Acoustic Wave Reflection in Water Affects Underwater Wireless Sensor Networks

The phenomenon of acoustic wave reflection off fluid-solid surfaces is the focus of this research. This research aims to measure the effect of material physical qualities on oblique incidence acoustic attenuation across a large frequency range. To construct the extensive comparison shown in the supporting documentation, reflection coefficient curves were generated by carefully adjusting the porousness and permeability of the poroelastic solid. The next stage in determining its acoustic response is to determine the pseudo-Brewster angle shift and the reflection coefficient minimum dip for the previously indicated attenuation permutations. This circumstance is made possible by modeling and studying the reflection and absorption of acoustic plane waves encountering half-space and two-layer surfaces. For this purpose, both viscous and thermal losses are taken into account. According to the research findings, the propagation medium has a significant impact on the form of the curve that represents the reflection coefficient, whereas the effects of permeability, porosity, and driving frequency are relatively less significant to the pseudo-Brewster angle and curve minima, respectively. This research additionally found that as permeability and porosity increase, the pseudo-Brewster angle shifts to the left (proportionally to porosity increase) until it reaches a limiting value of 73.4 degrees, and that the reflection coefficient curves for each level of porosity exhibit a greater angular dependence, with an overall decrease in magnitude at all incident angles. These findings are given within the framework of the investigation (in proportion to the increase in porosity). The study concluded that when permeability declined, the angular dependence of frequency-dependent attenuation reduced, resulting in iso-porous curves. The study also discovered that the matrix porosity largely affected the angular dependency of the viscous losses in the range of 1.4 x 10(-14) m(2) permeability.

Automated summary

This research focuses on the reflection of acoustic waves off fluid-solid surfaces. It aims to study the impact of material physical qualities on acoustic attenuation under oblique incidence across a wide frequency range. The research generates reflection coefficient curves by adjusting the porousness and permeability of the poroelastic solid and explores the pseudo-Brewster angle shift and reflection coefficient minimum dip. The findings reveal that the propagation medium significantly influences the shape of the reflection coefficient curve, while permeability, porosity, and frequency have relatively less impact on the pseudo-Brewster angle and curve minima.