☆ 4.5 Article

Optimized superconducting MgB2 joint made by IMD technique

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Influence of annealing temperature and isostatic pressure on microstructure and superconducting properties of isotopic Mg11B2 wires fabricated by internal Mg diffusion method

Daniel Gajda et al.

Summary: In this study, superconducting Mg11B2 wires were fabricated using the internal Mg diffusion technique with isotopic amorphous nano boron (11B) as the precursor material. The influence of annealing temperature and isostatic pressure on the diffusion of Mg into the 11B layer and the performance of the wires was investigated. It was found that higher annealing temperatures significantly increased the critical temperature and critical current density of the wires. However, the distribution of Mg in the 11B layer resulted in material heterogeneity. Further studies showed that the combination of annealing temperature and isostatic pressure can improve the performance of the wires.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

MgB2 Superconducting Joint Architecture with the Functionality to Screen External Magnetic Fields for MRI Magnet Applications

Dipak Patel et al.

Summary: A superconducting joint architecture is proposed to screen external magnetic fields in MRI magnet applications. By exploiting the diamagnetic property of superconducting MgB2, a novel joint design successfully achieved magnetic field screening effect, while maintaining a constant critical current.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Physics, Applied

Transport and structural properties of MgB2/Fe wires produced by redesigning internal Mg diffusion process

Hakan Yetis et al.

Summary: We report the transport, electromechanical, and structural properties of single core MgB2/Fe wire produced using a new fabrication method called designed internal Mg diffusion (IMD) process. This method involves the use of non-stoichiometric Mg + B pellets instead of a central Mg rod in the standard IMD method. The results show that the designed IMD method significantly increases the engineering critical current density (J(e)), and the central porous MgB2 structure acts as an internal stabilizer against quench damage at high applied currents.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Superconducting Joining Concept for Internal Magnesium Diffusion-Processed Magnesium Diboride Wires

Dipak Patel et al.

Summary: This study fabricated a superconducting joint using unreacted monofilament internal magnesium diffusion-processed magnesium diboride (MgB2) wires, which demonstrated nearly identical transport current as the bare wire in a strong magnetic field and exhibited very low joint resistance. This work represents the first successful realization of a superconducting joint capable of transferring current without notable degradation under strong magnetic fields, showcasing the great potential of MgB2 for practical applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Superconducting joints using multifilament MgB2 wires for MRI application

Dipak Patel et al.

Summary: The study introduced superconducting joints made with 36 filaments magnesium diboride wires, showing characteristics with a critical temperature of 34.4K and critical current of 38.5A at 10K. Unconventional behavior of the joint was observed at 20K due to field trapping in the MgB2 bulk.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Physics, Applied

Preparation of a small-size superconducting joint for C-doped 30-filament MgB2 wires

Dan Xi et al.

Summary: This paper presents a preparation method for a small-size MgB2 superconducting joint for C-doped 30-filament MgB2 wires. An unreacted in situ C-doped monofilament wire is used as the connecting structure, resulting in a joint with good stability and the ability to release heat quickly. The joint shows a superconducting transition with Tc-on = 33.49 K and negligible resistance below 30.56 K, with approximately 40% J(c) value of the parent 30-filament wire at 4.2 K.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Physics, Applied

Fundamental insight in the design of multifilament MgB2 joint for boosting the persistent-mode operation

Su-Hun Kim et al.

Summary: The research focuses on improving the interconnection between multifilamentary wires in MgB2 magnets through a unique superconducting joint technique, resulting in high critical current and potential application in magnetic resonance imaging systems.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Superconducting materials: Challenges and opportunities for large-scale applications

Chao Yao et al.

Summary: Superconducting materials have the potential to revolutionize electric power and magnetic technologies, with applications in power systems, medical equipment, and advanced technologies. Their performance and cost are critical factors for applications, with key issues including manufacturing and practical challenges of superconductors.

ISCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tailored joint fabrication process derived ultra-low resistance MgB2 superconducting joint

Dipak Patel et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Physics, Condensed Matter

An innovative approach to fabricate MgB2/Fe IMD wires by magnesium powder method

Hakan Yetis et al.

PHYSICA B-CONDENSED MATTER (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

MgB2 Superconducting Joint Technique Based on Mg Diffusion Method

Wenhao Luo et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Tabletop Persistent-Mode, Liquid-Helium-Free, 1.5-T/90-mm MgB2 Finger MRI Magnet for Osteoporosis Screening: Two Design Options

Dongkeun Park et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Superconducting Joints Made With Internal-Magnesium-Diffusion-Processed MgB2 Wires

Akiyoshi Matsumoto et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2018)

添加到收藏夹

Article Instruments & Instrumentation

Investigation of multifilament MgB2 superconducting joint technique for development of MRI magnets

B. H. Yoo et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2018)

添加到收藏夹

Article Instruments & Instrumentation

Note: Progress on the use of MgB2 superconducting joint technique for the development of MgB2 magnets for magnetic resonance imaging (MRI)

Y. G. Kim et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2017)

添加到收藏夹

Article Physics, Applied

Transport properties of multifilament MgB2 long wires and coils prepared by an internal Mg diffusion process

Dongliang Wang et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Proceedings Paper Physics, Applied

Status of MgB2 wire and cable applications in Europe

A. Ballarino et al.

29TH INTERNATIONAL SYMPOSIUM ON SUPERCONDUCTIVITY (2017)

添加到收藏夹

Article Chemistry, Physical

The influence of HIP process on critical parameters of MgB2/Fe wires with big boron grains and without barriers

Daniel Gajda et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Physics, Applied

Uniform transport performance of a 100 m-class multifilament MgB2 wire fabricated by an internal Mg diffusion process

Dongliang Wang et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2016)

添加到收藏夹

Article Physics, Applied

A new approach to a superconducting joining process for carbon-doped MgB2 conductor

Dipak Patel et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Uniformity of Coronene-Added MgB2 Superconducting Wires Fabricated Using an Internal Mg Diffusion Process

ShuJun Ye et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2015)

添加到收藏夹

Article Physics, Applied

MgB2 superconducting joints for persistent current operation

Dipak Patel et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2015)

添加到收藏夹

Review Physics, Applied

Persistent current joints between technological superconductors

G. D. Brittles et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2015)

添加到收藏夹

Article Physics, Applied

Magnetization AC losses in MgB2 wires made by IMD process

J. Kovac et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2015)

添加到收藏夹

Article Thermodynamics

Rational design of MgB2 conductors toward practical applications

Dipak Patel et al.

CRYOGENICS (2014)

添加到收藏夹

Article Chemistry, Physical

Advanced MgB2 wire made by internal magnesium diffusion process

I. Husek et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Monofilament MgB2 Wire for a Whole-Body MRI Magnet: Superconducting Joints and Test Coils

Jiayin Ling et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2013)

添加到收藏夹

Article Physics, Multidisciplinary

Development of High Performance MgB2 Tapes and Wires

Hiroaki Kumakura

JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Superconducting Joint Technique for MgB2 Round Wires

Weijun Yao et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2009)

添加到收藏夹

Article Physics, Applied

Considerations on critical currents and stability of MgB2 wires made by different preparation routes

W Goldacker et al.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.