4.7 Article

One-step fabrication of TiO2@polyoxometalates@?-Fe2O3 one-dimensional tandem heterojunctions for conductometric acetone sensors

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Analytical

A new strategy to one-step construct polyoxometalate/semiconductor one-dimensional tandem heterojunctions toward optimized conductometric sensing performances of ethanol gas

Jinmei Tian et al.

Summary: In this study, one-dimensional tandem heterojunctions of SnO2 @POMs@WO3 nanofibers were prepared using coaxial electrospinning, and the gas sensing performance was significantly improved compared to SnO2 @WO3 nanofibers. The optimized response to 100 ppm ethanol reached 8.8, providing a new strategy for developing high-performance gas sensors through synthesizing one-dimensional tandem heterojunctions and introducing POMs.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Article Engineering, Environmental

Large modulation of the chemical and electronic sensitization of TiO2/Ag/NiO nanostructure via in situ hydrothermal-induced heterointerface engineering

Chandran Balamurugan et al.

Summary: The use of hydrothermal-induced heterointerface engineering approaches can overcome the limited performance of metal oxide gas sensors caused by poor control of metal oxide nanostructure and their electric/electronic properties, resulting in improved sensitivity and selectivity of the gas sensor.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Mesoporous black TiO2/MoS2/Cu2S hierarchical tandem heterojunctions toward optimized photothermal-photocatalytic fuel production

Zhenzi Li et al.

Summary: Mesoporous black TiO2/MoS2/Cu2S hierarchical tandem heterojunctions are fabricated as photocatalysts with visible-light photocatalytic hydrogen production rate of 3376.7 μmol h-1 g-1, attributed to suitable band gap alignment in the hierarchical tandem heterojunctions.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Inorganic & Nuclear

The modification effect of Fe2O3 nanoparticles on ZnO nanorods improves the adsorption and detection capabilities of TEA

Xiao Liang et al.

Summary: Surface modification with Fe2O3 nanoparticles on ZnO nanorods enhances gas sensing properties significantly, with Fe2O3/ZnO samples showing 3 times higher gas response value to TEA compared to pure ZnO at optimal temperature, along with rapid response/recovery time. DFT simulation confirms the key role of Fe2O3 cluster modification in improving gas sensitivity of the composite sample.

INORGANIC CHEMISTRY FRONTIERS (2022)

Article Chemistry, Physical

Femtosecond laser micro-nano processing for boosting bubble releasing of gas evolution reactions

Shuai Zhang et al.

Summary: The coupling effect of chemical composition and physical structure is crucial for constructing superaerophobic electrodes. By using high precision femtosecond laser technology, hierarchical micro-nano structures with superaerophobic properties were successfully constructed on the surface of silicon substrate, inheriting such special super-wettability to subsequent self-supporting electrodes through chemical synthesis. The introduction of femtosecond laser has opened up new possibilities for synthesizing self-supporting electrodes for gas-involving reactions.

NANO RESEARCH (2022)

Article Chemistry, Analytical

Indium element- induced oxygen vacancies and polycrystalline structure enabled SnO2 nanofibers for highly sensitive detection of NOx

Chengyu Yang et al.

Summary: In-doped SnO2 nanofibers were prepared by electrospinning method and showed high response and selectivity to NOX. The gas-sensing mechanism was investigated and it was found that the polycrystalline structure and In dopant played important roles in the excellent sensing performance.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Materials Science, Multidisciplinary

In-situ growth of large-area monolithic Fe2O3/TiO2 catalysts on flexible Ti mesh for CO oxidation

Xinyue Tang et al.

Summary: This study reports the in-situ fabrication of Fe2O3/TiO2 monolithic catalysts with excellent catalytic performance and stability for CO oxidation, providing new opportunities for the rational design of a variety of monolithic catalysts in industrial applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Simultaneous Visual Detection and Removal of Cu2+ with Electrospun Self-Supporting Flexible Amidated Polyacrylonitrile/Branched Polyethyleneimine Nanofiber Membranes

Hong Shao et al.

Summary: The study reports the design and fabrication of self-supporting nanofiber membranes for visual detection and effective removal of copper ions from water. The membranes exhibit high sensitivity, strong adsorption capacity, excellent selectivity, and certain recovery performance for the removal of copper ions.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Cadmium sulfide quantum dots/dodecahedral polyoxometalates/oxygen-doped mesoporous graphite carbon nitride with Z-scheme and Type-II as tandem heterojunctions for boosting visible-light-driven photocatalytic performance

Yalu Qiu et al.

Summary: The study focuses on the fabrication of tandem heterojunctions between different types of heterojunctions to promote charge separation, resulting in the preparation of CdS QDs/KPW/meso-g-C3N4 ternary heterojunction with excellent photocatalytic performance. Under visible light irradiation, the heterojunction exhibits superior photocatalytic activity due to the effective charge separation and transfer of the special heterojunction structure.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Analytical

Modification of indium oxide nanofibers by polyoxometalate electron acceptor doping for enhancement of gas sensing at room temperature

Jinmei Tian et al.

Summary: The study successfully synthesized POM (PW12)-doped In2O3 composite nanofibers using electrospinning and subsequent calcination. Gas sensing performances of the composite were investigated based on photoconductive change at room temperature for the first time. Results showed that In2O3/PW12 composite nanofibers exhibited higher photoconductivity and enhanced gas sensing response towards formaldehyde compared to pure In2O3 nanofibers.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Polyoxometalate electron acceptor incorporated improved properties of Cu2ZnSnS4-based room temperature NO2 gas sensor

Yuting Wang et al.

Summary: In this study, a CZTS-based gas sensor incorporated with POMs was synthesized using a hydrothermal method. The gas sensing response was significantly improved by incorporating POMs, leading to the highest response of a CZTS-based gas sensor reported so far. The introduction of POMs reduced electron-hole recombination and facilitated electron transfer, showcasing a new avenue for developing high-performance gas sensors based on CZTS.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Multidisciplinary

Ti3C2Tx MXene-Loaded 3D Substrate toward On-Chip Multi-Gas Sensing with Surface-Enhanced Raman Spectroscopy (SERS) Barcode Readout

Kuo Yang et al.

Summary: This study demonstrates a powerful gas sensor with both high sensitivity and multiplex detecting ability by introducing new materials and structural design. The sensor achieved a low detection limit in complex gas samples and solved the repeatability issue of traditional SERS substrates. Furthermore, a visual chromatic barcode based on classic least-square analysis was developed to read the composition of samples.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Solution-Processable Metal-Organic Framework Nanosheets with Variable Functionalities

Hongye Yuan et al.

Summary: This study presents a simple and surfactant-free method for synthesizing highly stable MOF suspensions composed of exceptionally large NUS-8 nanosheets, demonstrating excellent solution processability. The resulting NUS-8 nanosheets can be used to fabricate materials with controllable thickness and good mechanical properties, and capacitive sensors integrated with NUS-8 films functionalized with different terminal groups exhibit distinguishable sensing behaviors toward acetone.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Helical Microporous Nanorods Assembled by Polyoxometalate Clusters for the Photocatalytic Oxidation of Toluene

Biao Yu et al.

Summary: The researchers developed a facile method to synthesize helical microporous nanorods with enhanced catalytic properties, showing promising prospects for future applications in photocatalysis.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Ultrathin MoSe2 nanosheet anchored CdS-ZnO functional paper chip as a highly efficient tandem Z-scheme heterojunction photoanode for scalable photoelectrochemical water splitting

Li Li et al.

Summary: The rational design of photoelectrode architectures is an effective solution for enhancing the efficiency of photoelectrochemical water splitting. In this study, a programmable flexible photoanode with a tandem Z-scheme configuration was developed, showing promising results in terms of light-harvesting and charge carrier transfer. This innovative approach may lead to the construction of high-performance photoelectrochemical water splitting devices.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Multidisciplinary

Polyoxometalate Interlayered Zinc-Metallophthalocyanine Molecular Layer Sandwich as Photocoupled Electrocatalytic CO2 Reduction Catalyst

Haozhou Yang et al.

Summary: A general synthetic method for zinc-metallophthalocyanine (MPc) molecular layer/polyoxometalate (POM) sandwich lamellar material was developed in this study, which improved the performance of CO2 reduction. The incorporation of POM prevented aggregation of MPc molecular layers and favored the exposure of active sites. The molecular layer sandwich catalyst showed superior CO2 reduction activity and achieved high CO Faradaic efficiency under dark and light conditions, with enhanced catalytic performance under external light field.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Chemistry, Analytical

High selectivity of Ag-doped Fe2O3 hollow nanofibers in H2S detection at room operating temperature

Chengyu Yang et al.

Summary: This paper reported a simple method to synthesize Ag-doped Fe2O3 hollow nanofibers by electrospinning, and studied their application as gas sensors. The results showed that the material exhibited high response, selectivity, and sensitivity to H2S at room temperature, making it a promising sensing material for future applications.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

In-situ generated TiO2/α-Fe2O3 heterojunction arrays for batch manufacturing of conductometric acetone gas sensors

Chen Wang et al.

Summary: A highly sensitive and selective acetone gas sensor was successfully fabricated by designing an n-n heterojunction of TiO2 nanorods and alpha-Fe2O3 branches. The sensor based on TiO2/alpha-Fe2O3 heterostructures showed a significantly higher response to acetone gas compared to pristine TiO2 sensors. The enhanced sensing properties were attributed to the specific structure and mechanism of the TiO2/alpha-Fe2O3 n-n heterojunction.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Nanoscience & Nanotechnology

Construction of 1D Heterostructure NiCo@C/ZnO Nanorod with Enhanced Microwave Absorption

Jianwei Wang et al.

Summary: The study designed NiCo-LDHs@ZnO nanorods and derived NiCo@C/ZnO composites through heat treating, achieving excellent electromagnetic wave absorption performance with outstanding dielectric and magnetic losses synergy.

NANO-MICRO LETTERS (2021)

Review Chemistry, Physical

Recent Progress of Nanostructured Sensing Materials from 0D to 3D: Overview of Structure-Property-Application Relationship for Gas Sensors

Tingting Zhou et al.

Summary: With the advancement of nanoscience and nanotechnology, nanomaterials with unique properties have gained more attention in the field of electronic sensors, especially in gas sensing devices. Recent achievements have led to a new wave of research in designing advanced sensing materials with different dimensional structures. The sensitivity and performance of these materials are closely related to their structure, electronic properties, and surface chemistry, influencing various gas sensing applications such as environmental monitoring and flexible wearable electronics.

SMALL METHODS (2021)

Article Chemistry, Physical

Efficient spatial charge separation in unique 2D tandem heterojunction CdxZn1-xIn2S4-CdS-MoS2 rendering highly-promoted visible-light-induced H2 generation

Jiakun Wu et al.

Summary: The unique 2D tandem heterojunction constructed in this study demonstrates efficient electron transfer channels for spatial separation and directional migration of photo-induced charge carriers, along with exceptional light harvesting capacity and abundant active sites, achieving outstanding photocatalytic H-2 evolution activity.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Functional metal-organic frameworks as effective sensors of gases and volatile compounds

Hai-Yang Li et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Nanoscience & Nanotechnology

Polyoxometalate-Incorporated Metallacalixarene@Graphene Composite Electrodes for High-Performance Supercapacitors

Yan Hou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Inorganic & Nuclear

Preparation of core-shell PW12@TiO2 microspheres and oxidative desulfurization performance

Hongcheng Gao et al.

DALTON TRANSACTIONS (2019)

Article Materials Science, Multidisciplinary

Ultrathin ZIF-8 film containing polyoxometalate as an enhancer for selective formaldehyde sensing

Pengyuan Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)