone Movement for Tailor Rolled Blank during Drawing Process

Hua-wei Zhang et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2016)

添加到收藏夹

Article Engineering, Industrial

Hot stamping of boron steel sheets with tailored properties: A review

Marion Merklein et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

添加到收藏夹

Article Chemistry, Physical

Process Design of Aluminum Tailor Heat Treated Blanks

Alexander Kahrimanidis et al.

MATERIALS (2015)

添加到收藏夹

Article Automation & Control Systems

Analytical method for prediction of weld line movement during stretch forming of tailor-welded blanks

M. Abbasi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

添加到收藏夹

Review Engineering, Industrial

A review on tailored blanks-Production, applications and evaluation

Marion Merklein et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and numerical assessment of mechanical properties of welded tubes for hydroforming

Ali Khalfallah

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Determination of local constitutive properties of aluminium friction stir welds using digital image correlation

C. Leitao et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

A method for establishing the plastic constitutive relationship of the weld bead and heat-affected zone of welded tubes based on the rule of mixtures and a microhardness test

Mei Zhan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Engineering, Industrial

Single point incremental forming of tailored blanks produced by friction stir welding

M. B. Silva et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Industrial

Improvement in formability of tailor welded blanks by application of counter pressure in biaxial stretch forming

Sushanta Kumar Panda et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.