☆ 4.4 Article

Corrosion behaviour of facile coated ZnO on Mg-Zn-Zr alloy in Ringer's physiological solution

SURFACE ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Electrical & Electronic

ZnO Nanoparticles Coprecipitation with Aluminum and Copper Ions for Efficient Photocatalytic Degradation of Commercial Glyphosate

Sucheewan Krobthong et al.

Summary: In this study, ZnO, ZnO:Al, and ZnO:Cu were synthesized and investigated for their potential in degrading commercial glyphosate. The results showed that ZnO:Cu exhibited the highest degradation rate constant, making it the best photocatalytic material for glyphosate degradation.

INTEGRATED FERROELECTRICS (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and Properties of Atmospheric Plasma Sprayed (Al,Cr)2O3-TiO2 Coatings from Blends

Maximilian Grimm et al.

Summary: This study investigated the processability, microstructures, and properties of coatings prepared from chromia-rich (Al,Cr)(2)O-3 solid solution feedstock powders, including blending with different amounts of TiOx powder. The results showed that blending the (Al,Cr)(2)O-3 with 2 wt.% TiOx powder achieved the most balanced coating performance, with high sliding and abrasion wear resistance, as well as high corrosion resistance.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synergistic Effects of Cerium-Based Rare Earth Addition and Hot Deformation on the Microstructure and Mechanical Properties of Mg-0.5Zn-0.5Zr Magnesium Alloy

Hooman Abedi et al.

Summary: The addition of RE can effectively refine the microstructure of the alloy, but high RE content may lead to less effective grain refinement and the appearance of coarse dendritic microstructure. Extrusion results in fragmentation and dispersion of intermetallics, as well as significant grain refinement due to recrystallization processes.

METALS AND MATERIALS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Facile preparation of wear-resistant and anti-corrosion films on magnesium alloy

Limei Ren et al.

Summary: Hydrothermal treatment was used to form magnesium hydroxide and Mg-Al layered double hydroxide films on the surface of AZ31 magnesium alloy. The films showed improved tribological properties and corrosion resistance, especially when prepared in an alkaline solution containing aluminium ions. This study presents a promising and facile method for developing highly wear-resistant and anti-corrosion surfaces for magnesium alloys.

SURFACE ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Preparation of corrosion-resistant hydrophobic composite films on magnesium alloy

Jiyuan Zhu et al.

Summary: This study presents a simple, efficient, and environmentally-friendly method for preparing high-performance corrosion-resistant films on magnesium alloy. The prepared films have a dense bottom layer and a porous upper layer, exhibiting excellent corrosion resistance and stable hydrophobicity.

SURFACE ENGINEERING (2022)

添加到收藏夹

Review Materials Science, Coatings & Films

Surface modification during hydroxyapatite powder mixed electric discharge machining of metallic biomaterials: a review

Himanshu Bisaria et al.

Summary: Surface modifications are crucial for the performance of bio-implants. Powder mixed electric discharge machining (PM-EDM) is an advanced method that can simultaneously machine and coat the surface of conductive materials. Hydroxyapatite, a bio-ceramic with bone-like composition and excellent biocompatibility, can be deposited on implant surfaces using the electro-thermal process of hydroxyapatite powder mixed-EDM (HAp-EDM). This review article meticulously evaluates the surface characteristics of an implant after HAp-EDM, including surface morphology/topography, micro-hardness, phase analysis, recast layer, elemental composition, corrosion/wear resistance, and biocompatibility. The review also explores future research opportunities for HAp-EDM in meeting the high standards of biomedical materials and their applications in bio-implant manufacturing.

SURFACE ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Characterization of a Magnesium Fluoride Conversion Coating on Mg-2Y-1Mn-1Zn Screws for Biomedical Applications

Sofia Gambaro et al.

Summary: This study tested MgF2-coated screws made of a Mg-2Y-1Mn-1Zn alloy as potential biodegradable implants, showing a controlled corrosion rate compared to non-coated screws. The electrochemical tests confirmed the effectiveness of the MgF2 coating in slowing down the corrosion of the magnesium-alloy screws. The results demonstrate the importance of this coating technology for biomedical products.

MATERIALS (2022)

添加到收藏夹

Review Crystallography

Current Research Studies of Mg-Ca-Zn Biodegradable Alloys Used as Orthopedic Implants-Review

Bogdan Istrate et al.

Summary: Biodegradable magnesium-based alloys are considered promising materials for medical applications due to their biocompatibility and excellent mechanical properties. They have been used in the production of implants for small bones and joints, showing high biocompatibility, adequate mechanical properties, and rapid degradation without the need for a second surgery.

CRYSTALS (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Nanoparticle-modified coatings by electrophoretic deposition for corrosion protection of magnesium

Muhammad Akram et al.

Summary: This study reports on nanoparticle-modified biopolymer composite coatings processed using AC-EPD to control the corrosion process of Mg-Al alloys. CeO2 nanoparticle-modified coatings effectively reduce the corrosion current density of Mg-Al materials and hold potential for fine-tuning the degradation of Mg implants.

SURFACE ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Corrosion and mechanical behaviour of biodegradable PLA-cellulose nanocomposite coating on AZ31 magnesium alloy

Narges Rahimi Roshan et al.

Summary: This study found that adding 5% cellulose nanoparticles (CNs) to PLA coatings significantly improved their corrosion resistance, hardness, and mechanical properties. However, further increasing the CNs content decreased the corrosion resistance of the coatings.

SURFACE ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Synthesis and degradation behaviour of Zn-modified coating on Mg alloy

Jun Wang et al.

Summary: This study investigated the use of a biodegradable Zn-modified calcium phosphate coating to improve the biocompatibility of Mg-Zn-Ca alloy via dual-pulse electrodeposition. The results showed that the non-stoichiometric Zn-modified coating is biodegradable, has a protective effect, and enhances cellular response to the implant's surface. Additionally, the introduction of Zn changes the formation mechanism of the coating and increases the apatite formation rate.

SURFACE ENGINEERING (2021)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Research advances in magnesium and magnesium alloys worldwide in 2020

Yan Yang et al.

Summary: Research on magnesium alloys remains a significant focus, with a strong emphasis on microstructure control, mechanical properties, corrosion and protection, and functional magnesium materials. Future research will concentrate on synergistic microstructure control, development of functional materials, corrosion protection measures, and advanced processing technology improvements.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Review Engineering, Biomedical

In vitro and in vivo degradation assessment and preventive measures of biodegradable Mg alloys for biomedical applications

Anuradha Jana et al.

Summary: The review discusses the degradation behavior of biodegradable Mg alloys, focusing on in vitro and in vivo corrosion, as well as preventive measures for biomedical applications. It emphasizes the need for a standard method of corrosion assessment to predict in vivo corrosion rates based on in vitro data.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effect of ZnO nanoparticles addition to PEO coatings on AZ31B Mg alloy: antibacterial effect and corrosion behavior of coatings in Ringer's physiological solution

Mahya Seyfi et al.

Summary: In this study, the PEO technique was utilized to modify the surface of AZ31B Mg alloy, investigating the effects of adding ZnO and HAp nanoparticles on the antibacterial and corrosion behavior of coatings. Results showed that increasing the concentration of ZnO nanoparticles enhanced the antibacterial activity of coatings, reduced corrosion current density, and improved corrosion resistance.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Electrophoretic deposition of hydroxyapatite coating on biodegradable Mg-4Zn-4Sn-0.6Ca-0.5Mn alloy

Ahmad Saadati et al.

SURFACE ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Investigation of microcracks on conversion film of AZ80 Mg alloy

Yingwei Song et al.

SURFACE ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Electrochemical characteristics of iridium coating by double glow plasma discharge process on titanium alloy substrates

Wangping Wu et al.

SURFACE ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Research on Biodegradable Mg-Zn-Gd Alloys for Potential Orthopedic Implants: In Vitro and in Vivo Evaluations

Hongwei Miao et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

添加到收藏夹

Article Engineering, Environmental

Fabrication of ZnO/epoxy resin superhydrophobic coating on AZ31 magnesium alloy

Huimin Zhou et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

Recent Progress on Mg- and Zn-Based Alloys for Biodegradable Vascular Stent Applications

Ying Liu et al.

JOURNAL OF NANOMATERIALS (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

The influence of electrophoretic deposition of HA on Mg-Zn-Zr alloy on its in-vitro degradation behaviour in the Ringer's solution

Qanita Tayyaba et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Structural, optical and charge density analysis of Al doped ZnO Materials

D. Sivaganesh et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Influence of zinc-dipping on electroless nickel coating on magnesium alloy

Xiurong Guan et al.

SURFACE ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile and wear properties of as-cast and as-extruded ZK60 magnesium alloys containing minor Nd additions

Huseyin Zengin et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical Strength, Biodegradation, and in Vitro and in Vivo Biocompatibility of Zn Biomaterials

Donghui Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Selected Properties of ZnO Coating on Mg-Based Alloy for Biomedical Application

A. Kania et al.

ACTA PHYSICA POLONICA A (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Initial Stages of AZ31B Magnesium Alloy Degradation in Ringer's Solution: Interpretation of EIS, Mass Loss, Hydrogen Evolution Data and Scanning Electron Microscopy Observations

Lucien Veleva et al.

METALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coarsening, densification, and grain growth during sintering of nano-sized powders-A perspective

Zhigang Zak Fang et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Synthesis of ZnO Nanopowders by the Homogeneous Precipitation Method: Use of Taguchi's Method for Analyzing the Effect of Different Variables

R. Herrera-Rivera et al.

JOURNAL OF NANOMATERIALS (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Research status of magnesium alloys by micro-arc oxidation: a review

Jinhe Dou et al.

SURFACE ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis of a novel nanostructured zinc oxide/baghdadite coating on Mg alloy for biomedical application: In-vitro degradation behavior and antibacterial activities

H. R. Bakhsheshi-Rad et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of Zn content on cytoactivity and bacteriostasis of micro-arc oxidation coatings on pure titanium

B. H. Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.