☆ 4.8 Article

A Universal Room-Temperature 3D Printing Approach Towards porous MOF Based Dendrites Inhibition Hybrid Solid-State Electrolytes

SMALL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Nanostructured zeolitic imidazolate framework-67 reinforced poly (ethylene oxide) composite electrolytes for all solid state Lithium ion batteries

Erqing Zhao et al.

Summary: Composite polymer electrolyte (SCE) shows high ionic conductivity and good interfacial compatibility with lithium for all solid state lithium ion batteries (ASSLIBs); by incorporating ZIF-67 framework material into PEO matrix, the optimized SCE demonstrates excellent performances and stability.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Direct ink writing of 2D material-based supercapacitors

Xiaocong Tian

Summary: This review systematically presents the recent progress in direct ink writing (DIW) of two-dimensional (2D) materials for supercapacitor applications. The basic DIW processes, key scientific/technical points, and corresponding strategies are highlighted, along with discussions on ink fabrication and optimization based on 2D materials.

2D MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Hierarchically Self-Assembled MOF Network Enables Continuous Ion Transport and High Mechanical Strength

Lulu Du et al.

Summary: In this research, a hierarchically self-assembled metal-organic framework (MOF) network was designed to provide continuous ion transport and mechanical support for composite polymer electrolytes, improving the ionic conductivity and mechanical strength. The structure was achieved by constructing well-ordered MOF nanocrystals along 1D polyimide fibers, and sub-nano pores and Lewis acid sites in MOF nanocrystals selectively confined the movement of larger anions.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Super Long-Cycling All-Solid-State Battery with Thin Li6PS5Cl-Based Electrolyte

Sijie Liu et al.

Summary: In this study, a composite electrolyte membrane composed of sulfide Li6PS5Cl and polar poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) framework was successfully prepared, showing high ionic conductivity and good mechanical properties. The composite electrolyte membrane exhibited excellent cycling performance at room temperature. These results demonstrate the potential commercial application value of all-solid-state batteries.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

A flexible, ion-conducting solid electrolyte with vertically bicontinuous transfer channels toward high performance all-solid-state lithium batteries

Chong Liu et al.

Summary: By fabricating PLLF electrolyte with vertically bicontinuous phase structure, efficient Li+ conduction and cycling stability are achieved, providing a promising approach for the development of all-solid-state lithium batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct Ink Writing of Li1.3Al0.3Ti1.7(PO4)3-Based Solid-State Electrolytes with Customized Shapes and Remarkable Electrochemical Behaviors

Zixian Liu et al.

Summary: Researchers have developed various 3D printable LATP-based inks to construct ceramic and hybrid solid-state electrolytes with high conductivities, achieving high ionic conductivity and the ability to design solid-state electrolytes in arbitrary shapes. This DIW strategy provides a new pathway for advanced solid-state energy storage.

SMALL (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

3D-printed solid-state electrolytes for electrochemical energy storage devices

Meng Cheng et al.

Summary: This review article summarizes the 3D-printed solid-state rechargeable batteries and supercapacitors, and discusses various printable polymer composite materials for solid-state electrolytes. The architectures and performances of printed EES devices are analyzed, along with a review of three 3D printing techniques. The development of printable materials and challenges and outlooks for future 3D printing of EES devices are also discussed.

JOURNAL OF MATERIALS RESEARCH (2021)

添加到收藏夹

Review Chemistry, Physical

Design and Manufacture of 3D-Printed Batteries

Zhiyang Lyu et al.

Summary: This article summarizes the latest advances in 3D-printed batteries, focusing on the connection between printable materials and printing techniques as well as rational design considerations. Research shows that 3D printing designs play an important role in battery module architectures, battery configurations, and solving issues that affect battery performance. Future research directions include functional materials, advanced printing technologies, and new device designs.

JOULE (2021)

添加到收藏夹

Review Chemistry, Physical

3D Printing for Solid-State Energy Storage

Xiaocong Tian et al.

Summary: This article discusses the application of 3D printing in solid-state energy storage, focusing on 3D printing principles and key issues in solid-state energy storage, as well as summarizing recent advances in 3D printed solid-state EESDs. The paper highlights the significant role of 3D printing in promoting the future development of solid-state EESDs.

SMALL METHODS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pancake-Like MOF Solid-State Electrolytes with Fast Ion Migration for High-Performance Sodium Battery

Gang Zhang et al.

Summary: A pancake-like morphology solid-like electrolyte with high ionic conductivity was obtained by combining metal-organic framework with liquid electrolyte, showing good compatibility with sodium metal. The study also revealed the ion restriction effect of MOF's apertures size and special functional groups, leading to an increase in ion transference number. The designed solid-like electrolyte in this work is crucial for achieving fast ion migration in high-performance sodium-ion batteries.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Zr-MOF-Enabled Controllable Ion Sieving and Proton Conductivity in Flow Battery Membrane

Li Xin et al.

Summary: The study introduced acid-stable Zr-metal organic frameworks with different pore structures and channel properties as fillers into a non-fluorinated sulfonated poly (ether ether ketone) membrane, resulting in enhanced coulombic efficiency and voltage efficiency in a vanadium redox flow battery system. MOF-801 reduced molecular sieving property, while MOF-808 increased proton conductivity, and the combination of the two showed improved performance in the flow battery system.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

Tao Deng et al.

Summary: The study addresses the challenges faced by CPEs in SSLBs through the design of a LiF-rich SEI, which improves ionic conductivity and oxidation stability while reducing interfacial resistance and allowing for high critical current density. The fabricated SSLBs show exceptional electrochemical performance and long cycling stability, demonstrating the potential for this SEI design approach to be applied to other battery types.

CHEM (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Approaching Practically Accessible Solid-State Batteries: Stability Issues Related to Solid Electrolytes and Interfaces

Rusong Chen et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed High-Loading Lithium-Sulfur Battery Toward Wearable Energy Storage

Chenglong Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Engineering, Chemical

MOF-derived ionic conductor enhancing polymer electrolytes with superior electrochemical performances for all solid lithium metal batteries

Zheng Zhang et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Fireproof, Lightweight, Polymer-Polymer Solid-State Electrolyte for Safe Lithium Batteries

Yi Cui et al.

NANO LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Flexible Ceramic/Polymer Hybrid Solid Electrolyte for Solid-State Lithium Metal Batteries

Kecheng Pan et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Electrochemistry

Metal Organic Framework Nanorod Doped Solid Polymer Electrolyte with Decreased Crystallinity for High-Performance All-Solid-State Lithium Batteries

Zheng Zhang et al.

CHEMELECTROCHEM (2020)

添加到收藏夹

Article Chemistry, Physical

Exploring porous (zeolitic imidazolate frame work-8) ZIF-8 as an efficient filler for high-performance poly(ethyleneoxide)-based solid polymer electrolytes

Zhiwen Lei et al.

NANO RESEARCH (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional-Percolated Ceramic Nanoparticles along Natural-Cellulose-Derived Hierarchical Networks for High Li+ Conductivity and Mechanical Strength

Chao Wang et al.

NANO LETTERS (2020)

添加到收藏夹

Review Chemistry, Physical

A review of challenges and issues concerning interfaces for all-solid-state batteries

Hee-Dae Lim et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biomolecule-Functionalized Solid-State Ion Nanochannels/Nanopores: Features and Techniques

Defang Ding et al.

SMALL (2019)

添加到收藏夹

Article Chemistry, Physical

A MOF-based single-ion Zn2+ solid electrolyte leading to dendrite-free rechargeable Zn batteries

Ziqi Wang et al.

NANO ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes

Fudong Han et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

MOF-derived nanoporous multifunctional fillers enhancing the performances of polymer electrolytes for solid-state lithium batteries

Jian-Fang Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhancing interfacial contact in all solid state batteries with a cathode-supported solid electrolyte membrane framework

Xinzhi Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Anion-immobilized polymer electrolyte achieved by cationic metal-organic framework filler for dendrite-free solid-state batteries

Hanyu Huo et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

High-performance Li6.4La3Zr1.4Ta0.6O12/Poly(ethylene oxide)/Succinonitrile composite electrolyte for solid-state lithium batteries

Wenping Zha et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effective Suppression of Lithium Dendrite Growth Using a Flexible Single-Ion Conducting Polymer Electrolyte

Kuirong Deng et al.

SMALL (2018)

添加到收藏夹

Article Chemistry, Physical

Boosting interfacial Li+ transport with a MOF-based ionic conductor for solid-state batteries

Ziqi Wang et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries

Meng Cheng et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Interfaces in Solid-State Lithium Batteries

Lin Xu et al.

JOULE (2018)

添加到收藏夹

Article Chemistry, Physical

3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability

Aaron J. Blake et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Visible-light reduction CO2 with dodecahedral zeolitic imidazolate framework ZIF-67 as an efficient co-catalyst

Jiani Qin et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries

Kun Fu et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

In situ Cobalt-Cobalt Oxide/N-Doped Carbon Hybrids As Superior Bifunctional Electrocatalysts for Hydrogen and Oxygen Evolution

Haiyan Jin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.