☆ 4.7 Article

A comprehensive study on the influence of T-stress term on crack initiation angle in orthotropic materials based on the modification of MTS, MSS, SER and SED criteria

THEORETICAL AND APPLIED FRACTURE MECHANICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Maximum principal strain criterion for fracture in orthotropic composites under combined tensile/shear loading

M. M. Mirsayar

Summary: This paper presents a strain-based criterion for investigating mixed-mode I/II fracture behavior in orthotropic materials. The criterion predicts the onset of mixed-mode I/II fracture by considering the T-stress effect and singular terms, and explores the role of T-stress in the fracture toughness assessment. The accuracy of the proposed criterion is evaluated by predicting fracture test data for wood species and laminated composites, and it is shown to be superior to other criteria in predicting the onset of mixed-mode I/II fracture in orthotropic materials.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

On the role of fracture process zone size in specifying fracturing mechanism under dominant mode II loading

Ali Aminzadeh et al.

Summary: The study shows a tension-based fracturing type prevailing in the DNBD samples of polymethyl-methacrylate (PMMA). A comparison between PMMA and rock samples demonstrates the main reason for the different observed fracturing types.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

A suitable mixed mode I/II test specimen for fracture toughness study of polyurethane foam with different cell densities

D. M. Imani et al.

Summary: Rigid foam materials can experience catastrophic failure under mechanical loads due to low fracture toughness. A suitable test specimen called Asymmetric Edge Notch Disc Bend (AENDB) was proposed for conducting mixed mode I/II fracture experiments on polyurethane foam, with finite element analyses used to determine the stress intensity factors. Experimental results showed that increasing foam density can improve the fracture toughness data for all mode mixities, while the AENDB specimen exhibited lower mixed mode fracture curves and initiation directions compared to other test samples.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

A Semi-theoretical criterion based on the combination of strain energy release rate and strain energy density concepts (STSERSED): Establishment of a new approach to predict the fracture behavior of orthotropic materials

Zahra Khaji et al.

Summary: This article proposes a Semi-theoretical criterion for assessing the fracture of composite materials. The criterion utilizes experimental data under mixed-mode I/II loading to accurately predict the fracture behavior of orthotropic materials. Fitting experimental data into the criterion improves the accuracy of fracture estimation.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

In-situ optical approach to predict mixed mode fracture in a polymeric biomaterial

Saeid Ghouli et al.

Summary: This article promotes the usage of digital image correlation (DIC) technique for determining in-situ stress and predicting fracture in cracked dental biomaterial samples. The elastic and fracture properties of the dental material are measured using DIC method, and a modified single edge notched bend (SENB) specimen with varying crack length is utilized for mixed mode fracture experiments. A stress-based fracture criterion is implemented and combined with two different critical distance models. In-situ stress is calculated using DIC analysis data and supervised learning algorithm, and the crack growth angle and fracture load for the tested biomaterial specimens are estimated, showing good correlation with experimental measurements.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Theoretical and Experimental Study considering the Influence of T-Stress on the Fracture Behavior of Compression-Shear Crack

Mingyu Feng et al.

Summary: This paper comprehensively considers the influence of the nonsingular stress term (T-stress) on the fracture behavior of compressive-shear cracks. An improved crack initiation criterion is proposed, which can predict the crack initiation angles and failure modes more accurately.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Mechanics

Examining the effect of crack initiation angle on fracture behavior of orthotropic materials under mixed-mode I/II loading

Zahra Khaji et al.

Summary: This research adapts the maximum strain energy release rate concept to predict the fracture response of orthotropic materials under mixed-mode I / II loading, investigating the effect of crack initiation angle on fracture behavior. By validating the Adaptive Maximum Strain Energy Release Rate criterion, the fracture behavior of orthotropic materials is extracted and the accurate prediction of crack initiation angle is proven.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Applying the new experimental midpoint concept on strain energy density for fracture assessment of composite materials

Zahra Khaji et al.

Summary: A mixed-mode I/II fracture criterion, called Improved Strain Energy Density with Mid-point (ISEDM), is proposed in this paper to predict the fracture response of composite materials. The criterion takes into account the physics of fracture onset and different damage mechanisms near the crack tip. By considering the effects of the fracture process zone (FPZ) and T-stress, the ISEDM criterion accurately predicts the mixed-mode fracture process, especially when mode II is dominant.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

An extended maximum tangential strain energy density criterion considering T-stress for combined mode I-III brittle fracture

Wen Hua et al.

Summary: This study modified the MTSED criterion to consider stress intensity factors and T-stress for combined mode I-III brittle fracture. The influence of Poisson's ratio and T-stress on fracture characteristics of cracked components was discussed, showing significant effects on fracture resistance ratios, especially for pure mode III. Positive T-stress increases fracture resistance ratio while negative T-stress has the opposite effect. Predicted values by the extended MTSED criterion agree well with testing data, particularly for pure mode III cases.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Article Mechanics

The effect of T-stress on mixed mode I/II fracture of composite materials: Reinforcement isotropic solid model in combination with maximum shear stress theory

Mahdi Fakoor et al.

Summary: A new mixed mode I/II fracture criterion is proposed in this research, combining MSS theory and RIS concept for fracture investigation of orthotropic materials. RIS, based on the fact that cracks generally propagate along fibers, accurately predicts crack initiation and propagation direction.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

A combined stress/energy-based criterion for mixed-mode fracture of laminated composites considering fiber bridging micromechanics

M. M. Mirsayar

Summary: A combined stress/energy-based criterion has been developed to predict mixed mode I/II fracture behavior in laminated composites, taking into account the effect of fiber bridging toughening. The criterion shows a higher correlation in predicting experimental data, offers a simpler computational method compared to energy-based criteria, and considers the effect of absorbed energy from micromechanical fiber bridging in the solution.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Geological

Influences of Loading Method and Notch Type on Rock Fracture Toughness Measurements: From the Perspectives of T-Stress and Fracture Process Zone

Mingdong Wei et al.

Summary: Understanding the influences of notch types and loading methods on K-Ic measurements is crucial. The combined effects of T-stress and FPZ play a significant role in explaining the experimental results.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Strain energy release rate in combination with reinforcement isotropic solid model (SERIS): A new mixed-mode I/II criterion to investigate fracture behavior of orthotropic materials

Zahra Khaji et al.

Summary: The new fracture criterion SERIS, based on the concept of strain energy release rate, is proposed for orthotropic materials to predict crack initiation angle and stress intensity factors in mode I and II loading. Experimental validation shows good agreement between SERIS criterion and experimental data.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Mechanics

Verification of reinforcement isotropic solid model in conjunction with maximum shear stress criterion to anticipate mixed mode I/II fracture of composite materials

Sadra Shahsavar et al.

ACTA MECHANICA (2020)

添加到收藏夹

Article Engineering, Mechanical

A micromechanical approach for mixed mode I/II failure assessment of cracked highly orthotropic materials such as wood

Mahdi Fakoor et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fracture Behavior of Two Biopolymers Containing Notches: Effects of Notch Tip Plasticity

Sahel Shahbaz et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Mechanical

Mixed mode I/II fracture criterion for arbitrary cracks in orthotropic materials considering T-stress effects

Hannaneh Manafi Farid et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

添加到收藏夹

Article Mechanics

Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading

Zahra Daneshjoo et al.

ENGINEERING FRACTURE MECHANICS (2019)

添加到收藏夹

Article Engineering, Mechanical

Fracture load prediction under mixed mode I plus II using a stress based method for brittle materials tested with the asymmetric four-point bend specimen

M. R. M. Aliha et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

添加到收藏夹

Article Mechanics

Mixed-mode I/II fracture criterion for crack initiation assessment of composite materials

Mahdi Fakoor et al.

ACTA MECHANICA (2019)

添加到收藏夹

Article Engineering, Mechanical

T-strain effects in kinked interfacial fracture of bonded composites

M. M. Mirsayar

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

添加到收藏夹

Article Engineering, Mechanical

Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion

A. R. Torabi et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Numerical Analysis of Crack Initiation Direction in Quasi-brittle Materials: Effect of T-Stress

A. S. Fayed

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)

添加到收藏夹

Article Mechanics

A new macro-mechanical approach for investigation of damage zone effects on mixed mode I/II fracture of orthotropic materials

Mahdi Fakoor et al.

ACTA MECHANICA (2018)

添加到收藏夹

Article Mechanics

Wing-crack initiation angle: A new maximum tangential stress criterion by considering T-stress

Hongyan Liu

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Engineering, Mechanical

General mixed mode I/II failure criterion for composite materials based on matrix fracture properties

Mandi Fakoor et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)

添加到收藏夹

Article Mechanics

Augmented Strain Energy Release Rate (ASER): A novel approach for investigation of mixed-mode I/II fracture of composite materials

M. Fakoor

ENGINEERING FRACTURE MECHANICS (2017)

添加到收藏夹

Article Mechanics

Mixed mode I/II fracture criterion for orthotropic materials based on damage zone properties

M. Fakoor et al.

ENGINEERING FRACTURE MECHANICS (2016)

添加到收藏夹

Review Mechanics

A review of T-stress and its effects in fracture mechanics

M. Gupta et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Mechanics

T-stress effects on crack kinking in Finite Fracture Mechanics

Pietro Cornetti et al.

ENGINEERING FRACTURE MECHANICS (2014)

添加到收藏夹

Article Materials Science, Characterization & Testing

Fracture investigation of wood under mixed mode I/II loading based on the maximum shear stress criterion

M. Fakoor et al.

STRENGTH OF MATERIALS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Maximum Average Tangential Stress Criterion for Prediction of the Crack Path

Yu. G. Matvienko

INTERNATIONAL JOURNAL OF FRACTURE (2012)

添加到收藏夹

Article Engineering, Mechanical

A new mixed-mode fracture criterion for orthotropic materials, based on strength properties

A. R. Gowhari Anaraki et al.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mixed mode fracture criterion for wood based on a reinforcement microcrack damage model

A. R. Gowhari Anaraki et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Mechanics

A quantitative evaluation of fatigue crack shielding forces using photoelasticity

C. J. Christopher et al.

ENGINEERING FRACTURE MECHANICS (2008)

添加到收藏夹

Article Mechanics

Verification of a non-local stress criterion for mixed mode fracture in wood

Marek Romanowicz et al.

ENGINEERING FRACTURE MECHANICS (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Failure criteria for brittle elastic materials

Z Yosibash et al.

INTERNATIONAL JOURNAL OF FRACTURE (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mode I cracks subjected to large T-stresses

MR Ayatollahi et al.

INTERNATIONAL JOURNAL OF FRACTURE (2002)

添加到收藏夹

Article Mechanics

Fracture of wood under mixed mode loading I. Derivation of fracture criteria

LO Jernkvist

ENGINEERING FRACTURE MECHANICS (2001)

添加到收藏夹

Article Mechanics

Fracture of wood under mixed mode loading II.: Experimental investigation of Picea abies

LO Jernkvist

ENGINEERING FRACTURE MECHANICS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.