4.7 Article

Advanced, extended and combined extended-advanced exergy analyses of a novel geothermal powered combined cooling, heating and power (CCHP) system

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Multi-mode and exergoeconomic analysis of a novel combined cooling, heating, and power system applied in the geothermal field

Shukun Wang et al.

Summary: The exploitation and utilization of geothermal resources can alleviate energy crisis and reduce environmental pollution caused by fossil fuels. This study proposes a multi-mode CCHP system driven by a closed-type geothermal heat source, which can operate in seven different modes for power, heating, and cooling capacity conversion.

ENERGY CONVERSION AND MANAGEMENT (2023)

Article Thermodynamics

Proposal and thermoeconomic assessment of an efficient booster- assisted CCHP system based on solar-geothermal energy

H. Rostamnejad Takleh et al.

Summary: An efficient solar-geothermal system is proposed for cooling, heating, and power generation. The system is optimized using energy, exergy, and thermoeconomic analyses for three different working fluids. The results show that the system performs best when using R423A as the working fluid, achieving high energy efficiency and cost savings.

ENERGY (2022)

Article Green & Sustainable Science & Technology

Thermo-mechanical energy level approach integrated with exergoeconomic optimization for realistic cost evaluation of a novel micro-CCHP system

Milad Feili et al.

Summary: Conventional exergoeconomic analysis lacks solid conceptual meaning behind its auxiliary cost equations. To address this issue, a modified exergoeconomic analysis is used in this study, which integrates the energy level of each stream. The unit cost of streams is modified based on their energy level, significantly affecting the overall unit cost of product. A new integral micro-CCHP system driven by geothermal source is proposed and economically evaluated using the recommended modified exergoeconomic approach. Multi-objective optimization is used to find an equilibrium point as the final optimal point. The superiority of the devised micro-CCHP system over similar benchmarks in terms of thermodynamics and thermoeconomics is demonstrated.

RENEWABLE ENERGY (2022)

Article Energy & Fuels

Enhancing the performance of an integrated CCHP system including ORC, Kalina, and refrigeration cycles through employing TEG: 3E analysis and multi-criteria optimization

Farayi Musharavati et al.

Summary: The study conducted thermodynamic modeling, exergo-economic analysis, and multi-objective optimization of an integrated geothermal based CCHP system coupled with thermoelectric generator. The optimum conditions for the system were determined, and parametric study was performed to analyze different thermodynamic and economic criteria.

GEOTHERMICS (2021)

Article Thermodynamics

Proposal and thermoeconomic evaluation with reliability considerations of geothermal driven trigeneration systems with independent operations for summer and winter

H. Rostamnejad Takleh et al.

Summary: Novel tri-generation systems have been developed to operate in a complete CHP or CCP mode with a relatively simple configuration for cost-effective design. The study concluded that System II has higher levelized product cost and exergy efficiency in summer mode, while System I performs better in terms of heating output and thermal efficiency in winter mode.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

Article Thermodynamics

Exergy destruction analysis of a low-temperature Compressed Carbon dioxide Energy Storage system based on conventional and advanced exergy methods

Yuan Zhang et al.

Summary: Compressed Carbon dioxide Energy Storage (CCES) system is a novel technology for energy storage, offering a solution to the instability of renewable energy sources. Research has shown that utilizing both conventional and advanced exergy analysis can optimize system performance and improve overall exergy efficiency.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Impact and quantification of various individual thermodynamic improvements for transcritical R744 supermarket refrigeration systems based on advanced exergy analysis

Paride Gullo

Summary: The study evaluated and compared transcritical R744 supermarket refrigeration systems using advanced exergy analysis, finding that advanced solutions like parallel compression and overfed evaporators could significantly reduce unavoidable irreversibilities, offering potential for system performance enhancement.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

Assessment of a high-performance geothermal-based multigeneration system for production of power, cooling, and hydrogen: Thermodynamic and exergoeconomic evaluation

Hossein Azariyan et al.

Summary: The novel multigeneration system utilizes geothermal energy, Kalina cycle, absorption refrigeration system, and electrolyzer to produce power, cooling, and hydrogen efficiently. The system has been evaluated thermodynamically and exergoeconomically, showing high efficiencies and the highest exergy destruction rate in condenser 1.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

Novel combined extended-advanced exergy analysis methodology as a new tool to assess thermodynamic systems

Emin Acikkalp et al.

Summary: A novel combined extended-advanced exergy analysis method has been developed and applied to a gas turbine system for a case study, showing its variability. The method integrates various thermodynamic analysis methodologies to assess all input parameters including labor, capital, and environment with better efficiency.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Green & Sustainable Science & Technology

Advanced exergy analyses and optimization of a cogeneration system for ceramic industry by considering endogenous, exogenous, avoidable and unavoidable exergies under different environmental conditions

Hasan Caglayan et al.

Summary: The study conducted traditional and advanced exergy analyses on the cogeneration system in a ceramic factory, revealing that optimization under different environmental conditions can significantly improve the system's efficiency. Specifically, improving certain components can increase the system's exergy efficiency by 15% to 17%.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Energy & Fuels

Energy, Exergy, Exergoeconomic, and Exergoenvironmental Assessment of Flash-Binary Geothermal Combined Cooling, Heating and Power Cycle

Moein Shamoushaki et al.

Summary: The study demonstrates that optimizing production well inlet temperature and cooling to power flow ratio can improve the efficiency and reduce the total cost of geothermal CCHP cycle. However, increasing production well temperature can increase total plant cost, while increasing cooling to power flow ratio can decrease net power generation.

ENERGIES (2021)

Article Thermodynamics

Application of advanced exergy analysis for optimizing the design of carbon dioxide pressurization system

Hafiz Ali Muhammad et al.

Summary: The study aims to reduce energy consumption in the carbon dioxide pressurization process by assisting with a heat-pump system and using advanced exergy analysis to identify avoidable irreversibilities and improve system performance. The results indicate significant potential for energy savings and improved efficiency through systematic optimization and integration of the heat-pump system with a supercritical carbon dioxide power cycle.

ENERGY (2021)

Article Thermodynamics

Performance analysis of a solar-assisted combined cooling, heating and power system with an improved operation strategy

Hongjuan Hou et al.

Summary: The performance and economics of a solar-assisted combined cooling, heating, and power system depend on the system's structure, operation strategy, and choice of facility capacity. An improved operation strategy called best operation condition point (BOCP) strategy was proposed and applied in this study. A case study of an apartment building in Guangzhou was conducted to verify the feasibility of the proposed system, showing significant energy-saving benefits.

ENERGY (2021)

Article Thermodynamics

Advanced exergy and exergoeconomic analysis for a polygeneration plant operating in geothermal cascade

Victor M. Ambriz-Diaz et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Green & Sustainable Science & Technology

Thermodynamic and thermoeconomic analysis of a novel ammonia-water mixture combined cooling, heating, and power (CCHP) cycle

Towhid Parikhani et al.

RENEWABLE ENERGY (2020)

Article Green & Sustainable Science & Technology

Advanced exergy analyses of modified ethane recovery processes with different refrigeration cycles

Shijian Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Exergoeconomic optimization of a novel multigeneration system driven by geothermal heat source and liquefied natural gas cold energy recovery

Towhid Parikhani et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Thermodynamics

Energy, exergy, economic and advanced and extended exergy analyses of a wind turbine

M. A. Ehyaei et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Thermodynamics

Advanced exergy, exergo-economic and exrgo-environmental analyses of a solar based trigeneration energy system

Hadis Montazerinejad et al.

APPLIED THERMAL ENGINEERING (2019)

Article Thermodynamics

Advanced exergy analysis of a combined Brayton/Brayton power cycle

A. K. Mossi Idrissa et al.

ENERGY (2019)

Article Construction & Building Technology

Performance assessment of an ice rink refrigeration system through advanced exergoeconomic analysis method

Gulcan Ozel Erol et al.

ENERGY AND BUILDINGS (2017)

Review Green & Sustainable Science & Technology

Energy, exergy, environmental, enviroeconomic, exergoenvironmental (EXEN) and exergoenviroeconomic (EXENEC) analyses of solar collectors

Hakan Caliskan

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Thermodynamics

Energy and exergy analyses of a combined desalination and CCHP system driven by geothermal energy

Amin Mohammadi et al.

APPLIED THERMAL ENGINEERING (2017)

Article Thermodynamics

Exergoeconomic multi objective optimization and sensitivity analysis of a regenerative Brayton cycle

Mohammad Mandi Naserian et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Article Green & Sustainable Science & Technology

Thermodynamic optimization of organic Rankine cycle using two-stage evaporation

Tailu Li et al.

RENEWABLE ENERGY (2015)

Article Thermodynamics

Advanced exergoeconomic analysis of a trigeneration system using a diesel-gas engine

Emin Acikkalp et al.

APPLIED THERMAL ENGINEERING (2014)

Article Thermodynamics

On avoidable and unavoidable exergy destructions and investment costs in thermal systems

G Tsatsaronis et al.

ENERGY CONVERSION AND MANAGEMENT (2002)