☆ 4.6 Article

Electrical and optical parameters optimization and interface engineering for efficiency improvement of double CIGS absorber based solar cell

SOLAR ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Cost-saving and performance-enhancement of CuInGaSe solar cells by adding CuZnSnSe as a second absorber

Naceur Selmane et al.

Summary: This study aims to address the issues of expensive and hazardous indium element in CIGS solar cells, by using thinner CIGS layers and adding a second layer of CZTSe to enhance cell performance. The results show that adding CZTSe to a thin CIGS layer significantly improves conversion efficiency.

SOLAR ENERGY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Numerical simulation of quantum dots as a buffer layer in CIGS solar cells: a comparative study

Zuhair R. Abdulghani et al.

Summary: This study examines the impact of various buffer layers on the performance of CIGS solar cells through numerical modeling and experimental testing. The results suggest that buffer layers with wider bandgap and higher carrier concentration can improve the conversion efficiency and bandgap-CBO window. Furthermore, the optical-electrical characteristics of the buffer layer are critical in determining the progress of CIGS solar cells.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Chemistry, Analytical

Numerical Analysis of a CZTS Solar Cell with MoS2 as a Buffer Layer and Graphene as a Transparent Conducting Oxide Layer for Enhanced Cell Performance

Sampad Ghosh et al.

Summary: The effect of molybdenum disulfide (MoS2) as a buffer layer on the parameters of CZTS-based solar cell devices was explored. The proposed structure of graphene/MoS2/CZTS/Ni exhibited enhanced solar cell performance.

MICROMACHINES (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Performance Analysis of a Cu(In1-xGax)Se2 Solar Cell with Nontoxic WS2 and WSSe Buffer Layers

Alok Kumar Patel et al.

Summary: Significant studies have been conducted to improve the power conversion efficiency of CIGS solar cells by adjusting the energy bandgap and using alternative buffer materials. This paper examines the performance of CIGS solar cells with WS2 and WSSe Janus buffer materials using SCAPS-1D software. The study finds that WSSe Janus layer is a suitable choice for the buffer layer in CIGS solar cells and achieves a maximum efficiency of 25.81%.

JOURNAL OF ELECTRONIC MATERIALS (2022)

添加到收藏夹

Article Physics, Condensed Matter

Performance enhancement of CIGS solar cell with two dimensional MoS2 hole transport layer

Alok Kumar Patel et al.

Summary: This paper presents performance analysis of a solar cell with CIGS material as absorber layer and 2d-MoS2 as hole transport layer. By optimizing the device parameters, a high-efficiency ZnO/CdS/CIGS/MoS2 photovoltaic cell was obtained, providing a new direction for advanced research in this technology. The performance of the cell was analyzed for different parameters to gain a better understanding.

MICRO AND NANOSTRUCTURES (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A numerical study on defect densities of double absorber CH3NH3PbI3/ CIGS solar cell

Ipsita Mohanty et al.

Summary: Numerical simulation of a solar cell with double absorber layers using lead-based perovskite and copper indium gallium selemide as materials. The impact of defect densities of the absorber layers and interface are investigated. The simulated device shows high efficiency and enhanced fill factor, which can be used for research purposes.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Modeling of Photovoltaic Solar Cell Based on CuSbS Absorber for the Enhancement of Performance

Sadanand et al.

Summary: Research on CuSbS2-based ternary compound semiconductor as an absorber layer for photovoltaic cells shows promising potential due to its high absorption coefficient and low cost. Optimization of parameters such as thickness, bandgap, and carrier concentration can improve the overall performance of solar devices.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Device Engineering Approach Toward Stable, Efficient, and Eco-Friendly Perovskite Solar Cell

Saurabh Kumar Pandey et al.

Summary: Through device optimization, a lead-free perovskite solar cell based on MA(3)Sb(2)I(9) achieved an impressive power conversion efficiency of 20.36% by incorporating a tungsten disulfide interlayer. This study highlights the potential of lead-free perovskite solar cells and provides opportunities for designing novel devices for broad photovoltaic applications.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Thin oxide buffer layers for avoiding leaks in CIGS solar cells; a theoretical analysis

Fatemeh Ghamsari-Yazdel et al.

Summary: This research achieved performance improvement of CIGS/CdS/ZnO solar cells by changing the structure of the cells.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

添加到收藏夹

Article Chemistry, Physical

Numerical simulation of a new device architecture for GIGS-based thin-film solar cells using 1D-SCAPS simulator

Rasika N. Mohottige et al.

Summary: This study introduces a low-cost, highly efficient, Cd-free CIGS-based solar cell with ultra-thin CIGS absorber layer and In2S3 buffer layer to achieve high performance. By optimizing the structure through simulation, it was found that the efficiency can reach up to 26% with a 0.3 μm thick CIGS absorber layer.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2021)

添加到收藏夹

Article Energy & Fuels

Influence of back surface field layer on enhancing the efficiency of CIGS solar cell

B. Barman et al.

Summary: The research aims to improve the efficiency of conventional baseline structured CIGS solar cells by adding a PbS layer between the CIGS absorber and the Mo back contact. Simulation results show an increase in conversion efficiency after adding the PbS layer, indicating its potential for enhancing carrier collection efficiency and reducing back surface recombination. Variations and optimization of the PbS layer's thickness, energy band gap, and electron affinity were studied, along with the impact of operating temperature on overall cell performance. These findings suggest promising prospects for future performance and cost-effective solar cells.

SOLAR ENERGY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Numerical Simulation: Design of High-Efficiency Planar p-n Homojunction Perovskite Solar Cells

Brajendra S. Sengar et al.

Summary: Perovskite-based planar homojunction solar cells show higher efficiency and performance advantages, reducing recombination losses through the built-in electric field. Simulation analysis reveals that device performance depends on the thickness and defects of the perovskite layer, with interface defects influencing performance. By designing homojunction devices with perovskite, higher efficiencies have been achieved.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2021)

添加到收藏夹

Article Energy & Fuels

Efficiency boost of CZTS solar cells based on double-absorber architecture: Device modeling and analysis

Tariq AlZoubi et al.

SOLAR ENERGY (2021)

添加到收藏夹

Article Physics, Applied

Simulation analysis of functional MoSe2 layer for ultra-thin Cu(In,Ga)Se2 solar cells architecture

Tariq Alzoubi et al.

MODERN PHYSICS LETTERS B (2020)

添加到收藏夹

Article Energy & Fuels

Effect of relative humidity during the preparation of perovskite solar cells: Performance and stability

Isabel Mesquita et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Physics, Condensed Matter

Enhancement of the efficiency of ultra-thin CIGS/Si structure for solar cell applications

M. Boubakeur et al.

SUPERLATTICES AND MICROSTRUCTURES (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Performance enhancement of CIGS-based solar cells by incorporating an ultrathin BaSi2 BSF layer

Sayed Rezwanul Islam Biplab et al.

JOURNAL OF COMPUTATIONAL ELECTRONICS (2020)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of CIGS thin-film solar cells

Nour El Boukortt et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Performance enhancement of CIGS thin-film solar cells with a functional-window NiO thin layer

Sung-Min Youn et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved power conversion efficiency in n-MoS2/AlN/p-Si (SIS) heterojunction based solar cells

Krishan Kumar et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical simulation and optimization of a silicon clathrate-based solar cell n-Si136/p-Si2 using SCAPS-1D program

Nassim Ahmed Mahammedi et al.

OPTICAL MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Efficiency enhancement of CIGS solar cell by WS2 as window layer through numerical modelling tool

K. Sobayel et al.

SOLAR ENERGY (2020)

添加到收藏夹

Review Energy & Fuels

A review on atomic layer deposited buffer layers for Cu(In,Ga)Se2 (GIGS) thin film solar cells: Past, present, and future

Soumyadeep Sinha et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Impact of Carrier Concentration and Carrier Lifetime on MgZnO/CdSeTe/CdTe Solar Cells

Ramesh Pandey et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2020)

添加到收藏夹

Article Energy & Fuels

Cd-Free Cu(In,Ga)(Se,S)2 Thin-Film Solar Cell With Record Efficiency of 23.35%

Motoshi Nakamura et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2019)

添加到收藏夹

Article Energy & Fuels

Record Efficiency for Thin-Film Polycrystalline Solar Cells Up to 22.9% Achieved by Cs-Treated Cu(In,Ga)(Se,S)(2)

Takuya Kato et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2019)

添加到收藏夹

Article Optics

Effect of MoSe2 on the performance of CIGS solar cells

Hao-yu Sun et al.

OPTOELECTRONICS LETTERS (2019)

添加到收藏夹

Article Physics, Applied

Role of contact work function, back surface field, and conduction band offset in Cu2ZnSnS4 solar cell

Atul Kumar et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Proposed suitable electron reflector layer materials for thin-film CuIn1-xGaxSe2 solar cells

Samaneh Sharbati et al.

OPTICAL MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Analysis of Back-Contact Interface Recombination in Thin-Film Solar Cells

Sanjoy Paul et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Copper indium gallium selenide based solar cells - a review

Jeyakumar Ramanujam et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Chemistry, Physical

New ultra thin CIGS structure solar cells using SCAPS simulation program

H. Heriche et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Physics, Applied

Cu(In,Ga)(Se,S)(2) solar cell research in Solar Frontier: Progress and current status

Takuya Kato

JAPANESE JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of WS2xSe2-2x Alloy Nanosheets with Composition-Tunable Electronic Properties

Xidong Duan et al.

NANO LETTERS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of heavy alkali elementsin Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%

Philip Jackson et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2016)

添加到收藏夹

Letter Chemistry, Physical

An approach for optimizing the shell thickness of core-shell quantum dots using photoinduced charge transfer

R. Vinayakan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.