☆ 4.7 Article

Preparation and mechanical and biological performance of the Sr-containing microarc oxidation layer on titanium implants

SURFACE & COATINGS TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Preparation of TiNbTaZrMo high-entropy alloy with tunable Young's modulus by selective laser melting

Junyi Feng et al.

Summary: Biological high-entropy alloy (Bio-HEA) is a promising biomedical alloy with excellent mechanical properties and biocompatibility. Selective laser melting (SLM) technique is used to fabricate dense blocks with low Young's modulus and good compression property at room temperature. Triply periodic minimal surface (TPMS) lattice in the HEA structure, with Young's modulus close to that of human trabecular bone, allows for customization of shape and porosity, enabling Bio-HEA to meet various bone implant requirements.

JOURNAL OF MANUFACTURING PROCESSES (2023)

添加到收藏夹

Article Chemistry, Physical

Effect of electroshocking treatment on the microstructure and mechanical properties of laser melting deposited near-β Ti-55531 thin-wall

Yan Wen et al.

Summary: In this study, the near-beta Ti-55531 alloy was manufactured using laser melting deposition (LMD) and followed by electroshocking treatment (EST). The microstructure evolution before and after EST was characterized using scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and X-ray diffraction (XRD). The results showed that EST could reduce the orientation concentration and weaken the texture of the beta phase. XRD results indicated a slight increase in the alpha phase content after EST. The mechanical properties were improved after EST, including an increase in microhardness, yield strength, and tensile strength, which was attributed to the variation of the microstructure. Overall, EST is an effective approach for optimizing the microstructure and improving the mechanical properties of LMD near-beta titanium alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Metastable pitting corrosion behavior and characteristics of passive film of laser powder bed fusion produced Ti-6Al-4V in NaCl solutions with different concentrations

Yu-Wei Cui et al.

Summary: This study investigated the metastable pitting corrosion mechanism of laser powder bed fusion (LPBF) produced Ti-6Al-4V. The passive films of samples were produced by potentiostatic polarization in NaCl solutions with different concentrations, and electrochemical measurements were employed to understand the influence of Cl- on the characteristics of passive films. The frequency of pitting nucleation and the pit dimension increase with increased Cl- concentration. The attack of Cl- promotes the dissolution of passive films, resulting in the formation of pitting corrosion due to the condensation of voids caused by the ingress of Cl-.

CORROSION SCIENCE (2023)

添加到收藏夹

Article Chemistry, Physical

Evolution of grain boundary and texture in TC11 titanium alloy under electroshock treatment

Chang Liu et al.

Summary: This study investigated the evolution mechanism of grain boundaries in TC11 alloy after electroshock treatment. The results showed that abundant alpha martensite phase was precipitated after the treatment. The percentage of high angle misorientation grain boundaries in the beta phase increased, and the misorientation angle preference of the grain boundaries changed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tough and Strong Waterborne Polyurethane Network Combined with Sub-Nanoscaled Calcium Phosphate Oligomers for Protective Coating

Panyi Xi et al.

Summary: The optimal design of organic-inorganic interpenetrating networks in CPO-WPU hybrid coating significantly improves the wear and water resistance of polyurethane protective coatings. The production process is green and cost-effective, making it suitable for applications in paper-making, textiles, and furniture.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and formation mechanism of anodic coatings co-doped with Ga, Si, and P ions on Ti-6Al-4V alloys

Sheng Zhong et al.

Summary: This study incorporated gallium (Ga) ions, known to be effective against bacteria and cancer, into micro-arc oxidation (MAO) coatings on Ti-6Al-4V alloys. The influences of various factors on coating properties were investigated, and it was found that Ga ions entered the coatings through diffusion and electromigration, while other electrolytes acted as film-forming agents.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation of bone-like apatite on plasma electrolytic oxidized Ti-6Al-4V alloy

Byeong-Seok Lim et al.

Summary: This study investigated the precipitation of bone-like apatite on plasma electrolytic oxidation (PEO)-treated Ti6Al-4V alloys with different electrolyte compositions. Various characterization techniques were used to observe the surface morphology, composition, and microstructure of the samples. It was found that the PEO-treated alloy surface in the electrolyte containing Ca, P, Mn, Sr, Zn, Mg, and Si ions was covered with precipitates in a ring pattern around the pores. The Mn ions were detected in the pores and played a role in the formation of MnO2 and Mn2O3. Apatite nucleation occurred in the pores after treatment in a simulated body fluid (SBF) solution, resulting in the formation of larger precipitates.

THIN SOLID FILMS (2022)

添加到收藏夹

Article Engineering, Biomedical

High proportion strontium-doped micro-arc oxidation coatings enhance early osseointegration of titanium in osteoporosis by anti-oxidative stress pathway

Xinkun Shen et al.

Summary: This study investigates the osteoinduction capabilities of a series of strontium-doped titanium implants under normal and osteoporotic conditions. The results indicate that high proportion strontium-doped coatings are more favorable for implant restorations in osteoporosis patients.

BIOACTIVE MATERIALS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of Ti/TiO2(Ca)/hydroxyapatite bioceramic material by micro-arc oxidation and electrochemical deposition

Kunyu Ju et al.

Summary: In this study, a micro-arc oxidation (MAO) process with calcium was introduced to improve the interfacial strength of Titanium with a bioceramic hydroxyapatite (HA) coating. The MAO coating comprised porous TiO2 with Ca or CaTiO3, and the HA coating on the MAO coating was confirmed to be plate-like Ca-deficient HA. The MAO coating containing Ca as a connecting interlayer showed promising results in improving the HA adhesion strength with an adhesive strength of 2.326 MPa.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Electrochemistry

Hydroxyapatite formation of Ca and P modified micro-arc oxidation coating on Ti alloy

Liangwen Liu et al.

Summary: A Simulated Body Fluid (SBF) treatment was performed to modify the surface of a TiO2-based coating containing Ca and P prepared by micro-arc oxidation (MAO). The coating showed good biological activity and corrosion resistance in SBF, and exhibited good compatibility with SBF.

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2022)

添加到收藏夹

Review Chemistry, Applied

Carbon-based bifunctional electrocatalysts for oxygen reduction and oxygen evolution reactions: Optimization strategies and mechanistic analysis

Huidong Xu et al.

Summary: This article reviews different types of bifunctional ORR/OER electrocatalysts with activated surface sites and discusses methods to improve catalytic performance by controlling the microstructure of the catalysts and optimizing their electronic structures. It also analyzes the challenges in structural design and surface engineering of bifunctional ORR/OER catalysts and proposes potential solutions.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Effect of MAO/Ta2O5 composite coating on the corrosion behavior of Mg-Sr alloy and its in vitro biocompatibility

Xiao-Jun Dai et al.

Summary: In this study, a MAO/Ta2O5 composite coating was prepared on the surface of Mg-Sr alloy, which exhibited good corrosion resistance and biocompatibility, providing a coating strategy to improve the performance of Mg-Sr alloy in biological restoration applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Corrosion Resistance and Durability of Superhydrophobic Coating on AZ31 Mg Alloy via One-Step Electrodeposition

Zheng-Zheng Yin et al.

Summary: In this study, a superhydrophobic coating with excellent corrosion resistance was fabricated on AZ31 magnesium alloy through one-step electrodeposition process. The coating exhibited superhydrophobicity, stability, and outstanding adhesion to the substrate. The results showed significantly lower hydrogen evolution rate and corrosion current density compared to the uncoated AZ31 substrate, indicating the excellent corrosion resistance of the coating.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Investigations on the thermal control properties and corrosion resistance of MAO coatings prepared on Mg-5Y-7Gd-1Nd-0.5Zr alloy

Qixing Xia et al.

Summary: This paper used the MAO method to prepare ceramic coatings on Mg-5Y-7Gd-1Nd-0.5Zr substrate and investigated the effects of different reaction time and NH4VO3 concentration on the coatings. The results showed that appropriate reaction time and NH4VO3 concentration could improve the coating performance, while excessive NH4VO3 concentration may lead to the generation of pores and micro-cracks on the coating surface, reducing the corrosion resistance.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Recent progress in superhydrophobic and superamphiphobic coatings for magnesium and its alloys

Viswanathan S. Saji

Summary: This review presents the recent advancements in utilizing superhydrophobic coatings to improve the aqueous corrosion resistance of Mg/Mg alloys. The study discusses the strategies for low surface energy treatments and hierarchical surface micro/nanostructuring, as well as their applications in various areas such as anti-corrosion, biomedical, and anti-icing. The results demonstrate the self-healing characteristics and long-term durability of superhydrophobic surfaces.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electroshock treatment dependent microstructural evolution and mechanical properties of near-β titanium alloy manufactured by directed energy deposition

Haojie Guo et al.

Summary: This study investigated the effects of electroshock treatment (EST) on the microstructural evolution and mechanical properties of near-beta titanium alloy formed by directed energy deposition. Results showed that EST can quickly alter the microstructure and mechanical properties of the material, improving ductility and reducing hardness through changes in the microstructure and lattice distortions.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Influence of altered Ca-P based electrolytes on the anodised titanium bioactivity

J. Alipal et al.

Summary: Anodic oxidation of titanium in a Ca-P base electrolytic solution with different alteration agents resulted in coatings with varying characteristics, such as different morphology and bioactivity. The presence of functional ions like hydronium groups from sulphuric acid led to superior coating performance compared to carboxyl ions from acetic acid, with coatings altered by sulphuric acid showing super hydrophilicity and rough topographies ideal for cell attachment and proliferation in implant applications.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanism of apatite formation on a poorly crystallized calcium phosphate in a simulated body fluid (SBF) at 37 °C

Atef Dridi et al.

Summary: The study focuses on the mechanism of bone-like apatite formation on two poorly crystalline apatite (PCA) samples in simulated body fluid. Experimental and theoretical data revealed a three-stage process of apatite formation, with the immature specimen undergoing a fast precipitation of positively Ca-rich amorphous phase in the prenucleation stage. This research provides insights into the bioactive behavior of biomaterials containing biomimetic PCA phases for tissue engineering.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

TiO2 bioactive implant surfaces doped with specific amount of Sr modulate mineralization

A. Costa et al.

Summary: This study evaluated the effect of varying amounts of Sr in a TiO2 porous layer, with higher Sr content increasing Ca/P ratio and promoting the formation of SrTiO3 compound. Lower Sr concentrations did not affect initial cell adhesion or viability, but rather enhanced mineralization. A Ca-P-TiO2 porous layer with less Sr concentration seems to be an ideal candidate for bone implants.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis, characterization and in vitro evaluation of zinc and strontium binary doped hydroxyapatite for biomedical application

Ihsan Ullah et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Bioinspired surface hierarchical microstructures of Ti6Al4V alloy with a positive effect on osteoconduction

Chen Li et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Characterization and cytocompatibility of hierarchical porous TiO2 coatings incorporated with calcium and strontium by one-step micro-arc oxidation

Yada Li et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Comparative evaluation of Sr-incorporated calcium phosphate and calcium silicate as bioactive osteogenesis coating orthopedics applications

Ruiyan Li et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

添加到收藏夹

Review Infectious Diseases

Antibacterial Property and Biocompatibility of Silver, Copper, and Zinc in Titanium Dioxide Layers Incorporated by One-Step Micro-Arc Oxidation: A Review

Masaya Shimabukuro

ANTIBIOTICS-BASEL (2020)

添加到收藏夹

Article Engineering, Environmental

Donor-acceptor codoping effects on tuned visible light response of TiO2

Mingjie Sun et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Osteogenesis-Related Gene Expression and Guided Bone Regeneration of a Strontium-Doped Calcium-Phosphate-Coated Titanium Mesh

Thuy-Duong Thi Nguyen et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Tuning Superhydrophobic Materials with Negative Surface Energy Domains

Zhongzhen Wu et al.

RESEARCH (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Corrosion resistance and biological properties of a micro-nano structured Ti surface consisting of TiO2 and hydroxyapatite

Jingzu Hao et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Geriatrics & Gerontology

Linking Inter-Individual Variability in Functional Brain Connectivity to Cognitive Ability in Elderly Individuals

Rui Li et al.

FRONTIERS IN AGING NEUROSCIENCE (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of Antibacterial Activity of Titanium-Based Implants' Surfaces Fabricated by Micro-Arc Oxidation

Xiaojing He et al.

COATINGS (2017)

添加到收藏夹

Article Materials Science, Ceramics

In-vitro electrochemical and bioactivity evaluation of SS316L reinforced hydroxyapatite functionally graded materials fabricated for biomedical implants

Muhammad Akmal et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of strontium ions on calcification of preosteoblasts cultured on porous calcium- and phosphate-containing titanium oxide layers formed by micro-arc oxidation

Mizuki Sato et al.

DENTAL MATERIALS JOURNAL (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

A strontium-incorporated nanoporous titanium implant surface for rapid osseointegration

Wenjie Zhang et al.

NANOSCALE (2016)

添加到收藏夹

Article Chemistry, Physical

Microstructure and antibacterial properties of Cu-doped TiO2 coating on titanium by micro-arc oxidation

Xiaohong Yao et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Review Dermatology

Guidelines for the diagnosis and antimicrobial therapy of canine superficial bacterial folliculitis (Antimicrobial Guidelines Working Group of the International Society for Companion Animal Infectious Diseases)

Andrew Hillier et al.

VETERINARY DERMATOLOGY (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

Osteoblast growth on the surface of porous Zn-containing HA/TiO2 hybrid coatings on Ti substrate by MAO plus sol-gel methods

J. Y. Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface analysis and corrosion resistance of a new titanium base alloy in simulated body fluids

C. Vasilescu et al.

CORROSION SCIENCE (2012)

添加到收藏夹

Article Biochemistry & Molecular Biology

Role of zinc in cellular zinc trafficking and mineralization in a murine osteoblast-like cell line

Masashi Nagata et al.

JOURNAL OF NUTRITIONAL BIOCHEMISTRY (2011)

添加到收藏夹

Article Chemistry, Physical

The use of Photoshop software to estimate the adhesion and rust-resistant properties of coating film

Yongchao Zhao et al.

SURFACE AND INTERFACE ANALYSIS (2011)

添加到收藏夹

Article Engineering, Biomedical

The effect of strontium-substituted hydroxyapatite coating on implant fixation in ovariectomized rats

Yunfeng Li et al.

BIOMATERIALS (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.