相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Novel interventional electromagnetic thermography for subsurface defect detection
Ling Miao et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)
Review on additive manufacturing and non-destructive testing
Isaac Segovia Ramirez et al.
JOURNAL OF MANUFACTURING SYSTEMS (2023)
A magnetoelectric-ultrasonic multimodal system for synchronous NDE of surface and internal defects in metal
Jianglei Chang et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)
Inspection of RCF rail defects-Review of NDT methods
Milica Micic et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)
Laser ultrasonics and machine learning for automatic defect detection in metallic components
Gaolong Lv et al.
NDT & E INTERNATIONAL (2023)
Dipole modelling of temperature-dependent magnetic flux leakage
Yujue Wang et al.
NDT & E INTERNATIONAL (2023)
Ultra-fast laser ultrasonic imaging method for online inspection of metal additive manufacturing
Yang Chen et al.
OPTICS AND LASERS IN ENGINEERING (2023)
Vibration-based structural damage detection using 1-D convolutional neural network and transfer learning
Shuai Teng et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2023)
Ultrasonic image denoising using machine learning in point contact excitation and detection method
Himanshu Singh et al.
ULTRASONICS (2023)
Satellite Remote Sensing and Non-Destructive Testing Methods for Transport Infrastructure Monitoring: Advances, Challenges and Perspectives
Valerio Gagliardi et al.
REMOTE SENSING (2023)
Long-life in-situ temperature field monitoring using Fiber Bragg grating sensors in electromagnetic launch high-rate hardcase lithium-ion battery
Yiting Wu et al.
JOURNAL OF ENERGY STORAGE (2023)
Real-time structural damage assessment using LSTM networks: regression and classification approaches
Smriti Sharma et al.
NEURAL COMPUTING & APPLICATIONS (2023)
Initial freeze-thaw damage detection in concrete using two-dimensional non-contact ultrasonic sensors
Doyun Kim et al.
CONSTRUCTION AND BUILDING MATERIALS (2023)
A data-driven structural damage identification approach using deep convolutional-attention-recurrent neural architecture under temperature variations
Hamed Fathnejat et al.
ENGINEERING STRUCTURES (2023)
App4SHM-Smartphone Application for Structural Health Monitoring
Eloi Figueiredo et al.
EUROPEAN WORKSHOP ON STRUCTURAL HEALTH MONITORING (EWSHM 2022), VOL 3 (2023)
The Sensitivity Enhancement of Distributed Fiber Optical Sensors
Yingwu Li et al.
EUROPEAN WORKSHOP ON STRUCTURAL HEALTH MONITORING (EWSHM 2022), VOL 1 (2023)
Structural Health Monitoring of Adhesively Bonded Skin-Stiffener Composite Joint Using Distributed Fibre Optic Sensor
Shashank Pant et al.
EUROPEAN WORKSHOP ON STRUCTURAL HEALTH MONITORING (EWSHM 2022), VOL 3 (2023)
An improved generative adversarial network with modified loss function for crack detection in electromagnetic nondestructive testing
Lulu Tian et al.
COMPLEX & INTELLIGENT SYSTEMS (2022)
Advanced sensor technologies and the future of work
John Howard et al.
AMERICAN JOURNAL OF INDUSTRIAL MEDICINE (2022)
Modeling Temperature of Fire-Damaged Reinforced Concrete Buildings Based on Nondestructive Testing and Gene Algorithm Techniques
Paul O. Awoyera et al.
FIRE TECHNOLOGY (2022)
How to characterize a NDT method for weld inspection in battery cell manufacturing using deep learning
Erik Rohkohl et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
A mode shape sensitivity-based method for damage detection of structures with closely-spaced eigenvalues
Sahar Hassani et al.
MEASUREMENT (2022)
Correction method with stress field effects in ultrasound nondestructive testing
Qingdi Ke et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2022)
Design and development of water-immersible two-channel high-voltage spike pulser for under-water inspection and gauging of pipes
N. Pavan Kumar et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2022)
Structural Health Monitoring in Composite Structures: A Comprehensive Review
Sahar Hassani et al.
SENSORS (2022)
Remote characterization of surface slots by enhanced laser-generated ultrasonic Rayleigh waves
Jing Xiao et al.
ULTRASONICS (2022)
Special Issue: Novel Approaches for Nondestructive Testing and Evaluation
Jinyi Lee et al.
APPLIED SCIENCES-BASEL (2022)
Quantitative evaluation of steel corrosion induced deterioration in rubber concrete by integrating ultrasonic testing, machine learning and mesoscale simulation
Jinrui Zhang et al.
CEMENT & CONCRETE COMPOSITES (2022)
Damage detection of composite laminate structures using VMD of FRF contaminated by high percentage of noise
Sahar Hassani et al.
COMPOSITE STRUCTURES (2022)
Defect imaging in carbon fiber composites by acoustic shearography
Lei Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2022)
Methodology of measurement of steel ropes by infrared technology
David Heinz et al.
ENGINEERING FAILURE ANALYSIS (2022)
Influence of number and position of measuring points on the nondestructive testing method to predict the flexural modulus of aged wood
Na Yang et al.
HOLZFORSCHUNG (2022)
Stress-induced giant magneto-impedance effect of amorphous CoFeNiSiPB ribbon with magnetic field annealing
Shangliang Shuai et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2022)
Adiabatic CMOS-Based Electrostatic MEMS Actuation for Reduced Dynamic Power and Switching Activity
P. Muthu et al.
JOURNAL OF NANOMATERIALS (2022)
Robust dynamic phase-shifting common-path shearography using LCPG and pixelated micropolarizer array
Peizhen Yan et al.
OPTICS AND LASERS IN ENGINEERING (2022)
Mechanical properties measurement of materials and devices at micro- and nano-scale by optical methods: A review
Mengxiong Liu et al.
OPTICS AND LASERS IN ENGINEERING (2022)
Sagnac Interferometer Based Digital Shearography for Simultaneous Dual Sensitivity Measurement
Boyang Zhang et al.
OPTICS AND LASERS IN ENGINEERING (2022)
Machine learning and structural health monitoring overview with emerging technology and high-dimensional data source highlights
Arman Malekloo et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)
Flexural damage and failure behavior of 3D printed continuous fiber composites by complementary nondestructive testing technology
Zhi-bo Pan et al.
POLYMER COMPOSITES (2022)
Electromagnetic absorption materials: Current progress and new frontiers
Hualiang Lv et al.
PROGRESS IN MATERIALS SCIENCE (2022)
Simulation and experimental study of remote field current testing for hidden defects of aluminum alloy plate with damping coating
Shichao Jiang et al.
SENSOR REVIEW (2022)
Structural Health Monitoring Cost Estimation of a Piezosensorized Aircraft Fuselage
Ilias N. Giannakeas et al.
SENSORS (2022)
Diffuse Ultrasonic Wave-Based Damage Detection of Railway Tracks Using PZT/FBG Hybrid Sensing System
Xiangtao Sun et al.
SENSORS (2022)
An improved ultrasonic computerized tomography (UCT) technique for damage localization based on compressive sampling (CS) theory
Wentao Wang et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2022)
Three decades of statistical pattern recognition paradigm for SHM of bridges
Eloi Figueiredo et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)
Automatic defect detection for ultrasonic wave propagation imaging method using spatio-temporal convolution neural networks
Jiaxing Ye et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)
CNN-LSTM network-based damage detection approach for copper pipeline using laser ultrasonic scanning
Liuwei Huang et al.
ULTRASONICS (2022)
Predicting Mechanical Properties of Cold-Rolled Steel Strips Using Micro-Magnetic NDT Technologies
Hongwei Sheng et al.
MATERIALS (2022)
Electrical Resistivity Measurements for Nondestructive Evaluation of Chloride-Induced Deterioration of Reinforced Concrete-A Review
Kevin Paolo V. Robles et al.
MATERIALS (2022)
Assessment and detection of stress corrosion cracking by advanced eddy current array nondestructive testing and material characterization
Hossein Taheri et al.
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2022)
Signal-Level Fusion Approach for Embedded Ultrasonic Sensors in Damage Detection of Real RC Structures
Joyraj Chakraborty et al.
MATHEMATICS (2022)
A pilot project for the long-term structural health monitoring of historic city gates
Giacomo Zini et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2022)
A hierarchical deep convolutional regression framework with sensor network fail-safe adaptation for acoustic-emission-based structural health monitoring
Shifeng Guo et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)
Non-Contact Vibro-Acoustic Object Recognition Using Laser Doppler Vibrometry and Convolutional Neural Networks
Abdel Darwish et al.
SENSORS (2022)
Experiments and modelling of ultrasonic waves in composite plates under varying temperature
Donato Perfetto et al.
ULTRASONICS (2022)
Intermetallic compounds of the Cr-Mn system investigated using in situ powder neutron diffraction: The reported order-disorder transformation of the ? phase elucidated
Jean -Marc Joubert
INTERMETALLICS (2022)
Electrochemical Reduction of Cr (VI) Using a Graphene-Modified Stainless Steel Electrode
Long Chen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2022)
Automatic defect identification in magnetic particle testing using a digital model aided De-noising method
Yanting Chen et al.
MEASUREMENT (2022)
Structural damage detection based on convolutional neural networks and population of bridges
Shuai Teng et al.
MEASUREMENT (2022)
Low-Cost Wireless Structural Health Monitoring of Bridges
Seyedmilad Komarizadehasl et al.
SENSORS (2022)
Magnetoencephalography with optically pumped magnetometers (OPM-MEG): the next generation of functional neuroimaging
Matthew J. Brookes et al.
TRENDS IN NEUROSCIENCES (2022)
Deep learning-based anomaly detection from ultrasonic images
Luka Posilovic et al.
ULTRASONICS (2022)
NDT Method for Line Laser Welding Based on Deep Learning and One-Dimensional Time-Series Data
Yang Liu et al.
APPLIED SCIENCES-BASEL (2022)
Phased array ultrasonic inspection and automated identification of wrinkles in laminated composites
Haiyan Zhang et al.
COMPOSITE STRUCTURES (2022)
FEM-assisted shearography with spatially modulated heating for non-destructive testing of thick composites with deep defects
Nan Tao et al.
COMPOSITE STRUCTURES (2022)
Aircraft visual inspection: A systematic literature review
Yuri D. V. Yasuda et al.
COMPUTERS IN INDUSTRY (2022)
A Hilbert transform sensitivity-based model-updating method for damage detection of structures with closely-spaced eigenvalues
Sahar Hassani et al.
ENGINEERING STRUCTURES (2022)
Real-Time Inspection in Detection Magnetic Flux Leakage by Deep Learning Integrated with Concentrating Non-Destructive Principle and Electromagnetic Induction
Nallamilli P. G. Bhavani et al.
IEEE INSTRUMENTATION & MEASUREMENT MAGAZINE (2022)
Unbalanced, cracked, and misaligned rotating machines: a comparison between classification procedures throughout the steady-state operation
Nima Rezazadeh et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)
Deep learning in automated ultrasonic NDE - Developments, axioms and opportunities
Sergio Cantero-Chinchilla et al.
NDT & E INTERNATIONAL (2022)
Split Ring Resonator Network and Diffused Sensing Element Embedded in a Concrete Beam for Structural Health Monitoring
Erika Pittella et al.
SENSORS (2022)
Energy-aware versatile wireless sensor network configuration for structural health monitoring
Xiao-Han Hao et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2022)
Development and Implementation of Cement-Based Nanocomposite Sensors for Structural Health Monitoring Applications: Laboratory Investigations and Way Forward
A. K. Roopa et al.
SUSTAINABILITY (2022)
A modelling technique to investigate the effects of quasi-static loads on guided-wave based structural health monitoring systems
Donato Perfetto et al.
FORCES IN MECHANICS (2022)
Time and Frequency Domain Assessment of Low-Power MEMS Accelerometers for Structural Health Monitoring
Emanuele Parisi et al.
PROCEEDINGS OF 2022 IEEE INTERNATIONAL WORKSHOP ON METROLOGY FOR INDUSTRY 4.0 & IOT (IEEE METROIND4.0&IOT) (2022)
Artificial Intelligence and Structural Health Monitoring of Bridges: A Review of the State-of-the-Art
Raffaele Zinno et al.
IEEE ACCESS (2022)
Application of Nondestructive Testing Technology in Quality Evaluation of Plain Concrete and RC Structures in Bridge Engineering: A Review
Yuanxun Zheng et al.
BUILDINGS (2022)
Analysis of Sensitivity of Distance between Embedded Ultrasonic Sensors and Signal Processing on Damage Detectability in Concrete Structures
Joyraj Chakraborty et al.
ACOUSTICS (2022)
Designing a Structural Health Monitoring System Accounting for Temperature Compensation
Valeria Francesca Caspani et al.
INFRASTRUCTURES (2022)
Sensitive quantum tiltmeter with nanoradian resolution
Jie Liu et al.
PHYSICAL REVIEW A (2022)
Wireless Sensor Networks for Continuous Structural Health Monitoring of Historic Masonry Towers
Paolo Barsocchi et al.
INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2021)
Weld defect classification in radiographic images using unified deep neural network with multi-level features
Lu Yang et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2021)
Machine Learning Algorithms in Civil Structural Health Monitoring: A Systematic Review
Majdi Flah et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)
High transfer coefficient niobium nano-SQUID integrated with a nanogap modulation flux line
Zhong Qing et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2021)
A systematic review of convolutional neural network-based structural condition assessment techniques
Sandeep Sony et al.
ENGINEERING STRUCTURES (2021)
A novel electromagnetic nondestructive testing method for carbon fiber reinforced polymer laminates based on power loss
Wu Dehui et al.
COMPOSITE STRUCTURES (2021)
Development of a CNN edge detection model of noised X-ray images for enhanced performance of non-destructive testing
Zimu Xiao et al.
MEASUREMENT (2021)
A metrological approach to the time of flight diffraction method (ToFD)
R. C. Mayworm et al.
MEASUREMENT (2021)
Experimental comparison of acoustic emission sensors in the detection of outer race defect of angular contact ball bearings by artificial neural network
A. Meserkhani et al.
MEASUREMENT (2021)
Optimal design of remote field eddy current testing probe for ferromagnetic pipeline inspection
Saibo She et al.
MEASUREMENT (2021)
An ultrasonic visualization system using a fiber-optic Bragg grating sensor and its application to damage detection at a temperature of 1000 °C
Fengming Yu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
Sensors for Structural Health Monitoring of Agricultural Structures
Chrysanthos Maraveas et al.
SENSORS (2021)
FBG-Based Sensing for Structural Health Monitoring of Road Infrastructure
Janis Braunfelds et al.
JOURNAL OF SENSORS (2021)
The post-installed screw pull-out test: Development of a method for assessing in-situ concrete compressive strength
Salam Al-Sabah et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Near-Infrared-Responsive Photocatalysts
Yi Yang et al.
SMALL METHODS (2021)
Defect Detection Capabilities of Pulse Compression Based Infrared Non-Destructive Testing and Evaluation
Geetika Dua et al.
IEEE SENSORS JOURNAL (2021)
Investigation of DC Electromagnetic-Based Motion Induced Eddy Current on NDT for Crack Detection
Fei Yuan et al.
IEEE SENSORS JOURNAL (2021)
Novel non-destructive technique for detecting the weld fusion zone using a filler wire of high x-ray contrast
J. Galos et al.
NDT & E INTERNATIONAL (2021)
Design and analysis of fiber Bragg grating sensor to monitor strain and temperature for structural health monitoring
Ishant Dhingra et al.
OPTICAL AND QUANTUM ELECTRONICS (2021)
Application of embedded fibre Bragg grating sensors for structural health monitoring of complex composite structures for marine applications
Magdalena Mieloszyk et al.
MARINE STRUCTURES (2021)
Damage Detection in Flat Panels by Guided Waves Based Artificial Neural Network Trained through Finite Element Method
Donato Perfetto et al.
MATERIALS (2021)
Non-Destructive Testing Applications for Steel Bridges
Seyed Saman Khedmatgozar Dolati et al.
APPLIED SCIENCES-BASEL (2021)
Machine Learning for Anomaly Assessment in Sensor Networks for NDT in Aerospace
Ivan Kraljevski et al.
IEEE SENSORS JOURNAL (2021)
Non-Destructive Evaluation of Coating Thickness Using Water Immersion Ultrasonic Testing
Jiannan Zhang et al.
COATINGS (2021)
Research on non-destructive testing technology of hydraulic engineering based on improved ALO algorithm and wireless network
Chenghua Fu et al.
ALEXANDRIA ENGINEERING JOURNAL (2021)
High Dynamic Range 6-Axis Force Sensor Employing a Semiconductor-Metallic Foil Strain Gauge Combination
Ryuya Tamura et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2021)
Wireless passive surface acoustic wave (SAW) technology in gas sensing
Yong Pan et al.
SENSOR REVIEW (2021)
A Review of Sensing Technologies for Non-Destructive Evaluation of Structural Composite Materials
Ranjeetkumar Gupta et al.
JOURNAL OF COMPOSITES SCIENCE (2021)
Damage detection of CFRP composites by electromagnetic wave nondestructive testing (EMW-NDT)
Qing-Qing Ni et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Balanced semisupervised generative adversarial network for damage assessment from low-data imbalanced-class regime
Yuqing Gao et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2021)
Sensors for process and structural health monitoring of aerospace composites: A review
Helena Rocha et al.
ENGINEERING STRUCTURES (2021)
Structural Health Monitoring System With Narrowband IoT and MEMS Sensors
Flavio Di Nuzzo et al.
IEEE SENSORS JOURNAL (2021)
Piezoelectric MEMS Resonators: A Review
Gayathri Pillai et al.
IEEE SENSORS JOURNAL (2021)
Automated Flaw Detection in Multi-channel Phased Array Ultrasonic Data Using Machine Learning
Oskar Siljama et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2021)
3D torsional experimental strain modal analysis for structural health monitoring using piezoelectric sensors
Dattar Singh Aulakh et al.
MEASUREMENT (2021)
Rapid detection of cracks in the rail foot by ultrasonic B-scan imaging using a shear horizontal guided wave electromagnetic acoustic transducer
Songtao Hu et al.
NDT & E INTERNATIONAL (2021)
A Novel Framework for Integration of Abstracted Inspection Data and Structural Health Monitoring for Damage Prognosis of Miter Gates
Manuel A. Vega et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)
Pipeline In-Line Inspection Method, Instrumentation and Data Management
Qiuping Ma et al.
SENSORS (2021)
Artificial intelligence in real-time diagnostics and prognostics of composite materials and its uncertainties-a review
Muthu Ram Prabhu Elenchezhian et al.
SMART MATERIALS AND STRUCTURES (2021)
Simulation and performance study of circular ultrasonic array for tubes' internal inspection
Ze Xi et al.
ULTRASONICS (2021)
Combined two-level damage identification strategy using ultrasonic guided waves and physical knowledge assisted machine learning
Mahindra Rautela et al.
ULTRASONICS (2021)
Reverse-Time Migration Imaging of Ground-Penetrating Radar in NDT of Reinforced Concrete Structures
Ruiqing Shen et al.
REMOTE SENSING (2021)
Recent Advancements in Battery Management System for Li-Ion Batteries of Electric Vehicles: Future Role of Digital Twin, Cyber-Physical Systems, Battery Swapping Technology, and Nondestructive Testing
Nitika G. Panwar et al.
ENERGY TECHNOLOGY (2021)
Magnetic Particle Inspection Optimization Solution within the Frame of NDT 4.0
Andreea Ioana Sacarea et al.
PROCESSES (2021)
Recommendation System for Signal Processing in SHM
Jakub Gorski et al.
ARTIFICIAL INTELLIGENCE AND SOFT COMPUTING (ICAISC 2021), PT I (2021)
Sensor Networks for Structures Health Monitoring: Placement, Implementations, and Challenges-A Review
Samir Mustapha et al.
VIBRATION (2021)
Nonlinearity in the propagation of acoustic waves: Simulation and experimental validation in a creep damaged material
Minati Kumari Sahu et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Zeonex based decagonal photonic crystal fiber (D-PCF) in the terahertz (THz) band for chemical sensing applications
Shuvo Sen et al.
SENSING AND BIO-SENSING RESEARCH (2021)
Damage Detection in Multiple RC Structures Based on Embedded Ultrasonic Sensors and Wavelet Transform
Joyraj Chakraborty et al.
BUILDINGS (2021)
Failure Analysis of Heat Exchanger Using Internal Rotary Inspection System (IRIS)
Mohamed Fayas Saffiudeen et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2021)
Real-time structural health monitoring for concrete beams: a cost-effective 'Industry 4.0' solution using piezo sensors
Arka Ghosh et al.
INTERNATIONAL JOURNAL OF BUILDING PATHOLOGY AND ADAPTATION (2021)
Considering temperature effect on robust principal component analysis orthogonal distance as a damage detector
Luis Eduardo Mujica et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2020)
Using Ground Penetrating Radar Methods to Investigate Reinforced Concrete Structures
Fabio Tosti et al.
SURVEYS IN GEOPHYSICS (2020)
Successes and challenges in non-destructive testing of aircraft composite structures
Hossein Towsyfyan et al.
CHINESE JOURNAL OF AERONAUTICS (2020)
Monitoring of misalignment in low speed geared shafts with acoustic emission sensors
Enrique Caso et al.
APPLIED ACOUSTICS (2020)
Deep learning for data anomaly detection and data compression of a long-span suspension bridge
FuTao Ni et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2020)
Pavement-distress detection using ground-penetrating radar and network in networks
Zheng Tong et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Application of image processing to radiographic image for quantitative assessment of friction stir welding quality of aluminium 2024 alloy
S. Sudhagar et al.
MEASUREMENT (2020)
Progress and trends in fault diagnosis for renewable and sustainable energy system based on infrared thermography: A review
Bolun Du et al.
INFRARED PHYSICS & TECHNOLOGY (2020)
Experimental Investigation and Error Analysis of High Precision FBG Displacement Sensor for Structural Health Monitoring
Chuang Li et al.
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2020)
Sensor faults classification for SHM systems using deep learning-based method with Tsfresh features
Gang Liu et al.
SMART MATERIALS AND STRUCTURES (2020)
Health Monitoring of Civil Infrastructures by Subspace System Identification Method: An Overview
Hoofar Shokravi et al.
APPLIED SCIENCES-BASEL (2020)
Applications of ultrasonic testing and machine learning methods to predict the static & fatigue behavior of spot-welded joints
N. Amiri et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Steering Hollow Multishelled Structures in Photocatalysis: Optimizing Surface and Mass Transport
Yanze Wei et al.
ADVANCED MATERIALS (2020)
Damage characterization of laminated composites using acoustic emission: A review
Milad Saeedifar et al.
COMPOSITES PART B-ENGINEERING (2020)
Determination of Natural Frequencies of Pipes Using White Noise for Magnetostrictive Longitudinal Guided-Wave Nondestructive Testing
Donglai Zhang et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)
LineSpyX: A Power Line Inspection Robot Based on Digital Radiography
Yuan Gao et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2020)
Structural Health Monitoring with Distributed Optical Fiber Sensors of tunnel lining affected by nearby construction activity
Judit Gomez et al.
AUTOMATION IN CONSTRUCTION (2020)
Advances of deep learning applications in ground-penetrating radar: A survey
Zheng Tong et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
A review of non-destructive testing on wind turbines blades
Fausto Pedro Garcia Marquez et al.
RENEWABLE ENERGY (2020)
Colloquium: Linear in temperature resistivity and associated mysteries including high temperature superconductivity
Chandra M. Varma
REVIEWS OF MODERN PHYSICS (2020)
Development and Application of Infrared Thermography Non-Destructive Testing Techniques
Zhi Qu et al.
SENSORS (2020)
Comparison of Cooled and Uncooled IR Sensors by Means of Signal-to-Noise Ratio for NDT Diagnostics of Aerospace Grade Composites
Shakeb Deane et al.
SENSORS (2020)
Physic perspective fusion of electromagnetic acoustic transducer and pulsed eddy current testing in non-destructive testing system
Wei Guo et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2020)
Active IR Thermography Evaluation of Coating Thickness by Determining Apparent Thermal Effusivity
Alexey Moskovchenko et al.
MATERIALS (2020)
Air-Coupled, Contact, and Immersion Ultrasonic Non-Destructive Testing: Comparison for Bonding Quality Evaluation
Bengisu Yilmaz et al.
APPLIED SCIENCES-BASEL (2020)
Spatial-light-modulator-based dual shearing direction shearography
Boyang Zhang et al.
APPLIED OPTICS (2020)
A scoping review of non-destructive testing (NDT) techniques in building performance diagnostic inspections
Yasser El Masri et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Real-time imaging of microcracks on metallic surface using total focusing method and plane wave imaging with Rayleigh waves
Mathieu Ducousso et al.
NDT & E INTERNATIONAL (2020)
Phased array ultrasonic imaging using angle beam virtual source full matrix capture-total focusing method
Sumana et al.
NDT & E INTERNATIONAL (2020)
Measurement of coating thickness using lift-off point of intersection features from pulsed eddy current signals
Yao Wang et al.
NDT & E INTERNATIONAL (2020)
Methodology for ultrasonic inspection of dispersion type U-Mo fuel plates
Maria J. Alarcon et al.
PROGRESS IN NUCLEAR ENERGY (2020)
A cylindrical ring dielectric resonator based passive wireless sensor for position insensitive crack monitoring
Jun Zhang et al.
SENSORS AND ACTUATORS A-PHYSICAL (2020)
A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control
F. Honarvar et al.
ULTRASONICS (2020)
Nondestructive Testing for Wheat Quality with Sensor Technology Based on Big Data
Yan-Ge Tian et al.
JOURNAL OF ANALYTICAL METHODS IN CHEMISTRY (2020)
A flat jacks method for in situ testing of brick masonry shear characteristics
Alessandro Armanasco et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Dynamic Fluid Ingress Detection in Geomaterials Using K-Band Frequency Modulated Continuous Wave Radar
Jamie Blanche et al.
IEEE ACCESS (2020)
Review-Deep Learning Methods for Sensor Based Predictive Maintenance and Future Perspectives for Electrochemical Sensors
Srikanth Namuduri et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
A mobile nondestructive testing (NDT) system for fast detection of impact damage in fiber-reinforced plastics (FRP)
Johannes Rittmann et al.
JOURNAL OF SENSORS AND SENSOR SYSTEMS (2020)
Robust structural health monitoring under environmental and operational uncertainty with switching state-space autoregressive models
Anthony Liu et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)
A practical omni-directional SH wave transducer for structural health monitoring based on two thickness-poled piezoelectric half-rings
Qiang Huan et al.
ULTRASONICS (2019)
An LC Wireless Microfluidic Sensor Based on Low Temperature Co-Fired Ceramic (LTCC) Technology
Yongyuan Liang et al.
SENSORS (2019)
Cavitas electrochemical sensor toward detection of N-epsilon (carboxymethyl)lysine in oral cavity
Bianca Ciui et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Non-destructive testing of light armours of CFRP after ballistic impacts by IR thermography methods
Waldemar Swiderski
COMPOSITE STRUCTURES (2019)
Development of Acoustic Emission Sensor Optimized for Partial Discharge Monitoring in Power Transformers
Wojciech Sikorski
SENSORS (2019)
Quantitative Attribute Analyses with Ground Penetrating Radar for Infrastructure Assessments and Structural Health Monitoring
Isabel Morris et al.
SENSORS (2019)
Nondestructive Ultrasonic Inspection of Composite Materials: A Comparative Advantage of Phased Array Ultrasonic
Hossein Taheri et al.
APPLIED SCIENCES-BASEL (2019)
Planar Eddy Current Sensor Array With Null-Offset
Lihui Liu et al.
IEEE SENSORS JOURNAL (2019)
Novel Hybrid Method Based on Advanced Signal Processing and Soft Computing Techniques for Condition Assessment of Timber Utility Poles
Yang Yu et al.
JOURNAL OF AEROSPACE ENGINEERING (2019)
Comparative analysis of signal processing techniques for impedance-based SHM applications in noisy environments
Bruno Albuquerque de Castro et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Application of Digital Image Correlation (DIC) Method for Road Material Testing
Jaroslaw Gorszczyk et al.
MATERIALS (2019)
Sub-surface simulated damage detection using Non-Destructive Testing Techniques in reinforced-concrete slabs
Harsh Rathod et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Low-Loss Random Fiber Gratings Made With an fs-IR Laser for Distributed Fiber Sensing
Ping Lu et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2019)
Optimizing input data for training an artificial neural network used for evaluating defect depth in infrared thermographic nondestructive testing
A. O. Chulkov et al.
INFRARED PHYSICS & TECHNOLOGY (2019)
Pixelated Carrier Phase-Shifting Shearography Using Spatiotemporal Low-Pass Filtering Algorithm
Peizheng Yan et al.
SENSORS (2019)
Improved Performance of Fundamental Mode Orthogonal Fluxgate Using a Micro-Patterned Meander-Shaped Ribbon Core
Shaotao Zhi et al.
SENSORS (2019)
Detection of Crack Initiation and Growth Using Fiber Bragg Grating Sensors Embedded into Metal Structures through Ultrasonic Additive Manufacturing
Sean K. Chilelli et al.
SENSORS (2019)
Lab Non Destructive Test to Analyze the Effect of Corrosion on Ground Penetrating Radar Scans
Viviana Sossa et al.
REMOTE SENSING (2019)
Challenges in improving the performance of eddy current testing: Review
Ahmed N. AbdAlla et al.
MEASUREMENT & CONTROL (2019)
A literature review of next-generation smart sensing technology in structural health monitoring
Sandeep Sony et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2019)
Integrating Non-Destructive Testing, Laser Scanning, and Numerical Modeling for Damage Assessment: The Room of the Elements
Rebecca Napolitano et al.
HERITAGE (2019)
Overview of high temperature fibre Bragg gratings and potential improvement using highly doped aluminosilicate glass optical fibres
Maxime Cavillon et al.
JOURNAL OF PHYSICS-PHOTONICS (2019)
Artificial intelligence for non-destructive testing of CFRP prepreg materials
Carsten Schmidt et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2019)
Prospect of Using Artificial Intelligence for Microwave Nondestructive Testing Technique: A Review
Nawaf H. M. M. Shrifan et al.
IEEE ACCESS (2019)
Demonstration of Using Signal Feature Extraction and Deep Learning Neural Networks with Ultrasonic Data for Detecting Challenging Discontinuities in Composite Panels
John C. Aldrin et al.
45TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 38 (2019)
Quasi-Self-Powered Piezo-Floating-Gate Sensing Technology for Continuous Monitoring of Large-Scale Bridges
Kenji Aono et al.
FRONTIERS IN BUILT ENVIRONMENT (2019)
Implementation of a Battery-Free Wireless Sensor for Cyber-Physical Systems Dedicated to Structural Health Monitoring Applications
Gael Loubet et al.
IEEE ACCESS (2019)
A model-based approach for statistical assessment of detection and localization performance of guided wave-based imaging techniques
Jeremy Moriot et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2018)
Ultra-high-speed indirect x-ray imaging system with versatile spatiotemporal sampling capabilities
Emilio M. Escauriza et al.
APPLIED OPTICS (2018)
Identification of an effective nondestructive technique for bond defect determination in laminate composites-A technical review
Muhammad Asif et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
A Fabry-Perot Interferometer Strain Sensor Based on Concave-Core Photonic Crystal Fiber
Jiajun Tian et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2018)
Improvement of radiographic visibility using an image restoration method based on a simple radiographic scattering model for x-ray nondestructive testing
K. S. Kim et al.
NDT & E INTERNATIONAL (2018)
A review of Ground Penetrating Radar application in civil engineering: A 30-year journey from Locating and Testing to Imaging and Diagnosis
Wallace Wai-Lok Lai et al.
NDT & E INTERNATIONAL (2018)
Wind turbine sensor array for monitoring avian and bat collisions
Congcong Hu et al.
WIND ENERGY (2018)
Vertical Deformation Monitoring of the Suspension Bridge Tower Using GNSS: A Case Study of the Forth Road Bridge in the UK
Qusen Chen et al.
REMOTE SENSING (2018)
Jiangyin Bridge: An Example of Integrating Structural Health Monitoring with Bridge Maintenance
Zhen Sun et al.
STRUCTURAL ENGINEERING INTERNATIONAL (2018)
Interdigitated electrodes based on liquid metal encapsulated in elastomer as capacitive sensors and triboelectric nanogenerators
L. E. Helseth
NANO ENERGY (2018)
A review of infrared thermography for the investigation of building envelopes: Advances and prospects
Ayca Kirimtat et al.
ENERGY AND BUILDINGS (2018)
Non-destructive evaluation of ferromagnetic material thickness using Pulsed Eddy Current sensor detector coil voltage decay rate
Nalika Ulapane et al.
NDT & E INTERNATIONAL (2018)
The Model of a Fiber-Optic Sensor for Monitoring Mechanical Stresses in Mine Workings
A. V. Yurchenko et al.
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING (2018)
Damage detection in a laboratory wind turbine blade using techniques of ultrasonic NDT and SHM
Kai Yang et al.
STRAIN (2018)
Structural Health Monitoring (SHM) and Determination of Surface Defects in Large Metallic Structures using Ultrasonic Guided Waves
Muntazir Abbas et al.
SENSORS (2018)
Digital Shearography for NDT: Phase Measurement Technique and Recent Developments
Qihan Zhao et al.
APPLIED SCIENCES-BASEL (2018)
Continuous monitoring of a challenging heritage tower in Monza, Italy
Antonella Saisi et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2018)
AFM-IR: Technology and Applications in Nanoscale Infrared Spectroscopy and Chemical Imaging
Alexandre Dazzi et al.
CHEMICAL REVIEWS (2017)
Structural health monitoring of wind turbine blades using acoustic microphone array
Peyman Poozesh et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2017)
Data-based models for fatigue reliability of orthotropic steel bridge decks based on temperature, traffic and strain monitoring
Isaac Farreras-Alcover et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Real-time vibration-based structural damage detection using one-dimensional convolutional neural networks
Osama Abdeljaber et al.
JOURNAL OF SOUND AND VIBRATION (2017)
Experimental validation of cost-effective vision-based structural health monitoring
Dongming Feng et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
A spectral-based clustering for structural health monitoring of the Sydney Harbour Bridge
Mehrisadat Makki Alamdari et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
Automated detection of welding defects in pipelines from radiographic images DWDI
Neury Boaretto et al.
NDT & E INTERNATIONAL (2017)
Ultrasonic signal classification and imaging system for composite materials via deep convolutional neural networks
Min Meng et al.
NEUROCOMPUTING (2017)
Condition Assessment of Foundation Piles and Utility Poles Based on Guided Wave Propagation Using a Network of Tactile Transducers and Support Vector Machines
Ulrike Dackermann et al.
SENSORS (2017)
Deployment of a Smart Structural Health Monitoring System for Long-Span Arch Bridges: A Review and a Case Study
Zengshun Chen et al.
SENSORS (2017)
A Review of Microwave Thermography Nondestructive Testing and Evaluation
Hong Zhang et al.
SENSORS (2017)
An overview of ground-penetrating radar signal processing techniques for road inspections
Andrea Benedetto et al.
SIGNAL PROCESSING (2017)
The estimation of compressive stress level in brick masonry using the flat-jack method
Dawid Latka et al.
INTERNATIONAL CONFERENCE ON ANALYTICAL MODELS AND NEW CONCEPTS IN CONCRETE AND MASONRY STRUCTURES (2017)
On-site strength assessment of limestone based concrete slabs by combining non-destructive techniques
B. Craeye et al.
JOURNAL OF BUILDING ENGINEERING (2017)
Numerical analysis of break-off test method on concrete
Rahmat Madandoust et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Unmanned aerial vehicle acquisition of three-dimensional digital image correlation measurements for structural health monitoring of bridges
Daniel Reagan et al.
NONDESTRUCTIVE CHARACTERIZATION AND MONITORING OF ADVANCED MATERIALS, AEROSPACE, AND CIVIL INFRASTRUCTURE 2017 (2017)
Review of the use of air-coupled ultrasonic technologies for nondestructive testing of wood and wood products
Yiming Fang et al.
COMPUTERS AND ELECTRONICS IN AGRICULTURE (2017)
Vision-based multipoint displacement measurement for structural health monitoring
Dongming Feng et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2016)
A comparative study of using static and ultrasonic material testing methods to determine the anisotropic material properties of wood
Ulrike Dackermann et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
In situ assessment of structural timber using the resistance drilling method - Evaluation of usefulness
Tomasz P. Nowak et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Thermal (IR) and Other NDT Techniques for Improved Material Inspection
D. Balageas et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2016)
Simultaneous dual directional strain measurement using spatial phase-shift digital shearography
Yonghong Wang et al.
OPTICS AND LASERS IN ENGINEERING (2016)
Progress and trends in nondestructive testing and evaluation for wind turbine composite blade
Ruizhen Yang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
State-of-the Art and Development Prospects of Digital Radiography Systems for Nondestructive Testing, Evaluation, and Inspection of Objects: a Review
V. A. Udod et al.
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING (2016)
Ultrasonic Infrared Thermography in Non-Destructive Testing: A Review
M. Z. Umar et al.
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING (2016)
The Non-Destructive Test of Steel Corrosion in Reinforced Concrete Bridges Using a Micro-Magnetic Sensor
Hong Zhang et al.
SENSORS (2016)
Experimental investigation of bearing slip in a wind turbine gearbox during a transient grid loss event
J. Helsen et al.
WIND ENERGY (2016)
Image analyses for video-based remote structure vibration monitoring system
Yang Yang et al.
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2016)
A review of non-destructive testing methods of composite materials
S. Gholizadeh
XV PORTUGUESE CONFERENCE ON FRACTURE, PCF 2016 (2016)
Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials
Liu Junyan et al.
INFRARED PHYSICS & TECHNOLOGY (2015)
A new X-ray backscatter imaging technique for non-destructive testing of aerospace materials
Sanjeevareddy Kolkoori et al.
NDT & E INTERNATIONAL (2015)
A review of the application of acoustic emission technique in engineering
S. Gholizadeh et al.
STRUCTURAL ENGINEERING AND MECHANICS (2015)
The influence of temperature variations on ultrasonic guided waves in anisotropic CFRP plates
O. Putkis et al.
ULTRASONICS (2015)
The Millau Viaduct: Ten Years of Structural Monitoring
Emmanuel Cachot et al.
STRUCTURAL ENGINEERING INTERNATIONAL (2015)
Portable and convenient cable force measurement using smartphone
Xuefeng Zhao et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2015)
Elastic wave modes for the assessment of structural timber: ultrasonic echo for building elements and guided waves for pole and pile structures
Martin Krause et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2015)
Infrared thermography (IRT) applications for building diagnostics: A review
Angeliki Kylili et al.
APPLIED ENERGY (2014)
Rapid building damage assessment system using mobile phone technology
G. P. Cimellaro et al.
EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION (2014)
Evaluating the Reliability of Phones as Seismic Monitoring Instruments
Shideh Dashti et al.
EARTHQUAKE SPECTRA (2014)
Structural monitoring of a tower by means of MEMS-based sensing and enhanced autoregressive models
Roberto Guidorzi et al.
EUROPEAN JOURNAL OF CONTROL (2014)
Using multi-sensor data fusion for vibration fault diagnosis of rolling element bearings by accelerometer and load cell
M. S. Safizadeh et al.
INFORMATION FUSION (2014)
Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions
Denys Breysse et al.
MATERIALS AND STRUCTURES (2014)
In situ assessment of structural timber using stress-wave measurements
Ulrike Dackermann et al.
MATERIALS AND STRUCTURES (2014)
Crack detection limits in unit based masonry with terrestrial laser scanning
Debra F. Laefer et al.
NDT & E INTERNATIONAL (2014)
High-strength concrete - NDT with rebound hammer: influence of aggregate on test results
Jiri Brozovsky
NONDESTRUCTIVE TESTING AND EVALUATION (2014)
Infrared Thermography for Temperature Measurement and Non-Destructive Testing
Ruben Usamentiaga et al.
SENSORS (2014)
Chronology of Fabry-Perot Interferometer Fiber-Optic Sensors and Their Applications: A Review
Md Rajibul Islam et al.
SENSORS (2014)
Variability in bridge frequency induced by a parked vehicle
K. C. Chang et al.
SMART STRUCTURES AND SYSTEMS (2014)
Damage identification based on response-only measurements using cepstrum analysis and artificial neural networks
Ulrike Dackermann et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2014)
Virtual visual sensors and their application in structural health monitoring
Yi-Zhe Song et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2014)
Assessment of Complex Masonry Structures with GPR Compared to Other Non-Destructive Testing Studies
Sonia Santos-Assuncao et al.
REMOTE SENSING (2014)
Damage quantification in polymer composites using a hybrid NDT approach
Jefferson Cuadra et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Improving Performance of GMR Sensors
Andrea Bernieri et al.
IEEE SENSORS JOURNAL (2013)
Comparative Study on Buffeting Performance of Sutong Bridge Based on Design and Measured Spectrum
Hao Wang et al.
JOURNAL OF BRIDGE ENGINEERING (2013)
Damage detection using data-driven methods applied to moving-load responses
Filipe Cavadas et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)
Long-term monitoring and data analysis of the Tamar Bridge
E. J. Cross et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)
Real-time monitoring of phase maps of digital shearography
Lianqing Zhu et al.
OPTICAL ENGINEERING (2013)
Acoustic methods for the nondestructive testing of concrete: A review of foreign publications in the experimental field
M. Brigante et al.
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING (2013)
Monitoring and safety for prestressed bridge girders by SOFO sensors
Francesco Porco et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2013)
Assessment of timber structures using the X-Ray technology
Steffen Franke et al.
STRUCTURAL HEALTH ASSESSMENT OF TIMBER STRUCTURES (2013)
Comparison and validation of capacitive accelerometers for health care applications
Felix Buesching et al.
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE (2012)
Non-destructive testing of wood and wood-based materials
Peter Niemz et al.
JOURNAL OF CULTURAL HERITAGE (2012)
A review of three magnetic NDT technologies
Z. D. Wang et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2012)
A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization
G. De Angelis et al.
NDT & E INTERNATIONAL (2012)
Pattern recognition approach to identify natural clusters of acoustic emission signals
M. G. R. Sause et al.
PATTERN RECOGNITION LETTERS (2012)
Fiber Bragg Grating Sensors for Harsh Environments
Stephen J. Mihailov
SENSORS (2012)
Investigation of Wireless Sensor Networks for Structural Health Monitoring
Ping Wang et al.
JOURNAL OF SENSORS (2012)
Using high-speed digital image correlation to determine the damping ratio
Robert Hunady et al.
MODELLING OF MECHANICAL AND MECHATRONICS SYSTEMS (2012)
Ultrasonic Non-Destructive Testing (NDT) Using Wireless Sensor Networks
Ahmad El Kouche et al.
ANT 2012 AND MOBIWIS 2012 (2012)
Temperature effect on vibration properties of civil structures: a literature review and case studies
Yong k Xia et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2012)
Pothole detection in asphalt pavement images
Christian Koch et al.
ADVANCED ENGINEERING INFORMATICS (2011)
A Synchronized Wireless Sensor Network for Experimental Modal Analysis in Structural Health Monitoring
Maurizio Bocca et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2011)
Recent progress in infrared detector technologies
A. Rogalski
INFRARED PHYSICS & TECHNOLOGY (2011)
Performance evaluation of a gamma-ray imaging system for nondestructive testing of welded pipes
H. S. Cho et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT (2011)
Fiber Optic Sensors for Structural Health Monitoring of Air Platforms
Honglei Guo et al.
SENSORS (2011)
A Review of Optical NDT Technologies
Yong-Kai Zhu et al.
SENSORS (2011)
Impact of Raman scattering and modulation instability on the performances of Brillouin sensors
Stella M. Foaleng et al.
21ST INTERNATIONAL CONFERENCE ON OPTICAL FIBER SENSORS (2011)
High temperature ultrasonic transducer up to 1000 °C using lithium niobate single crystal
Atsushi Baba et al.
APPLIED PHYSICS LETTERS (2010)
Neutron radiography using neutron imaging plate
Nares Chankow et al.
APPLIED RADIATION AND ISOTOPES (2010)
UV Sensor Based on Photomechanically Functional Polymer-Coated FBG
Hyun-Kyoung Kim et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2010)
Development of Dual PZT Transducers for Reference-Free Crack Detection in Thin Plate Structures
Hoon Sohn et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2010)
Sensor Network for Structural Health Monitoring of a Highway Bridge
Michael Fraser et al.
JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2010)
Piezoelectric Wafer Active Sensor Structural Health Monitoring of Space Structures
Andrei Zagrai et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2010)
Shearography technology and applications: a review
D. Francis et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2010)
Development of a low-cost multifunctional wireless impedance sensor node
Jiyoung Min et al.
SMART STRUCTURES AND SYSTEMS (2010)
Flexible smart sensor framework for autonomous structural health monitoring
Jennifer A. Rice et al.
SMART STRUCTURES AND SYSTEMS (2010)
Close-range terrestrial digital photogrammetry and terrestrial laser scanning for discontinuity characterization on rock cuts
M. Sturzenegger et al.
ENGINEERING GEOLOGY (2009)
Artificial Neural Network (ANN)-based Crack Identification in Aluminum Plates with Lamb Wave Signals
Ye Lu et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2009)
NDT&E using shearography with impulsive thermal stressing and clustering phase extraction
Y. H. Huang et al.
OPTICS AND LASERS IN ENGINEERING (2009)
Aerodynamic force measurement using 3-component accelerometer force balance system in a hypersonic shock tunnel
S. Saravanan et al.
SHOCK WAVES (2009)
Wireless impedance sensor nodes for functions of structural damage identification and sensor self-diagnosis
Seunghee Park et al.
SMART MATERIALS & STRUCTURES (2009)
Nondestructive testing and crack evaluation of ferromagnetic material by using the linearly integrated hall sensor array
Jinyi Lee et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2008)
A far-field airborne radar NDT technique for detecting debonding in GFRP-retrofitted concrete structures
Tzu-Yang Yu et al.
NDT & E INTERNATIONAL (2008)
Flat elements on buildings using close-range photogrammetry and laser distance measurement
Jaime Rodriguez et al.
OPTICS AND LASERS IN ENGINEERING (2008)
Simultaneous coherent imaging and strain measurement using coupled photorefractive holography and shearography
Vanessa Rosso et al.
OPTICS LETTERS (2008)
An NDT technique for composite structures using visualized Lamb-wave propagation
S. Yashiro et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Development of distributed long-gage fiber optic sensing system for structural health monitoring
Suzhen Li et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2007)
Accuracy of pavement thicknesses estimation using different ground penetrating radar analysis approaches
Andreas Loizos et al.
NDT & E INTERNATIONAL (2007)
Recent advances in automated ultrasonic inspection of Magnox power stations
A. B. Wooldridge
MATERIALPRUFUNG (2007)
Design and analysis of a flat accelerometer-based force balance system for shock tunnel testing
Niranjan Sahoo et al.
MEASUREMENT (2007)
Multiple crack detection of concrete structures using impedance-based structural health monitoring techniques
S. Park et al.
EXPERIMENTAL MECHANICS (2006)
Use of eddy current testing method in detection and evaluation of sensitisation and intergranular corrosion in austenitic stainless steels
H. Shaikh et al.
CORROSION SCIENCE (2006)
Ultrasound and damage detection in CFRP using fiber Bragg grating sensors
H Tsuda
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Structural health monitoring of concrete cylinders using protected fibre optic sensors
JS Leng et al.
SMART MATERIALS AND STRUCTURES (2006)
Ultrasonic C-Scan and shearography NDI techniques evaluation of impact defects identification
R Ruzek et al.
NDT & E INTERNATIONAL (2006)
Infrared thermography: An optical method in heat transfer and fluid flow visualisation
T Astarita et al.
OPTICS AND LASERS IN ENGINEERING (2006)
Long term vibration monitoring of an RC slab: Temperature and humidity effect
Y Xia et al.
ENGINEERING STRUCTURES (2006)
Modelling ground penetrating radar by GprMax
A Giannopoulos
CONSTRUCTION AND BUILDING MATERIALS (2005)
Technology developments in structural health monitoring of large-scale bridges
JM Ko et al.
ENGINEERING STRUCTURES (2005)
A hybrid piezoelectric/fiber optic diagnostic system for structural health monitoring
XL Qing et al.
SMART MATERIALS & STRUCTURES (2005)
Shearography: An optical measurement technique and applications
YY Hung et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Development of a vibrating wire strain gauge for measuring small strains in concrete beams
SA Neild et al.
STRAIN (2005)
Single-axis combined shearography and digital speckle photography instrument for full surface strain characterization
RM Groves et al.
OPTICAL ENGINEERING (2005)
Structural health monitoring using scanning laser vibrometry: II. Lamb waves for damage detection
L Mallet et al.
SMART MATERIALS & STRUCTURES (2004)
Analogue and digital sensor interfaces for impedance spectroscopy
J Schröder et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2004)
New and future applications of fluxgate sensors
F Kaluza et al.
SENSORS AND ACTUATORS A-PHYSICAL (2003)
Quantitative damage detection in cross-ply laminates using Lamb wave method
N Toyama et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Design of piezoresistive MEMS-based accelerometer for integration with wireless sensing unit for structural monitoring
JP Lynch et al.
JOURNAL OF AEROSPACE ENGINEERING (2003)
Unified approach for holography and shearography in surface deformation measurement and nondestructive testing
MYY Hung et al.
OPTICAL ENGINEERING (2003)
Structural health monitoring of smart composite materials by using EFPI and FBG sensors
J Leng et al.
SENSORS AND ACTUATORS A-PHYSICAL (2003)
Monitoring of the Scrovegni Chapel by IR thermography: Giotto at infrared
E Grinzato et al.
INFRARED PHYSICS & TECHNOLOGY (2002)
Characterization of fiber optic sensors for structural health monitoring
DG Lee et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Recent developments in SQUID NDE
HJ Krause et al.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2002)
Structural health monitoring of innovative bridges in Canada with fiber optic sensors
RC Tennyson et al.
SMART MATERIALS & STRUCTURES (2001)
Structural health monitoring using a fiber optic polarimetric sensor and a fiber optic curvature sensor - static and dynamic test
JJ Ma et al.
SMART MATERIALS & STRUCTURES (2001)
Holographic testing of Terahertz antennas
G Junkin et al.
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2000)