4.5 Article

Kinetics of the oxidative aging of phthalonitrile resins and their effects on the mechanical properties of thermosets

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Fluorinated Phthalonitrile Resin with Excellent Thermal Stability and Low Dielectric Constant for High-Frequency Electronic Packaging

Minjie Wu et al.

Summary: The fluorinated PN oligomer designed in this study exhibits excellent thermal stability and mechanical properties, along with low dielectric constant and dielectric loss at 10 GHz. It also has low water absorption, making it suitable for high-tech applications in aerospace and communication electronic devices.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

Article Chemistry, Multidisciplinary

Novel self-promoted phthalonitrile monomer with siloxane segments: synthesis, curing kinetics, and thermal properties

Ting Wang et al.

Summary: A new autocatalytic phthalonitrile monomer (TSOP) containing siloxane segments and secondary amino groups was synthesized. The TSOP monomer exhibited self-catalytic behavior, with the secondary amino groups accelerating the crosslinking polymerization reaction of cyano groups. The TSOP monomer had a low melting point and a wide processing window, while its polymer showed a high glass transition temperature and good thermal stability.

NEW JOURNAL OF CHEMISTRY (2022)

Article Polymer Science

High performance green composite from vanillin-based benzoxazine containing phthalonitrile and silane surface modified basalt fibers

Mehdi Derradji et al.

Summary: This study developed a new thermosetting system of benzoxazine containing phthalonitrile, using renewable resources such as vanillin and reinforced with silane surface modified basalt fibers. The resulting green composite exhibited remarkable mechanical properties and showed promise as a substitute for composites made from glass fibers.

HIGH PERFORMANCE POLYMERS (2022)

Article Chemistry, Multidisciplinary

High performance carbon-carbon composites obtained by a two-step process from phthalonitrile matrix composites

Vladislav V. Aleshkevich et al.

Summary: Carbon-carbon composites (C/C) were produced by transforming carbon fiber reinforced phthalonitrile (CFRP) matrix composites into C/C through a two-step process, resulting in highly crystalline structure and properties.

MENDELEEV COMMUNICATIONS (2022)

Article Polymer Science

Fast-Processable Non-Flammable Phthalonitrile-Modified Novolac/Carbon and Glass Fiber Composites

Daria Poliakova et al.

Summary: This study successfully reduced the processing time of phthalonitrile resin by synthesizing a novel novolac oligomer with fully substituted phthalonitrile moieties and optimizing the curing program based on various factors. The resulting resin exhibited stability at high temperatures and high-performance composite laminates were fabricated using hot-pressing of prepregs.

POLYMERS (2022)

Article Materials Science, Multidisciplinary

Heat-Resistant Phthalonitrile-Based Resins for 3D Printing via Vat Photopolymerization

Sergey Nechausov et al.

Summary: In this study, phthalonitrile-containing polymers were prepared using a maleimide/phthalonitrile bifunctional monomer via vat photopolymerization. The glass transition temperatures of the 3D printed materials were increased up to 351 degrees C after additional thermal postcuring.

ACS APPLIED POLYMER MATERIALS (2022)

Article Polymer Science

Improved mechanical properties of basalt fiber/phthalonitrile composites modified by thermoplastic Poly(phthalazinone ether nitrile)s

Cheng Liu et al.

Summary: This study investigates the performance and mechanism of composites reinforced with PPEN and PPENK, showing that they can significantly enhance the mechanical properties and thermal resistance of the composites.

POLYMER (2021)

Article Chemistry, Applied

Low-melting phthalonitrile monomers containing maleimide group: Synthesis, dual-curing behavior, thermal and mechanical properties

S. S. Nechausov et al.

Summary: Novel dual-functional phthalonitrile monomers containing a maleimide group were synthesized and characterized, showcasing a combination of bismaleimide resins' mechanical properties and phthalonitriles' thermo-oxidative stability. The copolymerization of maleimide groups via ene reaction and ring-opening amidation allowed the formation of a polymeric system with high impact strength, flexural strength, and excellent thermal properties.

REACTIVE & FUNCTIONAL POLYMERS (2021)

Review Polymer Science

Bisphthalonitrile-based Thermosets as Heat-resistant Matrices for Fiber Reinforced Plastics

B. A. Bulgakov et al.

Summary: This review focuses on the processes of producing heat-resistant matrices for fiber reinforced plastics using phthalonitrile monomers and comonomers, and discusses polymerization behaviors with various initiators and temperature modes. It also compares the properties of glass fiber reinforced plastics (GFRP) and carbon fiber reinforced plastics (CFRP) obtained through curing of different phthalonitriles.

POLYMER SCIENCE SERIES C (2021)

Review Thermodynamics

ICTAC Kinetics Committee recommendations for analysis of multi-step kinetics

Sergey Vyazovkin et al.

THERMOCHIMICA ACTA (2020)

Article Chemistry, Multidisciplinary

Fluorinated phthalonitrile resins with improved thermal oxidative stability

Vladimir E. Terekhov et al.

MENDELEEV COMMUNICATIONS (2020)

Article Thermodynamics

Kinetics of the pyrolysis process of phthalonitrile resin

Bo Liang et al.

THERMOCHIMICA ACTA (2019)

Article Engineering, Multidisciplinary

Enhanced mechanical properties at 400 °C of carbon fabric reinforced phthalonitrile composites by high temperature postcure

Bao-Gang Sun et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Engineering, Chemical

Phthalonitrile-Terminated Silicon-Containing Oligomers: Synthesis, Polymerization, and Properties

Guangxing Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Article Chemistry, Applied

Bis(4-cyanophenyl) phenyl phosphate as viscosity reducing comonomer for phthalonitrile resins

V. E. Terekhov et al.

REACTIVE & FUNCTIONAL POLYMERS (2019)

Article Polymer Science

TG-MS-FTIR study on pyrolysis behavior of phthalonitrile resin

Bo Liang et al.

POLYMER DEGRADATION AND STABILITY (2019)

Article Polymer Science

Thermal and oxidative behavior of a tetraphenylsilane-containing phthalonitrile polymer

William J. Monzel et al.

HIGH PERFORMANCE POLYMERS (2019)

Article Polymer Science

Sustainable, Fire-Resistant Phthalonitrile-Based Glass Fiber Composites

Matthew Laskoski et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2018)

Article Chemistry, Multidisciplinary

Carbon fabric reinforced propargyl ether/phthalonitrile composites produced by vacuum infusion

Boris A. Bulgakov et al.

MENDELEEV COMMUNICATIONS (2018)

Article Instruments & Instrumentation

Toward advanced gamma rays radiation resistance and shielding efficiency with phthalonitrile resins and composites

Mehdi Derradji et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2018)

Review Polymer Science

Isoconversional Kinetics of Polymers: The Decade Past

Sergey Vyazovkin

MACROMOLECULAR RAPID COMMUNICATIONS (2017)

Article Thermodynamics

Thermal degradation kinetics of plastics and model selection

Pallab Das et al.

THERMOCHIMICA ACTA (2017)

Article Polymer Science

Mechanical and thermal properties of modified bismaleimide matrices toughened by polyetherimides and polyimide

Alexander V. Babkin et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2016)

Article Polymer Science

Low-melting phthalonitrile thermosetting monomers with siloxane- and phosphate bridges

B. A. Bulgakov et al.

EUROPEAN POLYMER JOURNAL (2016)

Article Materials Science, Multidisciplinary

High performance ceramic-based phthalonitrile micro and nanocomposites

Mehdi Derradji et al.

MATERIALS LETTERS (2016)

Article Polymer Science

Thermally Stable Phthalonitrile Matrixes Containing Siloxane Fragments

A. V. Babkin et al.

POLYMER SCIENCE SERIES B (2016)

Review Polymer Science

Silicone containing copolymers: Synthesis, properties and applications

Emel Yilgor et al.

PROGRESS IN POLYMER SCIENCE (2014)

Article Thermodynamics

Determination of kinetic mechanisms for reactions measured with thermoanalytical instruments

Elena Moukhina

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2012)

Article Polymer Science

Effects of silphenylene units on the thermal stability of silicone resins

Zhizhou Yang et al.

POLYMER DEGRADATION AND STABILITY (2011)

Review Chemistry, Physical

Solid-state kinetic models: Basics and mathematical fundamentals

Ammar Khawam et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2006)

Article Chemistry, Organic

Structure, polymorphism and thermal properties of phenyliminoisoindolines

ZQ Zhang et al.

JOURNAL OF PHYSICAL ORGANIC CHEMISTRY (2004)

Article Polymer Science

Flame retardant novolac-bisphthalonitrile structural thermosets

MJ Sumner et al.

POLYMER (2002)

Article Polymer Science

Kinetic aspects of the thermal degradation of poly(dimethyl siloxane) and poly(dimethyl diphenyl siloxane)

G Deshpande et al.

POLYMER DEGRADATION AND STABILITY (2002)

Article Polymer Science

Thermal and thermo-oxidative ageing of an epoxy adhesive

X Buch et al.

POLYMER DEGRADATION AND STABILITY (2000)