4.7 Review

Fatigue behaviour of plain and reinforced concrete: A systematic review

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Effect of temperature on fatigue behaviour of self-compacting recycled aggregate concrete

Jose A. Sainz-Aja et al.

Summary: It has been found that conducting concrete fatigue tests at high frequencies significantly lowers the fatigue limit, and temperature affects the extent of creep damage.

CEMENT & CONCRETE COMPOSITES (2022)

Article Mechanics

Specimen and aggregate size effect on the dynamic fracture parameters of concrete under high loading rates

Masoud Rezaei et al.

Summary: This paper presents a comprehensive experimental investigation of the dynamic size effect and fracture characteristics of concrete, exploring the effect of structural size and aggregate size on the dynamic strength of concrete.

ENGINEERING FRACTURE MECHANICS (2022)

Article Mechanics

Modelling fracture process zone width and length for quasi-brittle fracture of rock, concrete and ceramics

Xiaozhi Hu et al.

Summary: This study provides a fresh perspective on quasi-brittle fracture phenomena by analyzing the width and length of the crack-tip fracture process zone (FPZ), and establishes a model containing these two parameters to analyze experimental data.

ENGINEERING FRACTURE MECHANICS (2022)

Article Computer Science, Interdisciplinary Applications

A deep learning framework for constitutive modeling based on temporal convolutional network

Jia-Ji Wang et al.

Summary: A novel deep learning framework utilizing the Temporal Convolutional Network (TCN) model is proposed for simulating ultra-long-history-dependent stress-strain constitutive models. The TCN model demonstrates higher prediction accuracy and efficiency in constitutive modeling compared to traditional methods.

JOURNAL OF COMPUTATIONAL PHYSICS (2022)

Article Engineering, Civil

Study of Microstructure of Concrete Pavement Exposed to Alternate Load and Temperature Effect

Xiaolong Yang et al.

Summary: This study investigates the microstructure properties and properties change of concrete under fatigue load and temperature coupling effect. The results indicate that the coupling function significantly influences the concrete properties, and different deterioration mechanisms can be observed under low temperature and high temperature conditions. Additionally, micro-cracks and ITZ-structure are identified as the major factors affecting the macroscopic properties of concrete.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING (2022)

Article Mechanics

Size effects in unreinforced and lightly reinforced concrete beams failing in flexure

Levingshan Augusthus-Nelson et al.

Summary: The aim of this study is to develop an analytical size effect model based on fundamental material and geometric properties for concrete beams that fail due to unstable crack propagation. The proposed approach takes into account the influence of concrete strength and the size effect mitigation caused by the inclusion of longitudinal reinforcement, and shows potential for application to other brittle materials and non-conventional reinforcing materials.

ENGINEERING FRACTURE MECHANICS (2022)

Article Construction & Building Technology

Size effect on the compressive fatigue of fibre-reinforced concrete

J. J. Ortega et al.

Summary: The size effect on the compressive fatigue behavior of fiber-reinforced concrete is studied. The fatigue response of the 40-mm specimens showed a significant size effect, with higher numbers of cycles than expected. Additionally, the average residual strength of the run-out specimens increased by 42% due to cyclic loads. The fatigue creep of the material presented a size-independent linear relationship that can predict the fatigue life of run-out specimens. Despite an increase in size, the strain upon failure decreased while the crack patterns remained similar.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Engineering, Mechanical

Physics-informed machine learning model for computational fracture of quasi-brittle materials without labelled data

Bin Zheng et al.

Summary: This study focuses on using physically-informed neural networks to simulate the crack propagation of quasi-brittle materials under complex loading. By minimizing energy, we use neural networks to predict crack propagation while maintaining thermodynamic consistency. The results show that our proposed method accurately predicts displacement fields under different loading conditions.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Article Construction & Building Technology

Residual strength of concrete subjected to fatigue based on machine learning technique

Wei Zhang et al.

Summary: This study employs machine learning techniques to address the complex fatigue problem of concrete materials. Various learning algorithms were trained using experimental data to estimate fatigue life, and a concrete strength degradation model was proposed.

STRUCTURAL CONCRETE (2022)

Article Construction & Building Technology

Mechanical properties and damage constitutive model of concrete under low-temperature action

Qianyun Wu et al.

Summary: This study investigates the effect of temperature on the mechanical properties and damage characteristics of concrete. It is found that the mass loss rate of concrete increases under low temperature, while the longitudinal wave velocity, compressive strength, and splitting tensile strength decrease.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Mechanics

Study on the dynamic fracture properties and size effect of concrete based on DIC technology

Huiheng Lian et al.

Summary: The fracture properties of concrete are significantly influenced by size effect and strain rate effect. Parameters such as fracture load, fracture energy, and crack initiation toughness show variations with changes in strain rate and span to height ratio. The rapid crack propagation period and strain rate effect tend to weaken with increasing span to height ratio.

ENGINEERING FRACTURE MECHANICS (2022)

Review Mechanics

Fracture process zone (FPZ) in quasi-brittle materials: Review and new insights from flawed granite subjected to uniaxial stress

Jian-Zhi Zhang et al.

Summary: This study discusses the developments and contributions of experimental studies on the fracture process zone (FPZ) in quasi-brittle materials, and aims to establish a better understanding of stable and unstable crack growth from the FPZ perspective. It also points out the limited knowledge on the correlations between cracking levels and FPZ evolution patterns.

ENGINEERING FRACTURE MECHANICS (2022)

Article Chemistry, Multidisciplinary

A New Approach to Machine Learning Model Development for Prediction of Concrete Fatigue Life under Uniaxial Compression

Jaeho Son et al.

Summary: This study demonstrates the application of machine learning models to predict the fatigue life of plain concrete, with the gradient boosting model showing high accuracy and the average data excluding outliers performing the best in predicting outcomes. The maximum stress level and loading frequency are identified as the most significant input variables.

APPLIED SCIENCES-BASEL (2022)

Article Construction & Building Technology

Study of fracture properties and post-peak softening process of rubber concrete based on acoustic emission

Miaoyan Liu et al.

Summary: The addition of rubber in concrete extended the softening process, increased the deformation capacity, reduced the number of cracks, and decreased the size of cracks in the concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Fracture mechanics based interpretation of the load sequence effect in the flexural fatigue behavior of concrete using digital image correlation

Abedulgader Baktheer et al.

Summary: This paper presents experimental investigations on concrete behavior under monotonic, cyclic, and fatigue loading, with a particular focus on the influence of loading sequence on fatigue life. The study evaluates various response characteristics of fatigue behavior and analyzes the main dissipative mechanisms governing the flexural behavior of concrete under repeated loading. Additionally, the effect of loading sequence is studied in detail using a 3D digital image correlation (DIC) system, providing a theoretical interpretation considering fatigue crack propagation aspects and stress redistribution around the crack tip.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Mechanics

Prediction of fracture parameters of concrete using an artificial neural network approach

Shilang Xu et al.

Summary: This study collected experimental data from concrete fracture tests to build an artificial neural network (ANN) model for predicting fracture parameters, showing the superior performance of ANN models over existing empirical formulas. By adding more input variables, the accuracy of ANN models was further improved. Additionally, the study discussed the size effect of concrete fracture parameters and deepened the understanding of influential factors.

ENGINEERING FRACTURE MECHANICS (2021)

Article Engineering, Mechanical

Micromechanical Effects of Loading Frequency on Fatigue Fracture in Concrete

K. Keerthana et al.

Summary: The study investigated the effect of loading frequency on fatigue damage process in concrete, finding that different frequencies lead to different mechanisms of failure. At higher frequencies, failure is mainly governed by microcracks, while at lower frequencies both micro- and macro-cracks contribute to fracture. The research proposed a fatigue model that incorporates frequency effects in terms of fracture process zone (FPZ) width.

JOURNAL OF ENGINEERING MECHANICS (2021)

Article Construction & Building Technology

Experimental study on the bond degradation of basalt fiber reinforced polymer grid-concrete interface under fatigue loading

Bo Wen et al.

Summary: This study conducted a series of shear fatigue tests on the BFRP grid-concrete interface at different loading levels to analyze interfacial fatigue failure modes. Based on the test results and the Popovics model, a theoretical model reflecting bond-slip fatigue degradation characteristics was established, providing a reference for the durability and fatigue reinforcement design of FRP grid strengthened concrete structures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Mechanics

Mesoscale modelling of size effect on the evolution of fracture process zone in concrete

Rongxin Zhou et al.

Summary: The study reveals that the concrete fracture process zone tends to exhibit a main crack and multiple secondary microcracks, with the irregular evolution path attributed to the random spatial distribution of aggregate particles and weak ITZ. The size effect has little impact on the width of the FPZ, but the length is strongly dependent on the beam size, and these characteristics are considered intrinsic reasons for the overall size effect phenomenon in concrete structures.

ENGINEERING FRACTURE MECHANICS (2021)

Article Engineering, Mechanical

Predicting the fracture behavior of concrete using artificial intelligence approaches and closed-form solution

Xiangyu Han et al.

Summary: The study attempted to analyze the complex relations between concrete fracture test results and specimen geometries using artificial intelligence methods and Boundary Effect Model, establishing a hybrid AI predictive model with a normal distribution analysis to determine fracture properties and predictive domain, showing excellent performance.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Article Construction & Building Technology

CT image-based synthetic mesostructure generation for multiscale fracture analysis of concrete

Yijia Dong et al.

Summary: This paper proposes a novel method for generating synthetic mesostructures of concrete based on generative adversarial networks, aiming at studying multiscale fracture process of concrete. By integrating the method with cohesive zone model, a systematic scheme is established, and the performance of the method is validated through comparisons with actual CT images.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Concrete compressive strain behavior and magnitudes under uniaxial fatigue loading

Somashekar Viswanath et al.

Summary: While research has mainly focused on determining concrete fatigue capacity, understanding and advancing concrete fatigue behavior is crucial due to its nonlinear properties. Experimental investigation and analysis of concrete axial strain behavior under compressive fatigue loading provide valuable insights and guidelines for fatigue analysis and design.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Mechanics

Machine learning approaches to rock fracture mechanics problems: Mode-I fracture toughness determination

Yun-Teng Wang et al.

Summary: This study demonstrates the feasibility and value of four machine learning approaches for analyzing and predicting Mode-I fracture toughness of rocks, with the random regression forest being more suitable for predicting toughness in ISRM-suggested CCNBD rock tests. The reliable functionality and rapid development of machine learning solutions have shown significant improvement over previous analytical and empirical solutions.

ENGINEERING FRACTURE MECHANICS (2021)

Article Engineering, Mechanical

Effects of the reinforcement ratio and chloride corrosion on the fatigue behavior of RC beams

Jieqiong Wu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Article Construction & Building Technology

Prestress Loss Diagnostics in Pretensioned Concrete Structures with Corrosive Cracking

Lizhao Dai et al.

JOURNAL OF STRUCTURAL ENGINEERING (2020)

Review Engineering, Mechanical

Potential difference methods for measuring crack growth: A review

Y. Si et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Article Construction & Building Technology

Effect of Temperature on Thermal Properties of Ultrahigh-Performance Concrete

Venkatesh Kodur et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)

Article Materials Science, Multidisciplinary

Micromechanics of fracture and failure in concrete under monotonic and fatigue loadings

K. Keerthana et al.

MECHANICS OF MATERIALS (2020)

Article Engineering, Multidisciplinary

Data-driven fracture mechanics

P. Carrara et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

Article Computer Science, Interdisciplinary Applications

Mesoscale informed parameter estimation through machine learning: A case-study in fracture modeling

Nishant Panda et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2020)

Article Mechanics

An experimental approach for characterization of fracture process zone in concrete

Sonali Bhowmik et al.

ENGINEERING FRACTURE MECHANICS (2019)

Article Construction & Building Technology

A novel study for the estimation of crack propagation in concrete using machine learning algorithms

Gokhan Bayar et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Engineering, Mechanical

Role of longitudinal reinforcement on the behavior of under reinforced concrete beams subjected to fatigue loading

M. H. Prashanth et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Chemistry, Physical

ANN-Based Fatigue Strength of Concrete under Compression

Miguel Abambres et al.

MATERIALS (2019)

Article Mechanics

An improved crack propagation model for plain concrete under fatigue loading

Sonali Bhowmik et al.

ENGINEERING FRACTURE MECHANICS (2018)

Article Mechanics

Phase-field regularized cohesive zone model (CZM) and size effect of concrete

De-Cheng Feng et al.

ENGINEERING FRACTURE MECHANICS (2018)

Article Engineering, Civil

Experimental Research on Fatigue Damage of Reinforced Concrete Rectangular Beam

Fangping Liu et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2018)

Article Construction & Building Technology

A thermo-mechanical model for SFRC beams or slabs at elevated temperatures

Peter Heek et al.

MATERIALS AND STRUCTURES (2018)

Article Chemistry, Multidisciplinary

Fatigue Behavior of Prestressed Concrete Beam for Straddle-Type Monorail Tracks

Qianhui Pu et al.

APPLIED SCIENCES-BASEL (2018)

Article Construction & Building Technology

Corroded reinforced concrete beams under low-speed and low-cycle fatigue loads

Huang Yuan et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Engineering, Mechanical

Bond life degradation of steel strand and concrete under combined corrosion and fatigue

Fumin Li et al.

ENGINEERING FAILURE ANALYSIS (2017)

Article Mechanics

Damage zone development in heterogeneous asphalt concrete

Berangere Doll et al.

ENGINEERING FRACTURE MECHANICS (2017)

Article Mechanics

Energetical formulation of size effect law for quasi-brittle fracture

Xiaofeng Gao et al.

ENGINEERING FRACTURE MECHANICS (2017)

Article Engineering, Civil

High-cycle fatigue life prediction of reinforced concrete deep beams

Benard Isojeh et al.

ENGINEERING STRUCTURES (2017)

Article Engineering, Civil

Coupled Fatigue-Corrosion Failure Analysis and Performance Assessment of RC Bridge Deck Slabs

Dong-Hui Yang et al.

JOURNAL OF BRIDGE ENGINEERING (2017)

Article Engineering, Mechanical

Mode I fracture toughness of fibre reinforced concrete

Andrea Carpinteri et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)

Article Construction & Building Technology

Research on the flexural performance of RC beams strengthened with TRC under the coupling action of load and marine environment

Yin Shi-ping et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Engineering, Geological

Experimental and Numerical Studies on Development of Fracture Process Zone (FPZ) in Rocks under Cyclic and Static Loadings

M. Ghamgosar et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Article Construction & Building Technology

Fatigue behavior of corroded prestressed concrete beams

Weiping Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Engineering, Mechanical

Fracture Mechanisms of Rock-Concrete Interface: Experimental and Numerical

Wei Dong et al.

JOURNAL OF ENGINEERING MECHANICS (2016)

Article Engineering, Mechanical

Fracture Mechanisms of Rock-Concrete Interface: Experimental and Numerical

Wei Dong et al.

JOURNAL OF ENGINEERING MECHANICS (2016)

Article Construction & Building Technology

Performance deterioration of corroded RC beams and reinforcing bars under repeated loading

Junzu Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Effect of size on the response of cylindrical concrete samples under cyclic loading

S. Sinaie et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Numerical simulation of the structural behaviour of SFRC slabs with or without rebar and prestressing

Lars Goedde et al.

MATERIALS AND STRUCTURES (2015)

Article Construction & Building Technology

Residual strain analysis of non-prestressed reinforcement in PPC beams under fatigue loading

Jigang Han et al.

MATERIALS AND STRUCTURES (2015)

Article Construction & Building Technology

Fracture examination in concrete through combined digital image correlation and acoustic emission techniques

Syed Yasir Alam et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Fracture process zone in notched concrete beam under three-point bending by acoustic emission

Kentaro Ohno et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Engineering, Civil

Fatigue life prediction for aging RC beams considering corrosive environments

Yafei Ma et al.

ENGINEERING STRUCTURES (2014)

Article Engineering, Geological

Scaling of fatigue crack growth in rock

Jia-Liang Le et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)

Article Engineering, Mechanical

Universal Size-Shape Effect Law Based on Comprehensive Concrete Fracture Tests

Christian G. Hoover et al.

JOURNAL OF ENGINEERING MECHANICS (2014)

Article Construction & Building Technology

Analysis of fatigue crack growth in reinforced concrete beams

Sonalisa Ray et al.

MATERIALS AND STRUCTURES (2014)

Article Mechanics

Prediction of size effect and non-linear crack growth in plain concrete under fatigue loading

Nicholas Andres Brake et al.

ENGINEERING FRACTURE MECHANICS (2013)

Article Engineering, Geological

Process zone and size effect in fracture testing of rock

Ali Fakhimi et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)

Article Construction & Building Technology

Fatigue of reinforced concrete beams strengthened with externally post-tensioned CFRP tendons

Ahmed Elrefai et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Engineering, Civil

Monitoring size effect on crack opening in concrete by digital image correlation

S. Y. Alam et al.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2012)

Article Materials Science, Multidisciplinary

Fully-developed FPZ length in quasi-brittle materials

Luis Saucedo et al.

INTERNATIONAL JOURNAL OF FRACTURE (2012)

Article Mechanics

Meso-scale modelling of the size effect on the fracture process zone of concrete

Peter Grassl et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Article Engineering, Multidisciplinary

Fatigue crack growth due to overloads in plain concrete using scaling laws

Sonalisa Ray et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2012)

Article Construction & Building Technology

Design model for the fatigue behaviour of normal strength, high strength and ultra-high strength concrete

Ludger Lohaus et al.

BETON- UND STAHLBETONBAU (2011)

Article Materials Science, Multidisciplinary

Unified nano-mechanics based probabilistic theory of quasibrittle and brittle structures: I. Strength, static crack growth, lifetime and scaling

Jia-Liang Le et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)

Article Construction & Building Technology

Fatigue capacity of plain concrete under fatigue loading with constant confined stress

H. L. Wang et al.

MATERIALS AND STRUCTURES (2011)

Article Materials Science, Multidisciplinary

Fatigue crack propagation model and size effect in concrete using dimensional analysis

Sonalisa Ray et al.

MECHANICS OF MATERIALS (2011)

Article Materials Science, Characterization & Testing

Measurements and Calculations of the Width of the Fracture Process Zones on the Surface of Notched Concrete Beams

L. Skarzynski et al.

STRAIN (2011)

Article Construction & Building Technology

Fracture process zone size and true fracture energy of concrete using acoustic emission

S. Muralidhara et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Mechanics

Fatigue crack propagation model for plain concrete - An analogy with population growth

Sonalisa Ray et al.

ENGINEERING FRACTURE MECHANICS (2010)

Article Materials Science, Multidisciplinary

Calculated phase diagrams and the corrosion of die-cast Mg-Al alloys

Ming Liu et al.

CORROSION SCIENCE (2009)

Article Mechanics

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Z. J. Yang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)

Article Engineering, Mechanical

Universal Size Effect Law and Effect of Crack Depth on Quasi-Brittle Structure Strength

Zdenek P. Bazant et al.

JOURNAL OF ENGINEERING MECHANICS (2009)

Article Multidisciplinary Sciences

Scaling of strength and lifetime probability distributions of quasibrittle structures based on atomistic fracture mechanics

Zdenek P. Bazant et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2009)

Article Materials Science, Multidisciplinary

Statistics of strength of ceramics: finite weakest-link model and necessity of zero threshold

Sze-Dai Pang et al.

INTERNATIONAL JOURNAL OF FRACTURE (2008)

Article Materials Science, Multidisciplinary

Size effect and quasi-brittle fracture: the role of FPZ

Xiaozhi Hu et al.

INTERNATIONAL JOURNAL OF FRACTURE (2008)

Article Materials Science, Multidisciplinary

One, no one, and one hundred thousand crack propagation laws: A generalized Barenblatt and Botvina dimensional analysis approach to fatigue crack growth

Michele Ciavarella et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2008)

Article Mechanics

Self-similarity and crack growth instability in the correlation between the Paris' constants

Alberto Carpinteri et al.

ENGINEERING FRACTURE MECHANICS (2007)

Article Engineering, Mechanical

Asymptotic prediction of energetic-statistical size effect from deterministic finite-element solutions

Zdenek P. Bazant et al.

JOURNAL OF ENGINEERING MECHANICS (2007)

Article Construction & Building Technology

Realistic models for local bond stress-slip of reinforced concrete under repeated loading

Byung Hwan Oh et al.

JOURNAL OF STRUCTURAL ENGINEERING (2007)

Article Dentistry, Oral Surgery & Medicine

Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges

Andre R. Studart et al.

DENTAL MATERIALS (2007)

Article Construction & Building Technology

Quantitative evaluation of fracture processes in concrete using signal-based acoustic emission techniques

CU Grosse et al.

CEMENT & CONCRETE COMPOSITES (2006)

Article Engineering, Geological

Tensile fracture propagation and acoustic emission activity in sandstone: The effect of loading rate

T Backers et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2005)

Article Materials Science, Multidisciplinary

Self-similarity and fractals in the Paris range of fatigue crack growth

A Spagnoli

MECHANICS OF MATERIALS (2005)

Article Construction & Building Technology

Experimental study on AE characteristics of three-point-bending concrete beams

C Bing et al.

CEMENT AND CONCRETE RESEARCH (2004)

Article Engineering, Mechanical

A fractal analysis of size effect on fatigue crack growth

A Carpinteri et al.

INTERNATIONAL JOURNAL OF FATIGUE (2004)

Article Construction & Building Technology

Effect of aggregate on the fracture behavior of high strength concrete

B Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2004)

Article Construction & Building Technology

Influence of fracture process zone height on fracture energy of concrete

XZ Hu et al.

CEMENT AND CONCRETE RESEARCH (2004)

Article Engineering, Civil

Concrete-filled steel circular tubes subjected to constant amplitude cyclic pure bending

M Elchalakani et al.

ENGINEERING STRUCTURES (2004)

Article Construction & Building Technology

Acoustic emission at failure in quasi-brittle materials

JF Labuz et al.

CONSTRUCTION AND BUILDING MATERIALS (2001)

Review Chemistry, Analytical

Basic concepts of artificial neural network (ANN) modeling and its application in pharmaceutical research

S Agatonovic-Kustrin et al.

JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2000)

Article Construction & Building Technology

Effects of passive confinement on fatigue properties of concrete

TT Hooi

MAGAZINE OF CONCRETE RESEARCH (2000)

Article Mechanics

Fracture process zone in concrete tension specimen

K Otsuka et al.

ENGINEERING FRACTURE MECHANICS (2000)