☆ 4.2 Article

Experimental deformation analysis of an adhesively bonded multi-material joint for marine applications

STRAIN (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Deformation and damage evolution of a full-scale adhesive joint between a steel bracket and a sandwich panel for naval application

Pankaj R. Jaiswal et al.

Summary: The study investigates the mechanical behavior and failure mechanisms of adhesive joints in naval superstructures through experimental research. Various instrumentation techniques were used to monitor the deformation behavior and damage evolution of a full-scale multi-material joint. The results showed adhesive, cohesive, and skin failure modes, with acceptable correlation found between different sensor signals.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Mechanics

Mode II fracture of an MMA adhesive layer: Theory versus experiment

Sina Askarinejad et al.

Summary: This study aims to develop a mechanics model for adhesive fracture of lap joints under shear loading. Crack initiation and growth in the joints are measured and monitored by Digital Image Correlation. The study assesses the ability of a cohesive zone model to predict various features of specimen failure in cases of high shear ductility adhesive layers.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2021)

添加到收藏夹

Article Mechanics

Effect of surface preparation technique on bond behavior of CFRP-steel double-lap joints: Experimental and numerical studies

Oswaldo Russian et al.

Summary: The experimental program evaluated CFRP-steel double-lap shear (DLS) joints in terms of strength, failure mode, load-displacement behavior, and interfacial shear stress distribution. Grit-blasted specimens with strand sheet CFRP exhibited the highest strength, maximum displacements, and interfacial shear stresses, with mixed interfacial/cohesive failure. Other configurations failed at the adhesive-steel interface.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints

Armin Yousefi Kanani et al.

Summary: A comparative study on different adhesive joint configurations revealed that the scarf joint performed the best. Increasing overlap length was beneficial for certain configurations while the mechanical properties of the adherends significantly affected failure mechanisms.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of adhesive layer properties on the shear strength of single-lap structures of dissimilar materials based on the cohesive zone model

Jiwei Huang et al.

Summary: This paper presents an analysis method for improving the shear strength of single-lap joints of dissimilar materials based on the cohesive zone model (CZM). By establishing a shear-lag model for the single-lap joint and deriving the stress distribution of joints, the study verifies the model through simulation. It constructs a bilinear CZM to simulate the fracture process of joints and comprehensively analyzes the influence of lap length and adhesive layer thickness on the stress distribution of adhesive layers. Through experiments, the research discusses the effects of different properties of adhesive layers on the bonded structure strength.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

The effects of adherend thickness on the fatigue strength of adhesively bonded single-lap joints

Resul Sahin et al.

Summary: Adhesive bonding methods have been widely used in aerospace applications since the 1980s. This study experimentally investigated the lifetimes of single-lap joints of different adherend thicknesses under varying tensile fatigue loads. The static tensile strength of the joints was found to increase with increasing adherend thickness, affecting the maximum load applied to the joints over infinite cycles.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

添加到收藏夹

Article Engineering, Chemical

Thermally induced strain in joints with dissimilar adherends bonded with a flexible adhesive

V Bagiatis et al.

Summary: This study investigated the behavior of assemblies with PMMA bonded to glass under a temperature gradient, using 3D digital image correlation. The analysis of surface strain fields and investigations of joints with different bond line thickness were performed. The results were evaluated and compared with finite-element analysis, showing excellent agreement and indicating the successful application of DIC method in understanding thermally induced strains in adhesively bonded assemblies.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effects of surface treatment and adhesive thickness on the shear strength of precision bonded joints

Lei Guo et al.

Summary: The study found that different surface treatments have an impact on the bond strength of single-lap-joint specimens, with PAA treatment significantly improving the bond strength. Additionally, bond strength is not only determined by surface roughness value or wettability, but also by surface characteristics such as peak density, nano-scale pores, and texture direction.

POLYMER TESTING (2021)

添加到收藏夹

Article Chemistry, Applied

Influence of surface roughness and bondline thickness on the bonding performance of epoxy adhesive joints on mild steel substrates

Dawei Zhang et al.

Summary: This study investigated the influence of surface roughness and bondline thickness on the bonding performance of epoxy adhesive joints, finding that rougher substrates or thinner adhesive bondlines resulted in higher bonding strengths and maximum shear strains. SEM analysis showed that improved bonding on very rough substrates was due to strong mechanical interlocking, while thinner adhesive bondlines offered larger capabilities of plastic deformation.

PROGRESS IN ORGANIC COATINGS (2021)

添加到收藏夹

Article Engineering, Chemical

Stress analysis of double-lap bi-material joints bonded with thick adhesive

Mohamed Nasr Saleh et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

添加到收藏夹

Article Mechanics

Using acoustic emissions (AE) to monitor mode I crack growth in bonded joints

J. Manterola et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints

Pankaj R. Jaiswal et al.

FRATTURA ED INTEGRITA STRUTTURALE (2020)

添加到收藏夹

Article Engineering, Chemical

Monitoring the fatigue crack growth behavior of composite joints using in situ 2D-digital image correlation

T. Thaesler et al.

JOURNAL OF ADHESION (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of adhesive properties on the bond behaviour of externally bonded FRP-to-concrete joints

Jia-Wei Shi et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Research on Applicability of Fiber Bragg Grating Sensor for Ship Structure Monitoring System

Haoyun Tang et al.

4TH INTERNATIONAL CONFERENCE ON DESIGN, MECHANICAL AND MATERIAL ENGINEERING (2019)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Influence of Mechanical surface treatment on the strength of mixed adhesive joint

Nitesh. S. Hirulkar et al.

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recent Progress in Digital Image Correlation: Background and Developments since the 2013 W M Murray Lecture

M. A. Sutton et al.

EXPERIMENTAL MECHANICS (2017)

添加到收藏夹

Article Engineering, Civil

Influence of Adherend Surface Roughness on the Adhesive Bond Strength

A. Ghumatkar et al.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Measuring mode I cohesive law of wood bonded joints based on digital image correlation and fibre Bragg grating sensors

J. Xavier et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Engineering, Chemical

Effect of adhesive characteristics on static strength of adhesive-bonded aluminum alloys

Rui Zheng et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)

添加到收藏夹

Article Engineering, Chemical

The Effect of Adhesive Thickness on the Mechanical Behavior of a Structural Polyurethane Adhesive

M. D. Banea et al.

JOURNAL OF ADHESION (2015)

添加到收藏夹

Article Engineering, Chemical

Determination of the strain distribution in adhesive joints using Fiber Bragg Grating (FBG)

Lucas F. M. da Silva et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Parametric study of the creep failure of double lap adhesively bonded joints

Mohammad Zehsaz et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Instruments & Instrumentation

Dynamic strain distribution measurement and crack detection of an adhesive-bonded single-lap joint under cyclic loading using embedded FBG

Xiaoguang Ning et al.

SMART MATERIALS AND STRUCTURES (2014)

添加到收藏夹

Article Engineering, Chemical

Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: Preliminary studies

R. L. Vijaya Kumar et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)

添加到收藏夹

Article Mechanics

Effect of adhesive thickness, adhesive type and scarf angle on the mechanical properties of scarf adhesive joints

Lijuan Liao et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

添加到收藏夹

Article Engineering, Chemical

Effect of Mechanical Surface Treatment on the Static Strength of Adhesive Lap Joints

A. Spaggiari et al.

JOURNAL OF ADHESION (2013)

添加到收藏夹

Article Engineering, Chemical

Experimental Analysis of the Bondline Stress Concentrations to Characterize the Influence of Adhesive Ductility on the Composite Single Lap Joint Strength

K. B. Katnam et al.

JOURNAL OF ADHESION (2013)

添加到收藏夹

Article Engineering, Chemical

Optimum adhesive thickness in structural adhesives joints using statistical techniques based on Weibull distribution

Jose M. Arenas et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2010)

添加到收藏夹

Article Materials Science, Composites

An experimental study on the effect of overlap length on the failure of composite-to-aluminum single-lap bonded joints

Tae-Hwan Kim et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2008)

添加到收藏夹

Article Engineering, Chemical

Effect of adhesive type and thickness on the lap shear strength

Lucas F. M. da Silva et al.

JOURNAL OF ADHESION (2006)

添加到收藏夹

Article Engineering, Chemical

The effects of overlap length and adherend thickness on the strength of adhesively bonded joints subjected to bending moment

A Ozel et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2004)

添加到收藏夹

Article Mechanics

Test of a redesigned glass-fiber reinforced vinyl ester to steel joint for use between a naval GRP superstructure and a steel hull

J Cao et al.

COMPOSITE STRUCTURES (2003)

添加到收藏夹

Article Mechanics

Characterisation of a glass-fibre reinforced vinylester to steel joint for use between a naval GRP superstructure and a steel hull

SM Clifford et al.

COMPOSITE STRUCTURES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.