☆ 4.7 Article

Simultaneous Estimation of Submerged Floating Tunnel Displacement and Mooring Cable Tension through FIR Filter-Based Strain and Acceleration Fusion

STRUCTURAL CONTROL & HEALTH MONITORING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Structural displacement estimation using accelerometer and FMCW millimeter wave radar

Zhanxiong Ma et al.

Summary: This study proposes a technique for estimating structural displacement by fusing measurements from an accelerometer and a millimeter wave radar. The technique includes automated initial calibration and a phase-unwrapping algorithm to improve accuracy. Experimental results demonstrate that the proposed technique has a smaller error compared to laser-based displacement sensors.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Engineering, Civil

Response of a submerged floating tunnel subject to flow-induced vibration

P. X. Zou et al.

Summary: A one-way fluid-structure interaction (FSI) model with multi-scale hydrodynamic solvers and finite element method (FEM) was established to assess the dynamic performance of a submerged floating tunnel (SFT) under flow-induced vibration (FIV) conditions in practical engineering applications. The study focused on analyzing the FIV of SFTs with different cross-section shapes and found that wave conditions dominated the FIV of the SFT tube. It was also observed that extreme events resulted in standing and traveling wave patterns as well as multi-mode response. The adoption of a parametric cross-section effectively reduced the hydrodynamic forcing and structural dynamic response of the SFT.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Real-time structural displacement estimation by fusing asynchronous acceleration and computer vision measurements

Zhanxiong Ma et al.

Summary: In this study, a technique for estimating structural displacement by combining asynchronous acceleration and computer vision measurements using a Kalman filter was developed. The technique was validated through tests on shaking tables, four-story building models, and steel box girder pedestrian bridges, showing accurate displacement estimation with root mean square errors of less than 3 mm.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2022)

添加到收藏夹

Article Engineering, Marine

A numerical approach for coupled analysis of the seismic response of a cable-moored submerged floating tunnel

Mohammad Reza Shekari et al.

Summary: A submerged floating tunnel (SFT) is proposed as an alternative to conventional bridges and tunnels for crossing deep waterways. Limited research has been done to analyze the importance of seaquake effects on SFTs. This paper numerically simulates the dynamic response of an SFT system under bidirectional earthquake actions and confirms the significance of input seismic excitation characteristics.

MARINE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Marine

Feasibility study of submerged floating tunnels with vertical and inclined combined tethers

Kiwon Jeong et al.

Summary: This study investigates the feasibility of submerged floating tunnels (SFTs) with vertical and inclined combined tethers, and uses hydrodynamic analysis to evaluate the system. The numerical analysis shows that the combined mooring system meets design conditions when the tether spacing is less than 40.0 m and inclination angle is 45.0 degrees.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Construction & Building Technology

Structural displacement estimation by fusing vision camera and accelerometer using hybrid computer vision algorithm and adaptive multi-rate Kalman filter

Zhanxiong Ma et al.

Summary: This paper proposes a technique for estimating structural displacement by fusing asynchronous acceleration and vision measurements. By integrating a hybrid computer vision algorithm and an adaptive multirate Kalman filter, high-sampling displacements can be efficiently estimated from low-sampling vision measurements and high-sampling acceleration measurements. Experimental validation shows that the proposed technique accurately estimates high-sampling displacements in real-time with less than 1.5 mm error, indicating its potential for practical applications in long-term continuous structural displacement monitoring.

AUTOMATION IN CONSTRUCTION (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Noncontact cable tension force estimation using an integrated vision and inertial measurement system

Zhanxiong Ma et al.

Summary: A noncontact cable tension force estimation technique was developed using an integrated vision and inertial measurement system (VIS) to improve estimation accuracy by considering the movement of the VIS. The feasibility of this technique was demonstrated through laboratory and field tests, with a discrepancy of less than 1.3% compared to accelerometer estimates.

MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

A cost-effective approach for assessment of pre-stressing force in bridges using piezoelectric transducers

Naveet Kaur et al.

Summary: This study demonstrates that using PZT sensors based on EMI technology can effectively monitor the residual post-tensioning force in PSC bridges, with good agreement compared to measurements from commercial load cells.

MEASUREMENT (2021)

添加到收藏夹

Article Engineering, Marine

Time-domain coupled dynamic simulation for SFT-mooring-train interaction in waves and earthquakes

Chungkuk Jin et al.

Summary: This study investigates the dynamic and hydro-elastic interactions of Submerged Floating Tunnel (SFT)-mooring-train coupled dynamics under wave and earthquake excitations. The SFT and train dynamics are modeled and simulated, with a focus on earthquake-induced responses and the effects of various parameters on the system. Results show that earthquake-induced motions are more significant compared to train-induced motions, with factors such as soil conditions, seismic-wave propagation, and structural damping playing important roles in the dynamic responses. Additionally, the study evaluates the derailment and offload factors and riding-comfort criterion for different train speeds in relation to the tunnel and train designs.

MARINE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Marine

Three-dimensional equivalent static analysis for design of submerged floating tunnel

Gyu-Jin Kim et al.

Summary: This paper introduces a supplementary approach to obtain structural responses of a submerged floating tunnel in the circumferential direction, in addition to traditional longitudinal global time-history analyses. Three-dimensional finite-element analyses were performed by applying static loads equivalent to dynamic loads, with validation supported by comparison of tension forces in mooring lines obtained using different software tools.

MARINE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Marine

Dynamic behavior of the submerged floating tunnel moored by inclined tethers attached to fixed towers

Deokhee Won et al.

Summary: The study aims to investigate the feasibility of SFTs moored by inclined tethers attached to fixed towers, originating from cable-stayed bridges to reduce burden of construction. Hydrodynamic analysis was conducted to study the dynamic characteristics of SFT under various wave conditions.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Mechanics

On rotational flows with discontinuous vorticity beneath steady water waves near stagnation

Lin Chen et al.

Summary: In this study, the authors investigate the flow structure of periodic steady water waves with fixed relative mass flux propagating on rotational flows with piece-wise constant vorticity. Their findings reveal new insights into the characteristics of stagnation points in wave solutions along the global bifurcation diagram, as well as provide in-depth discussions on pressure distributions and particle trajectories beneath large-amplitude steady waves near stagnation. Additionally, the study expands on previous results regarding the amplitude and mass flux of steady water waves travelling on rotational flows with discontinuous vorticity.

JOURNAL OF FLUID MECHANICS (2021)

添加到收藏夹

Article Construction & Building Technology

Bridge displacement estimation by fusing accelerometer and strain gauge measurements

Zhanxiong Ma et al.

Summary: This study proposes a displacement estimation technique by fusing strain and acceleration measurements using a finite impulse response filter. The technique simultaneously estimates displacement and the unknown parameter in strain-displacement transformation, resulting in improved accuracy of displacement estimation compared to previous fusion techniques.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

添加到收藏夹

Article Engineering, Civil

Optimization of tuned mass damper for seismic control of submerged floating tunnel

Chungkuk Jin et al.

Summary: This study optimizes the spring and damping coefficients of a tuned mass damper (TMD) using metaheuristic optimization algorithms to reduce the lateral motions and mooring tensions of a submerged floating tunnel (SFT) under seismic excitations. The optimized TMD effectively attenuates the resonant hydro-elastic transient motions of the SFT at its lowest lateral natural frequency and significantly reduces mooring tensions, especially in large earthquakes.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Ocean

Tunnel-mooring-train coupled dynamic analysis for submerged floating tunnel under wave excitations

Chungkuk Jin et al.

APPLIED OCEAN RESEARCH (2020)

添加到收藏夹

Article Construction & Building Technology

Feasibility Study of Submerged Floating Tunnels Moored by an Inclined Tendon System

Deokhee Won et al.

INTERNATIONAL JOURNAL OF STEEL STRUCTURES (2018)

添加到收藏夹

Article Engineering, Marine

Dynamic response analysis for submerged floating tunnel with anchor-cables subjected to sudden cable breakage

Yiqiang Xiang et al.

MARINE STRUCTURES (2018)

添加到收藏夹

Article Chemistry, Analytical

Calibration of Elasto-Magnetic Sensors on In-Service Cable-Stayed Bridges for Stress Monitoring

Carlo Cappello et al.

SENSORS (2018)

添加到收藏夹

Article Construction & Building Technology

A non-contact vision-based system for multipoint displacement monitoring in a cable-stayed footbridge

Yan Xu et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2018)

添加到收藏夹

Article Engineering, Marine

Dynamic response analysis for submerged floating tunnel due to fluid-vehicle-tunnel interaction

Heng Lin et al.

OCEAN ENGINEERING (2018)

添加到收藏夹

Article Construction & Building Technology

Structural displacement measurements using DC coupled radar with active transponder

Shanyue Guan et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2017)

添加到收藏夹

Article Engineering, Marine

Seismic response of submerged floating tunnel under support excitation

J. Mirzapour et al.

SHIPS AND OFFSHORE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Marine

Spatial dynamic response of submerged floating tunnel under impact load

Yiqiang Xiang et al.

MARINE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Cable tension force estimate using novel noncontact vision-based sensor

Dongming Feng et al.

MEASUREMENT (2017)

添加到收藏夹

Article Materials Science, Characterization & Testing

Automatic measurement and warning of tension force reduction in a PT tendon using eddy current sensing

Ji-Min Kim et al.

NDT & E INTERNATIONAL (2017)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Online implementation of an adaptive calibration technique for displacement measurement using LVDT

K. V. Santhosh et al.

APPLIED SOFT COMPUTING (2017)

添加到收藏夹

Article Engineering, Civil

Reference free method for real time monitoring of bridge deflections

Karim Helmi et al.

ENGINEERING STRUCTURES (2015)

添加到收藏夹

Article Automation & Control Systems

Displacement Estimation Using Multimetric Data Fusion

Jong-Woong Park et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2013)

添加到收藏夹

Article Engineering, Mechanical

Design of the FEM-FIR filter for displacement reconstruction using accelerations and displacements measured at different sampling rates

Yun Hwa Hong et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

添加到收藏夹

Article Engineering, Civil

Field application of elasto-magnetic stress sensors for monitoring of cable tension force in cable-stayed bridges

Jinsuk Yim et al.

SMART STRUCTURES AND SYSTEMS (2013)

添加到收藏夹

Article Engineering, Civil

Estimation of bridge displacement responses using FBG sensors and theoretical mode shapes

Soobong Shin et al.

STRUCTURAL ENGINEERING AND MECHANICS (2013)

添加到收藏夹

Article Engineering, Civil

Measurement of the dynamic displacements and of the modal frequencies of a short-span pedestrian bridge using GPS and an accelerometer

Fanis Moschas et al.

ENGINEERING STRUCTURES (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Design of an FIR filter for the displacement reconstruction using measured acceleration in low-frequency dominant structures

Hae Sung Lee et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)

添加到收藏夹

Article Engineering, Civil

An interferometric radar for non-contact measurement of deflections on civil engineering structures: laboratory and full-scale tests

Carmelo Gentile et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

Mathematical analogy of a beam on elastic supports as a beam on elastic foundation

Motohiro Sato et al.

APPLIED MATHEMATICAL MODELLING (2008)

添加到收藏夹

Article Engineering, Civil

Monitoring dynamic and quasi-static deformations of large flexible engineering structures with GPS: Accuracy, limitations and promises

A. Nickitopoulou et al.

ENGINEERING STRUCTURES (2006)

添加到收藏夹

Article Engineering, Civil

Accurate cable force determination using ambient vibration measurements

R. Geier et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.