4.7 Article

Solution-reprocessable polymers of intrinsic microporosity as adsorbents for carbon dioxide capture

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Robust fluorescent detection of iodine vapor by a film sensor based on a polymer of intrinsic microporosity

Xinbo Wang et al.

Summary: This study describes a simple and universal method for the rapid and accurate detection of gaseous iodine using a fluorescent film sensor based on luminescent spectroscopy. The material used, PIM-1, has the ability for signal amplification and can be easily processed into desired morphologies. The sensor showed quick response time, high signal-noise ratio, low detection limit, steam tolerability, as well as high reversibility and reusability, making it a practical and efficient tool for iodine detection.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Plasmon-induced broad spectrum photocatalytic overall water splitting: Through non-noble bimetal nanoparticles hybrid with reduced graphene oxide

Chushen Lin et al.

Summary: This study introduces a non-noble plasmonic photocatalyst composed of Cu6Sn5 bimetal nanoparticles and reduced graphene oxide (rGO), which exhibits broad spectrum absorption and excellent performance in photocatalytic water splitting. The proposed design efficiently generates electron-hole pairs through the plasmonic Cu6Sn5 bimetal and further injects them into rGO, resulting in efficient initiation of overall water splitting.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Engineering, Chemical

FeOx nanoclusters decorated TiO2 for boosting white LED driven photocatalytic Fenton-like norfloxacin degradation

Yan Liu et al.

Summary: The treatment of water pollution caused by antibiotic residues is crucial for human health and ecological environment. A FeOx-TNFs heterostructure was synthesized through surface engineering, showing efficient visible light-driven antibiotic degradation.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Troger's Base Network Polymers of Intrinsic Microporosity (TB-PIMs) with Tunable Pore Size for Heterogeneous Catalysis

Ariana R. Antonangelo et al.

Summary: Heterogeneous catalysis combined with porous materials is essential in preparing value-added chemicals. This study presents the synthesis and characterization of tunable pore size microporous polymers and copolymers, which significantly improve the accessibility of catalytic sites and enhance conversions. The catalytic reaction is more efficient than the homogeneous counterpart, and the performance can be further improved by adding solvents to swell the pores.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Article Materials Science, Multidisciplinary

Fast and Quantitative Electrical Detection of Iodine Based on a Polymer of Intrinsic Microporosity

Wanshuang Zhou et al.

Summary: Rapid, sensitive, and high-fidelity detection of toxic radioiodine species is crucial for first responders in nuclear accidents. This study explores the use of a polymer-based sensor for real-time detection of iodine vapor, demonstrating excellent electrical response and selectivity.

ACS APPLIED POLYMER MATERIALS (2022)

Review Polymer Science

Advances in the Application of Polymers of Intrinsic Microporosity in Liquid Separation and Purification: Membrane Separation and Adsorption Separation

Hong Ye et al.

Summary: This paper provides a comprehensive and critical review on the recent research progress of Polymers of Intrinsic Microporosity (PIMs) in the application of liquid separation and purification, highlighting their use in membrane separation and adsorption. The importance of material structure and modification on separation performance is emphasized, and potential new research directions are mentioned. The paper concludes by highlighting the excellent separation efficiency and stable operation characteristics of PIMs in liquid separation and purification, as well as their attractive and broad development prospects.

POLYMER REVIEWS (2021)

Review Chemistry, Multidisciplinary

Advances in Post-Combustion CO2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Ru-Shuai Liu et al.

Summary: With the atmospheric CO2 concentration rapidly increasing to record levels, there is a growing need for advanced CO2 capture technologies. Physical adsorption-based separation technologies offer easy regeneration, high cycle stability, and potentially lower energy penalties and costs. Extensive research has been conducted ranging from novel porous adsorbents to practical separation practices, with a focus on intrinsic properties and industrial relevant variables to enhance CO2 capture.

CHEMSUSCHEM (2021)

Review Environmental Sciences

Activated carbons from biomass-based sources for CO2 capture applications

Nada Abuelnoor et al.

Summary: In an effort to reduce excessive anthropogenic CO2 emissions, various CO2 capture technologies have been developed, with activated carbon being a promising option. Derived from agricultural waste and biomass, activated carbon can be enhanced for CO2 capture through different preparation methods and functionalization, making it suitable for industrial applications like wastewater treatment.

CHEMOSPHERE (2021)

Article Polymer Science

Practical Enantioselective Synthesis of Chiroptical Polymers of Intrinsic Microporosity with Circular Polarized Luminescence

Xinbo Wang et al.

Summary: The newly developed cyclohexyl-fused spirobiindane-based chiral PIM exhibits high intrinsic microporosity, good solubility, and film formability, with macroscopic chirality confirmed by the twist-bend structure. Circular polarized luminescence (CPL) was observed for the first time in PIMs, marking the discovery of the first nonconjugated porous CPL polymer and opening up new research fields for PIM materials.

MACROMOLECULES (2021)

Article Chemistry, Applied

Soluble polymers with intrinsic porosity for efficient removal of phenolic compounds from water

Hao Guo et al.

Summary: PIM-1, a permanently microporous polymer, demonstrates comparable adsorption capacity to state-of-the-art phenolic pollutant adsorbents, with resistance to water and solubility in organic solvents. Additionally, it exhibits pH controlled high selectivity for different phenols and low pollutant residue ability to achieve drinking water safety standards. This work introduces a new approach of using soluble polymers with microporosity as adsorbents.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Article Multidisciplinary Sciences

The underappreciated role of agricultural soil nitrogen oxide emissions in ozone pollution regulation in North China

Xiao Lu et al.

Summary: The study reveals that soil emissions of nitrogen oxides in the North China Plain significantly impact the sensitivity of ozone pollution to anthropogenic emissions, suggesting that additional measures beyond reducing combustion emissions are needed to effectively mitigate ozone pollution.

NATURE COMMUNICATIONS (2021)

Article Polymer Science

Synthesis of thioamide containing polybenzoxazines by the Willgerodt-Kindler reaction

Kamer Bayram et al.

Summary: Benzoxazines with thioamide linkages were successfully prepared through a specific synthetic route, further converted into polybenzoxazines. The curing behavior and thermal stability were studied, revealing that thioamide groups can reduce curing temperatures and possibly generate thiols during heating.

POLYMER CHEMISTRY (2021)

Article Engineering, Environmental

Performance enhancement of CO2 capture adsorbents by UV treatment: The case of self-supported graphene oxide foam

Anish Mathai Varghese et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Chemistry, Multidisciplinary

Utilization of zeolites as CO2 capturing agents: Advances and future perspectives

Santosh Kumar et al.

JOURNAL OF CO2 UTILIZATION (2020)

Review Thermodynamics

Recent advances in elevated-temperature pressure swing adsorption for carbon capture and hydrogen production

Xuancan Zhu et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2019)

Article Engineering, Chemical

Solution-reprocessable microporous polymeric adsorbents for carbon dioxide capture

Zhigang Hu et al.

AICHE JOURNAL (2018)

Article Chemistry, Multidisciplinary

Soluble Polymers with Intrinsic Porosity for Flue Gas Purification and Natural Gas Upgrading

Xinbo Wang et al.

ADVANCED MATERIALS (2017)

Review Chemistry, Multidisciplinary

Carbon Dioxide Capture in Metal-Organic Frameworks

Kenji Sumida et al.

CHEMICAL REVIEWS (2012)

Article Chemistry, Multidisciplinary

Evaluating metal-organic frameworks for post-combustion carbon dioxide capture via temperature swing adsorption

Jarad A. Mason et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Article Chemistry, Physical

Self-Assembled Monolayers Based on Pd-Containing Organometallic Thiols: Preparation and Structural Characterization

Rosa Vitaliano et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2009)

Editorial Material Multidisciplinary Sciences

Amine Scrubbing for CO2 Capture

Gary T. Rochelle

SCIENCE (2009)

Article Chemistry, Physical

A complete experimental approach for synthesis gas separation studies using static gravimetric and column breakthrough experiments

Youssef Belmabkhout et al.

ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY (2007)

Article Chemistry, Multidisciplinary

Solution-processed, organophilic membrane derived from a polymer of intrinsic microporosity

PM Budd et al.

ADVANCED MATERIALS (2004)