4.7 Article

The Slake Durability of Argillaceous and Non-argillaceous Rocks: Insights From Effects of the Wetting-Drying and Rock Lumps Abrasion

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Investigating the durability of weak rocks to forecast their long-term behaviors

Mehdi Torabi-Kaveh et al.

Summary: Predicting the long-term durability of weak rocks in civil projects is challenging. In this research, three types of weak rocks were investigated from a durability perspective. The results show that samples with clay minerals are less durable than limestone samples, and silicate mineral samples are sensitive to pH levels.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2022)

Article Engineering, Geological

A Comparative Study of Point Load Index Test Procedures in Predicting the Uniaxial Compressive Strength of Sandstones

Amin Jamshidi

Summary: This study compares the accuracy of the four procedures of the point load index (PLI) test in predicting the uniaxial compressive strength (UCS), and evaluates the effect of density and porosity on the correlation between UCS and PLI.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Article Geosciences, Multidisciplinary

The effects of water acidity and engineering properties on rock durability

Reza Khajevand et al.

Summary: Fifteen sedimentary rock samples from four different types were collected in the Damghan area of northern Iran for mineralogical studies and laboratory experiments. The results showed that the slake-durability index of the rocks is affected by the pH of the test fluids, and different rock types exhibited distinctive slaking behaviors. Regression analyses revealed that the evaluated parameters are correlated to the slake-durability index.

EARTH SCIENCES RESEARCH JOURNAL (2022)

Article

Slaking behavior of evaporitic rocks from Abu Dhabi area, United Arab Emirates

Hasan Arman et al.

Arabian Journal of Geosciences (2021)

Article Engineering, Environmental

Relationship between durability index and uniaxial compressive strength of a gneissic rock at different weathering grades

Joao P. Monticelli et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)

Article Engineering, Environmental

Utilization of the accelerated weathering test method for evaluating the durability of sedimentary rocks

Davood Fereidooni et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2019)

Article Engineering, Geological

The Effect of Density and Porosity on the Correlation Between Uniaxial Compressive Strength and P-wave Velocity

Amin Jamshidi et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Article Engineering, Geological

Durability of soft rocks in Eocene flysch formation (Dalmatia, Croatia)

Goran Vlastelica et al.

ENGINEERING GEOLOGY (2018)

Article Engineering, Geological

The Effect of pH of the Testing Liquid on the Degradability of Carbonate Rocks

Saffet Yagiz

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2018)

Article Engineering, Environmental

Estimating the uniaxial compressive strength of pyroclastic rocks from the slake durability index

Sair Kahraman et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2017)

Article Engineering, Environmental

The effect of weathering on durability and deformability properties of granitoid rocks

A. Momeni et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2017)

Article Engineering, Environmental

Engineering properties and durability of limestones used in Persepolis complex, Iran, against acid solutions

Majid Taghipour et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2016)

Article Engineering, Geological

Comparing the Slaking of Clay-Bearing Rocks Under Laboratory Conditions to Slaking Under Natural Climatic Conditions

T. P. Gautam et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Article Environmental Sciences

The effect of freeze-thaw process on the physical and mechanical properties of tuff

M. H. Ghobadi et al.

ENVIRONMENTAL EARTH SCIENCES (2016)

Article Geosciences, Multidisciplinary

Empirical correlation of physical and mechanical properties of marly rocks with P wave velocity

Abdolazim Azimian et al.

ARABIAN JOURNAL OF GEOSCIENCES (2015)

Article Engineering, Geological

Role of expansive soil and topography on slope failure and its countermeasures, Yun County, China

Hongtao Jiang et al.

ENGINEERING GEOLOGY (2013)

Article Engineering, Geological

Point Load Test on Meta-Sedimentary Rocks and Correlation to UCS and BTS

Diyuan Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2013)

Article Geochemistry & Geophysics

Correlating P-wave Velocity with the Physico-Mechanical Properties of Different Rocks

Manoj Khandelwal

PURE AND APPLIED GEOPHYSICS (2013)

Article Engineering, Geological

Determination of strength parameters and quality assessment of Denizli travertines (SW Turkey)

Ibrahim Cobanoglu et al.

ENGINEERING GEOLOGY (2012)

Article Engineering, Environmental

Experimental assessment of long-term durability of some weak rocks

Kittitep Fuenkajorn

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2011)

Article Engineering, Environmental

Correlation between slake durability and rock properties for some carbonate rocks

Saffet Yagiz

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2011)

Article Materials Science, Multidisciplinary

P-wave velocity test for assessment of geotechnical properties of some rock materials

Saffet Yagiz

BULLETIN OF MATERIALS SCIENCE (2011)

Article Environmental Sciences

Assessment of granitic rocks degradability susceptive to acid solutions in urban area

M. H. Ghobadi et al.

ENVIRONMENTAL EARTH SCIENCES (2011)

Article Engineering, Geological

Durability Characterization of Marls from the Region of Dalmatia, Croatia

Predrag Miscevic et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2011)

Article Engineering, Geological

The 2007 Fox Creek landslide, Peace River Lowland, Alberta, Canada

Tai Hoon Kim et al.

LANDSLIDES (2010)

Article Engineering, Environmental

Lessons Learned from Rates of Mudrock Undercutting Measured over Two Time Periods

William L. Niemann

ENVIRONMENTAL & ENGINEERING GEOSCIENCE (2009)

Article Engineering, Environmental

A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength

P. K. Sharma et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2008)

Article Engineering, Environmental

The effect of the pH of the testing liquid on the slake durability of gypsum

K Kayabali et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2006)

Article Engineering, Geological

A study of the durability of some shales, mudrocks and siltstones from Brazil

Eduardo Marques et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2005)

Article Environmental Sciences

Slaking durability and its effect on the doline formation in the gypsum

I Yilmaz et al.

ENVIRONMENTAL GEOLOGY (2005)

Article Environmental Sciences

Slake durability study of shaly rock and its predictions

TN Singh et al.

ENVIRONMENTAL GEOLOGY (2005)

Article Engineering, Geological

Slake durability and mineralogical properties of some pyroclastic and sedimentary rocks

G Dhakal et al.

ENGINEERING GEOLOGY (2002)