相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Research progress on flow and heat transfer characteristics of fluids in metal foams
Haitao Hu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2023)
Thermal and hydrodynamic behavior of forced convection gaseous slip flow in a Kelvin cell metal foam
Safa Sabet et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)
Lattice Boltzmann Method simulation of flow and forced convective heat transfer on 3D micro X-ray tomography of metal foam heat sink
E. Hamidi et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)
A new optimized artificial neural network model to predict thermal efficiency and water yield of tubular solar still
Essam B. Moustafa et al.
CASE STUDIES IN THERMAL ENGINEERING (2022)
Machine learning-based prediction and augmentation of dish solar distiller performance using an innovative convex stepped absorber and phase change material with nanoadditives
Ahmad Bamasag et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)
Heat transfer enhancement of phase change materials embedded with metal foam for thermal energy storage: A review
Wei Cui et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)
Inclination angles on the thermal behavior of Phase-Change Material (PCM) in a cavity filled with copper foam partly
Xi Meng et al.
CASE STUDIES IN THERMAL ENGINEERING (2021)
Combined effect of using porous media and nano-particle on melting performance of PCM filled enclosure with triangular double fins
Shu-Bo Chen et al.
CASE STUDIES IN THERMAL ENGINEERING (2021)
Effect of airflow channel arrangement on the discharge of a composite metal foam-phase change material heat exchanger
Pouyan Talebizadehsardari et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)
A critical assessment on synergistic improvement in PCM based thermal batteries
M. S. Naghavi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage
Shuai Zhang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Preparation and effective thermal conductivity of a Paraffin/ Metal Foam composite
Mohamed Moussa El Idi et al.
JOURNAL OF ENERGY STORAGE (2021)
Transient heat transfer analysis of phase change material melting in metal foam by experimental study and artificial neural network
Juan Duan et al.
JOURNAL OF ENERGY STORAGE (2021)
Metal foam/PCM melting evolution analysis: Orientation and morphology effects
Marcello Iasiello et al.
APPLIED THERMAL ENGINEERING (2021)
Experimental analysis of a latent heat storage unit with multichannel flat tube and copper foam
Yanhua Diao et al.
APPLIED THERMAL ENGINEERING (2021)
A novel heat sink for cooling concentrator photovoltaic system using PCM-porous system
Juan Duan
APPLIED THERMAL ENGINEERING (2021)
Latent Heat Thermal Storage of Nano-Enhanced Phase Change Material Filled by Copper Foam with Linear Porosity Variation in Vertical Direction
Mohammad Ghalambaz et al.
ENERGIES (2021)
Thermal storage analysis of a foam-filled PCM heat exchanger subjected to fluctuating flow conditions
Xue Chen et al.
ENERGY (2021)
Heat transfer enhancement of nano-encapsulated phase change material (NEPCM) using metal foam for thermal energy storage
W. Q. Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Solution combustion synthesized copper foams for enhancing the thermal transfer properties of phase change material
Nan Sheng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Thermal Energy Storage and Heat Transfer of Nano-Enhanced Phase Change Material (NePCM) in a Shell and Tube Thermal Energy Storage (TES) Unit with a Partial Layer of Eccentric Copper Foam
Mohammad Ghalambaz et al.
MOLECULES (2021)
Phase-Transition Thermal Charging of a Channel-Shape Thermal Energy Storage Unit: Taguchi Optimization Approach and Copper Foam Inserts
Mohammad Ghalambaz et al.
MOLECULES (2021)
PCM embedded radiant chilled ceiling: A state-of-the-art review
Seyedmostafa Mousavi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
Melting of PCMs Embedded in Copper Foams: An Experimental Study
Andrea Diani et al.
MATERIALS (2021)
Influence of the Copper Foam Fin (CFF) shapes on thermal performance of Phase-Change Material (PCM) in an enclosed cavity
Xi Meng et al.
CASE STUDIES IN THERMAL ENGINEERING (2021)
Simulations of melting performance enhancement for a PCM embedde d in metal periodic structures
Chunrong Zhao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
A passive thermal management system of Li-ion batteries using PCM composites: Experimental and numerical investigations
Mohamed Moussa El Idi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Three-dimensional numerical investigation on melting performance of phase change material composited with copper foam in local thermal non-equilibrium containing an internal heater
Xiaochun Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Heat transfer performance of a finned metal foam-phase change material (FMF-PCM) system incorporating triply periodic minimal surfaces (TPMS)
Zahid Ahmed Qureshi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Productivity forecasting of solar distiller integrated with evacuated tubes and external condenser using artificial intelligence model and moth-flame optimizer
Ammar H. Elsheikh et al.
CASE STUDIES IN THERMAL ENGINEERING (2021)
Performance enhancement of a thermoelectric harvester with a PCM/Metal foam composite
S. M. Borhani et al.
RENEWABLE ENERGY (2021)
A comprehensive review on development of eutectic organic phase change materials and their composites for low and medium range thermal energy storage applications
P. Singh et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)
Influence of the copper foam shape on thermal performance of phase-change material
Yanna Gao et al.
JOURNAL OF ENERGY STORAGE (2021)
Numerical study on the performance of shell-and-tube thermal energy storage using multiple PCMs and gradient copper foam
Liang Pu et al.
RENEWABLE ENERGY (2021)
Experimental and numerical investigations of latent thermal energy storage using combined flat micro-heat pipe array-metal foam configuration: Simultaneous charging and discharging
L. Liang et al.
RENEWABLE ENERGY (2021)
Heat transfer enhancement in latent heat thermal energy storage using copper foams with varying porosity
Jie Lei et al.
SOLAR ENERGY (2021)
The graphite foam/erythritol composites with ultrahigh thermal conductivity for medium temperature applications
Heyao Zhang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)
Form-stable paraffin/graphene aerogel/copper foam composite phase change material for solar energy conversion and storage
Xiangjun Zheng et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)
A numerical study on acceleration of melting process under forced convection by using high thermal conductive porous media
Chunyang Wang et al.
HEAT TRANSFER ENGINEERING (2020)
Numerical Analysis on a Latent Thermal Energy Storage System with Phase Change Materials and Aluminum Foam
Bernardo Buonomo et al.
HEAT TRANSFER ENGINEERING (2020)
Thermal performance analysis of metallic foam-based heat sinks embedded with RT-54HC paraffin: an experimental investigation for electronic cooling
Tauseef-ur-Rehman et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Numerical evaluation of a thermal management system consisting PCM and porous metal foam for Li-ion batteries
Y. Salami Ranjbaran et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Phase change material thermal energy storage systems for cooling applications in buildings: A review
Khaireldin Faraj et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Discharge of a composite metal foam/phase change material to air heat exchanger for a domestic thermal storage unit
Pouyan Talebizadeh Sardari et al.
RENEWABLE ENERGY (2020)
Design and operating evaluation of a finned shell-and-tube thermal energy storage unit filled with metal foam
Xiaohu Yang et al.
APPLIED ENERGY (2020)
Performance evaluation and analysis of a vertical heat pipe latent thermal energy storage system with fins-copper foam combination
Chunwei Zhang et al.
APPLIED THERMAL ENGINEERING (2020)
Effect of porous medium and nanoparticles presences in a counter-current triple-tube composite porous/nano-PCM system
Zhixiong Li et al.
APPLIED THERMAL ENGINEERING (2020)
Numerical study on heat transfer enhancement of PCM using three combined methods based on heat pipe
Chunwei Zhang et al.
ENERGY (2020)
Pore-scale investigation on flow boiling heat transfer mechanisms in open-cell metal foam by LBM
J. Qin et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)
Thermal characterization of a heat exchanger equipped with a combined material of phase change material and metallic foams
Ratiba Sabrina Ferfera et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Computational study of a latent heat thermal energy storage system enhanced by highly conductive metal foams and heat pipes
Saeed Tiari et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Stearic Acid/Copper Foam as Composite Phase Change Materials for Thermal Energy Storage
Chuanchang Li et al.
JOURNAL OF THERMAL SCIENCE (2020)
Aluminum Inserts for Enhancing Heat Transfer in PCM Accumulator
Anna Dmitruk et al.
MATERIALS (2020)
Numerical study of melting-process of a non-Newtonian fluid inside a metal foam
S. A. M. Mehryan et al.
ALEXANDRIA ENGINEERING JOURNAL (2020)
Experimental investigation on paraffin melting in high porosity copper foam under centrifugal accelerations
Hao Zhang et al.
APPLIED THERMAL ENGINEERING (2020)
Phase change heat transfer in an L-shape heatsink occupied with paraffin-copper metal foam
Ali Chamkha et al.
APPLIED THERMAL ENGINEERING (2020)
Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foams
Chunrong Zhao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Impact of using a PCM-metal foam composite on charging/discharging process of bundled-tube LHTES units
Ahmed Alhusseny et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Experimental and numerical investigation of the melting process of aluminum foam/paraffin composite with low porosity
Feng Zhu et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2020)
Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle
Mohammad Mahdi Heyhat et al.
JOURNAL OF ENERGY STORAGE (2020)
Comparison of energy absorption characteristics of PCM-metal foam systems with different pore size distributions
Battula Venkata Sai Dinesh et al.
JOURNAL OF ENERGY STORAGE (2020)
Experimental study on tubular solar still using Graphene Oxide Nano particles in Phase Change Material (NPCM's) for fresh water production
A. E. Kabeel et al.
JOURNAL OF ENERGY STORAGE (2020)
The impact of heterogeneous pin based micro-structures on flow dynamics and heat transfer in micro-scale heat exchangers
Mohammad Zargartalebi et al.
PHYSICS OF FLUIDS (2020)
Evaluation of thermal and fluid dynamic performance parameters in aluminum foam compact heat exchangers
Bernardo Buonomo et al.
APPLIED THERMAL ENGINEERING (2020)
Influence of cascaded graphite foams on thermal performance of high temperature phase change material storage systems
Michael Opolot et al.
APPLIED THERMAL ENGINEERING (2020)
Investigation of a double-PCM-based thermoelectric energy-harvesting device using temperature fluctuations in an ambient environment
Xinzhong Liao et al.
ENERGY (2020)
Pore scale investigations on melting of phase change materials considering the interfacial thermal resistance
Wen-Zhen Fang et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)
Lattice Boltzmann simulation of forced convection melting of a composite phase change material with heat dissipation through an open-ended channel
R. Mabrouk et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Total enthalpy-based lattice Boltzmann simulations of melting in paraffin/metal foam composite phase change materials
Maximilian Gaedtke et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Experimental study of phase change material (PCM) embedded in 3D periodic structures realized via additive manufacturing
Giulia Righetti et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)
Evaluation and optimization of melting performance of latent thermal s
Y. Wang et al.
JOURNAL OF ENERGY STORAGE (2020)
Development of hybrid cooling method with PCM and Al2O3 nanofluid in aluminium minichannels using heat source model of Li-ion batteries
Masoud Mashayekhi et al.
APPLIED THERMAL ENGINEERING (2020)
Experimental and numerical assessments of thermal transport in fins and metal foam infused latent heat thermal energy storage systems: A comparative evaluation
Varun Joshi et al.
APPLIED THERMAL ENGINEERING (2020)
Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam
Chengzhi Hu et al.
APPLIED THERMAL ENGINEERING (2020)
The impact of thermophysical properties and hysteresis effects on the energy performance simulation of PCM wallboards: Experimental studies, modelling, and validation
Annamaria Buonomano et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Numerical and experimental investigations of latent thermal energy storage device based on a flat micro-heat pipe array-metal foam composite structure
L. Liang et al.
RENEWABLE ENERGY (2020)
Application of phase change material foam composites in the built environment: A critical review
Charles A. Ikutegbe et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Graphite foam infiltration with mixed chloride salts as PCM for high-temperature latent heat storage applications
Hao Lan et al.
SOLAR ENERGY (2020)
Heating and cooling conditions effects on the kinetic of phase change of PCM embedded in metal foam
Mohamed Moussa El Idi et al.
CASE STUDIES IN THERMAL ENGINEERING (2020)
PCM-Based Energy Storage System with High Power Output Using Open Porous Aluminum Foams
Joachim Baumeister et al.
ENERGIES (2020)
Filling copper foam partly on thermal behavior of phase-change material in a rectangular enclosure
Xi Meng et al.
JOURNAL OF ENERGY STORAGE (2020)
Nanoparticles and metal foams for heat transfer enhancement of phase change materials: A comparative experimental study
Hossein Senobar et al.
JOURNAL OF ENERGY STORAGE (2020)
Phase change material/heat pipe and Copper foam-based heat sinks for thermal management of electronic systems
Muhammad Aamer Hayat et al.
JOURNAL OF ENERGY STORAGE (2020)
Effect of porosity and pore density of copper foam on thermal performance of the paraffin-copper foam composite Phase-Change Material
Xi Meng et al.
CASE STUDIES IN THERMAL ENGINEERING (2020)
Enhancing PV Cell's electrical efficiency using phase change material with copper foam matrix and multi-walled carbon nanotubes as passive cooling method
Abdulmunem R. Abdulmunem et al.
RENEWABLE ENERGY (2020)
A phase change/metal foam heatsink for thermal management of battery packs
Ali Veismoradi et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)
ENHANCEMENT OF GALLIUM PHASE-CHANGE HEAT TRANSFER BY COPPER FOAM AND ULTRASONIC VIBRATION
Zirui Xu et al.
JOURNAL OF ENHANCED HEAT TRANSFER (2020)
Knitting aryl network polymers (KAPs)-embedded copper foam enables highly efficient thermal energy storage
Changhui Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage-A review
Malik Muhammad Umair et al.
APPLIED ENERGY (2019)
Charging nanoparticle enhanced bio-based PCM in open cell metallic foams: An experimental investigation
M. Al-Jethelah et al.
APPLIED THERMAL ENGINEERING (2019)
Pore-scale numerical simulation of the thermal performance for phase change material embedded in metal foam with cubic periodic cell structure
Xusheng Hu et al.
APPLIED THERMAL ENGINEERING (2019)
Enhancement of phase change rate of PCM in cylindrical thermal energy storage
Adel Pourakabar et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental investigation of thermal conductivity enhancement of carbon foam saturated with PCM and PCM/MWCNTs composite for energy storage systems
S. A. Nada et al.
HEAT AND MASS TRANSFER (2019)
X-ray tomography and modelling study on the mechanical behaviour and performance of metal foam flow-fields for polymer electrolyte fuel cells
A. Fly et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid
Hossein Arasteh et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
Modeling of solar energy systems using artificial neural network: A comprehensive review
Ammar H. Elsheikh et al.
SOLAR ENERGY (2019)
Effect of different dimensional carbon materials on the properties and application of phase change materials: A review
Min Li et al.
APPLIED ENERGY (2019)
Role of porous metal foam on the heat transfer enhancement for a thermal energy storage tube
Xiaohu Yang et al.
APPLIED ENERGY (2019)
Effect of foam geometry on heat absorption characteristics of PCM-metal foam composite thermal energy storage systems
Battula Venkata Sai Dinesh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Constructal enhancement of thermal transport in metal foam-PCM composite-assisted latent heat thermal energy storage system
Varun Joshi et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2019)
Influence of Pore Density and Porosity on the Melting Process of Bio-Based Nano-Phase Change Materials Inside Open-Cell Metal Foam
Kumar Venkateshwar et al.
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2019)
A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams
Tauseef-ur-Rehman et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
A novel hybrid thermal management for Li-ion batteries using phase change materials embedded in copper foams combined with forced-air convection
Mehdi Mehrabi-Kermani et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Thermal response of annuli filled with metal foam for thermal energy storage: An experimental study
Xiaohu Yang et al.
APPLIED ENERGY (2019)
Numerical study on latent thermal energy storage systems with aluminum foam in local thermal equilibrium
Bernardo Buonomo et al.
APPLIED THERMAL ENGINEERING (2019)
Thermal Performance of a PCM-Based Thermal Energy Storage with Metal Foam Enhancement
Xue Chen et al.
ENERGIES (2019)
Thermal conductivity enhancement of hydrated salt phase change materials employing copper foam as the supporting material
Qiangqiang Xiao et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
A three-dimensional pore-scale lattice Boltzmann model for investigating the supergravity effects on charging process
Xinyi Li et al.
APPLIED ENERGY (2019)
Experimental characterisation of a novel thermal energy storage based on open-cell copper foams immersed in organic phase change material
Raffaello Cozzolino et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Transient melting of paraffin waxes embedded in aluminum foams: Experimental results and modeling
Andrea Diani et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Transient heat transfer analysis in packed beds: Entropy generation model and multi-objective optimization
Ma XiaoTeng et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2019)
Form-Stable Solar Thermal Heat Packs Prepared by Impregnating Phase-Changing Materials within Carbon-Coated Copper Foams
Qinxian Ye et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Numerical simulation of effective thermal conductivity and pore-scale melting process of PCMs in foam metals
Gang Wang et al.
APPLIED THERMAL ENGINEERING (2019)
Transient heat transfer and non-isothermal particle-laden gas flows through porous metal foams of differing structure
S. T. W. Kuruneru et al.
APPLIED THERMAL ENGINEERING (2019)
Lattice Boltzmann Simulation on Droplet Flow through 3D Metal Foam
Jian Zhang et al.
PROCESSES (2019)
Analysis of a phase change material-based unit and of an aluminum foam/phase change material composite-based unit for cold thermal energy storage by numerical simulation
Martina Caliano et al.
APPLIED ENERGY (2019)
Preparation of a novel composite phase change material (PCM) and its locally enhanced heat transfer for power battery module
Deqiu Zou et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Thermal performance of a cylindrical battery module impregnated with PCM composite based on thermoelectric cooling
Le Jiang et al.
ENERGY (2019)
Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source
Pouyan Talebizadeh Sardari et al.
ENERGY (2019)
Composite metal foam/PCM energy store design for dwelling space air heating
Pouyan Talebizadeh Sardari et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Thin film technology for solar steam generation: A new dawn
Ammar H. Elsheikh et al.
SOLAR ENERGY (2019)
Numerical Simulation of Gas/Solid Heat Transfer in Metallic Foams: A General Correlation for Different Porosities and Pore Sizes
Azade Jafarizade et al.
TRANSPORT IN POROUS MEDIA (2019)
Photovoltaic panel integrated with phase change materials (PV-PCM): technology overview and materials selection
Tao Ma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
The influence of channels per square inch on the freezing progress of the square copper column array water composite PCM
Zhaolei Ding et al.
JOURNAL OF ENERGY STORAGE (2019)
Experimental and numerical study on the thermal behavior of phase change material infiltrated in low porosity metal foam
Xusheng Hu et al.
JOURNAL OF ENERGY STORAGE (2019)
Development of heat accumulation unit based on heterogeneous structure of MF/PCM for cogeneration units
Radim Rybar et al.
JOURNAL OF ENERGY STORAGE (2019)
Effect of supergravity on heat transfer characteristics of PCM with the pore-scale lattice Boltzmann method
Xinyi Li et al.
INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)
A STUDY ON NUMERICAL DETERMINATION OF PERMEABILITY AND INERTIA COEFFICIENT OF ALUMINUM FOAM USING X-RAY MICROTOMOGRAPHY TECHNIQUE: FOCUS ON INSPECTION METHODS FOR RELIABILITY (PERMEABILITY AND INERTIA COEFFICIENT BY TOMOGRAPHY)
Hasan Celik et al.
JOURNAL OF POROUS MEDIA (2019)
Pore-scale investigation of gravity effects on phase change heat transfer characteristics using lattice Boltzmann method
Xinyi Li et al.
APPLIED ENERGY (2018)
Transient performance of a PCM-based heat sink with a partially filled metal foam: Effects of the filling height ratio
Zi-Qin Zhu et al.
APPLIED THERMAL ENGINEERING (2018)
Phase-change materials (PCM) for automotive applications: A review
Joris Jaguemont et al.
APPLIED THERMAL ENGINEERING (2018)
Melting and solidification of PCM embedded in porous metal foam in horizontal multi-tube heat storage system
Mehdi Esapour et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Thermal performance of copper foam/paraffin composite phase change material
Huanpei Zheng et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Numerical investigation of the effects of a copper foam filled with phase change materials in a water-cooled photovoltaic/thermal system
Soroush Mousavi et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
A comparative study of PCM melting process in a heat pipe-assisted LHTES unit enhanced with nanoparticles and metal foams by immersed boundary-lattice Boltzmann method at pore-scale
Qinlong Ren et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Numerical simulation of natural convection in open-cells metal foams
D. Chiappini
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Thermal management of lithium ion batteries using graphene coated nickel foam saturated with phase change materials
Abid Hussain et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)
Coupled lattice Boltzmann finite volume method for conjugate heat transfer in porous media
D. Chiappini et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2018)
Melting process in porous media around two hot cylinders: Numerical study using the lattice Boltzmann method
Mahmoud Jourabian et al.
PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2018)
Applications of nanofluids in solar energy: A review of recent advances
A. H. Elsheikh et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage
Yaxue Lin et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
A review of phase change material and performance enhancement method for latent heat storage system
Y. B. Tao et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Development and prototype testing of MgCl2/graphite foam latent heat thermal energy storage system
Dileep Singh et al.
SOLAR ENERGY (2018)
Numerical study of pore-scale flow and noise of an open cell metal foam
Chen Xu et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2018)
Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling
Tauseef-ur-Rehman et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)
Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems
Tauseef-ur-Rehman et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
A numerical study on determination of volume averaged thermal transport properties of metal foam structures using X-ray microtomography technique
Hasan Celik et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2018)
Multiple-segment metal foam application in the shell-and-tube PCM thermal energy storage system
Jasim M. Mahdi et al.
JOURNAL OF ENERGY STORAGE (2018)
Numerical Study of Latent Heat Thermal Energy Storage Enhancement by Nano-PCM in Aluminum Foam
Bernardo Buonomo et al.
INVENTIONS (2018)
EXPERIMENTAL ANALYSIS OF THE MELTING PROCESS IN A PCM/ALUMINUM FOAM COMPOSITE MATERIAL IN HYPERGRAVITY CONDITIONS
Sauro Filippeschi et al.
INTERFACIAL PHENOMENA AND HEAT TRANSFER (2018)
Numerical investigation on a Heat Exchanger in Aluminum Foam
Bernardo Buonomo et al.
ATI 2018 - 73RD CONFERENCE OF THE ITALIAN THERMAL MACHINES ENGINEERING ASSOCIATION (2018)
Numerical and Experimental Studies on the Heat Transfer Performance of Copper Foam Filled with Paraffin
Huanpei Zheng et al.
ENERGIES (2017)
The lattice Boltzmann modeling on the nanofluid natural convective transport in a cavity filled with a porous foam
Huijin Xu et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)
A coupled finite volume & discrete element method to examine particulate foulant transport in metal foam heat exchangers
Sahan T. W. Kuruneru et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Numerical simulation of flow and heat transfer in composite PCM on the basis of two different models of open-cell metal foam skeletons
Zhuqian Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
A novel lattice Boltzmann model for the solid-liquid phase change with the convection heat transfer in the porous media
Wei Wu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Experimental investigation on copper foam/hydrated salt composite phase change material for thermal energy storage
T. X. Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
A pore-scale visualized study of melting heat transfer of a paraffin wax saturated in a copper foam: Effects of the pore size
Hong-Qing Jin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Simulation and analytical validation of forced convection inside open cell metal foams
H. Liu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)
Numerical investigations on convective heat transfer enhancement in jet impingement due to the presence of porous media using Cascaded Lattice Boltzmann method
Chinige Sampath Kumar et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)
LATTICE BOLTZMANN SIMULATION OF HEAT TRANSFER ENHANCEMENT IN AN ASYMMETRICALLY HEATED CHANNEL FILLED WITH RANDOM POROUS MEDIA
Mohammad Abbaszadeh et al.
JOURNAL OF POROUS MEDIA (2017)
Investigation of the effect of metal foam characteristics on the PCM melting performance in a latent heat thermal energy storage unit by pore-scale lattice Boltzmann modeling
Qinlong Ren et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2017)
Generation and validation of virtual nonwoven, foam and knitted filter (separator/coalescer) geometries for CFD simulations
S. Abishek et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2017)
Graphite foam as interpenetrating matrices for phase change paraffin wax: A candidate composite for low temperature thermal energy storage
Mani Karthik et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
A new strategy for enhanced latent heat energy storage with microencapsulated phase change material saturated in metal foam
Wengiang Li et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Thermal properties and thermal conductivity enhancement of composite phase change materials using myristyl alcohol/metal foam for solar thermal storage
Xiang Huang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Pore-Scale Numerical Investigation of Pressure Drop Behaviour Across Open-Cell Metal Foams
T. P. de Carvalho et al.
TRANSPORT IN POROUS MEDIA (2017)
Accelerated melting of PCM in a multitube annulus-type thermal storage unit using lattice Boltzmann simulation
Mahmoud Jourabian et al.
HEAT TRANSFER-ASIAN RESEARCH (2017)
Analysis of particle-laden fluid flows, tortuosity and particle-fluid behaviour in metal foam heat exchangers
Sahan T. W. Kuruneru et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Numerical analysis on the energy storage efficiency of phase change material embedded in finned metal foam with graded porosity
Feng Zhu et al.
APPLIED THERMAL ENGINEERING (2017)
Lattice Boltzmann modeling of melting of phase change materials in porous media with conducting fins
Dongyan Gao et al.
APPLIED THERMAL ENGINEERING (2017)
Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combination
Jasim M. Mahdi et al.
APPLIED ENERGY (2017)
Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media
Yang Xu et al.
APPLIED ENERGY (2017)
Effect of an increased thermal contact resistance in a salt PCM-graphite foam composite TES system
P. Gimenez et al.
RENEWABLE ENERGY (2017)
Three-dimensional numerical study on solid-liquid phase change within open-celled aluminum foam with porosity gradient
Zhuqian Zhang et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical model of dehumidifying process of wet air flow in open-cell metal foam
Haitao Hu et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental and numerical investigation of a tube-in-tank latent thermal energy storage unit using composite PCM
Z. N. Meng et al.
APPLIED ENERGY (2017)
Melting heat transfer characteristics of a composite phase change material fabricated by paraffin and metal foam
P. Zhang et al.
APPLIED ENERGY (2017)
Thermal energy storage and retrieval characteristics of a molten-salt latent heat thermal energy storage system
P. Zhang et al.
APPLIED ENERGY (2016)
Experimental study on enhancement of thermal energy storage with phase-change material
Jialin Yang et al.
APPLIED ENERGY (2016)
Experimental investigation on the thermal performance of a heat sink filled with porous metal fiber sintered felt/paraffin composite phase change material
Hongfei Wang et al.
APPLIED ENERGY (2016)
Numerical investigation of the temporal evolution of particulate fouling in metal foams for air-cooled heat exchangers
Sahan Trushad Wickramasooriya Kuruneru et al.
APPLIED ENERGY (2016)
A review of the composite phase change materials: Fabrication, characterization, mathematical modeling and application to performance enhancement
P. Zhang et al.
APPLIED ENERGY (2016)
Lattice Boltzmann simulation on phase change heat transfer in metal foams/paraffin composite phase change material
Y. B. Tao et al.
APPLIED THERMAL ENGINEERING (2016)
Experimental study of a phase change thermal energy storage with copper foam
Matthieu Martinelli et al.
APPLIED THERMAL ENGINEERING (2016)
Heat transfer performance of structured catalytic reactors packed with metal foam supports: Influence of wall coupling
S. Razza et al.
CATALYSIS TODAY (2016)
Experimental investigation of a passive thermal management system for high-powered lithium ion batteries using nickel foam-paraffin composite
Abid Hussain et al.
ENERGY (2016)
Lattice Boltzmann direct numerical simulation of interface turbulence over porous and rough walls
Y. Kuwata et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2016)
Effect of porosity of conducting matrix on a phase change energy storage device
Aditya Atal et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Effect of ligament hollowness on heat transfer characteristics of open-cell metal foam
Chanhee Moon et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
A study on using metal foam as coolant fluid distributor in the polymer electrolyte membrane fuel cell
Ebrahim Afshari et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Development of graphite foam infiltrated with MgCl2 for a latent heat based thermal energy storage (LHTES) system
Dileep Singh et al.
RENEWABLE ENERGY (2016)
Heat transfer enhancement of phase change composite material: Copper foam/paraffin
Changhong Wang et al.
RENEWABLE ENERGY (2016)
Metal foam embedded in SEBS/paraffin/HDPE form-stable PCMs for thermal energy storage
Peng Chen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Heat transfer enhancement of PCM melting in 2D horizontal elliptical tube using metallic porous matrix
Mahmoud Jourabian et al.
THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS (2016)
Simulation of Solid-Liquid Phase Transition Process in Aluminum Foams Using the Lattice Boltzmann Method
Xinpeng Huang et al.
INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY (2016)
Thermal Behaviors of Latent Thermal Energy Storage System with PCM and Aluminum Foam
Bernardo Buonomo et al.
INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY (2016)
Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery
Zichen Wang et al.
APPLIED THERMAL ENGINEERING (2015)
Buoyancy driven convection in open-cell metal foam using the volume averaging theory
Sven De Schampheleire et al.
APPLIED THERMAL ENGINEERING (2015)
Microtomography-based numerical simulation of fluid flow and heat transfer in open cell metal foams
Mohammad Zafari et al.
APPLIED THERMAL ENGINEERING (2015)
Preparation of erythritol-graphite foam phase change composite with enhanced thermal conductivity for thermal energy storage applications
M. Karthik et al.
CARBON (2015)
Numerical simulation of heat transfer in the near-wall region of tubular reactors packed with metal open-cell foams
Enrico Bianchi et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Developments in organic solid-liquid phase change materials and their applications in thermal energy storage
R. K. Sharma et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Comparison of metal foam heat exchangers to a finned heat exchanger for low Reynolds number applications
Henk Huisseune et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit
Evan Fleming et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Numerical analysis on thermal behavior of solid-liquid phase change within copper foam with varying porosity
Jialin Yang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Numerical investigation of pressure drop and heat transfer through reconstructed metal foams and comparison against experiments
Andrea Diani et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Investigation of a graphite/paraffin phase change composite
Albouchi Fethi et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
Experimental analysis of phase change phenomenon of paraffin waxes embedded in copper foams
Simone Mancin et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
Heat Transfer and Pressure Drop Characteristics of Finned Metal Foam Heat Sinks Under Uniform Impinging Flow
S. S. Feng et al.
JOURNAL OF ELECTRONIC PACKAGING (2015)
The Numerical Simulation of Liquid-Vapor Stratified Flow in Horizontal Metal-Foam Tubes
Jingxuan Wang et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2015)
Thermal management improvement of an air-cooled high-power lithium-ion battery by embedding metal foam
Shahabeddin K. Mohammadian et al.
JOURNAL OF POWER SOURCES (2015)
An investigation of lithium-ion battery thermal management using paraffin/porous-graphite-matrix composite
Angelo Greco et al.
JOURNAL OF POWER SOURCES (2015)
Graphite Foam Infused with Pentaglycerine for Solid-State Thermal Energy Storage
Douglas J. Johnson et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2015)
ANALYSIS AND CHARACTERIZATION OF METAL FOAM-FILLED DOUBLE-PIPE HEAT EXCHANGERS
Xi Chen et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2015)
Combining thermal energy storage with buildings - a review
Johan Heier et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Graphene-nickel/n-carboxylic acids composites as form-stable phase change materials for thermal energy storage
Weidong Liang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Experimental and numerical study of heat transfer characteristics of a paraffin/metal foam composite PCM
Peng Zhang et al.
CLEAN, EFFICIENT AND AFFORDABLE ENERGY FOR A SUSTAINABLE FUTURE (2015)
The effect of pore size and porosity on thermal management performance of phase change material infiltrated microcellular metal foams
Sriharsha S. Sundarram et al.
APPLIED THERMAL ENGINEERING (2014)
Correlation studies of hydrodynamics and heat transfer in metal foam heat exchangers
Shaolin Mao et al.
APPLIED THERMAL ENGINEERING (2014)
High resolution microtomography-based CFD simulation of flow and heat transfer in aluminum metal foams
Paola Ranut et al.
APPLIED THERMAL ENGINEERING (2014)
Structural and mechanical characterization of graphite foam/phase change material composites
Vladimir Canseco et al.
CARBON (2014)
Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage
Hengxing Ji et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Mixed-convection flow of Al2O3-H2O nanofluid in a channel partially filled with porous metal foam: Experimental and numerical study
Mastaneh Hajipour et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)
An experimental and numerical study of finned metal foam heat sinks under impinging air jet cooling
S. S. Feng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
A thermal lattice Boltzmann model for natural convection in porous media under local thermal non-equilibrium conditions
Dongyan Gao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Experimental and numerical study on melting of phase change materials in metal foams at pore scale
Zhenqian Chen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material
Z. G. Qu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Forced convection inside metal foam: Simulation over a long domain and analytical validation
Ahmed S. Suleiman et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)
Effective thermal conductivity of open-cell metal foams' impregnated with pure paraffin for latent heat storage
X. Xiao et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)
Computational Studies on Metal Foam and Heat Pipe Enhanced Latent Thermal Energy Storage
K. Nithyanandam et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2014)
Influence of Nanoparticles and Graphite Foam on the Supercooling of Acetamide
Jia Yu et al.
JOURNAL OF NANOMATERIALS (2014)
Experimental study of a passive thermal management system for high-powered lithium ion batteries using porous metal foam saturated with phase change materials
W. Q. Li et al.
JOURNAL OF POWER SOURCES (2014)
Long-domain simulation of flow in open-cell mesoporous metal foam and direct comparison to experiment
Ahmed S. Suleiman et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2014)
NUMERICAL INVESTIGATION OF PCM BASED HEAT SINKS WITH EMBEDDED METAL FOAM/CROSSED PLATE FINS
P. V. S. S. Srivatsa et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2014)
Phase change materials for thermal energy storage
Kinga Pielichowska et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Heat transfer analysis of a latent heat thermal energy storage system using graphite foam for concentrated solar power
Taeil Kim et al.
SOLAR ENERGY (2014)
Simulation of Entry-Region Flow in Open-Cell Metal Foam and Experimental Validation
Nihad Dukhan et al.
TRANSPORT IN POROUS MEDIA (2014)
Fluid Flow and Heat Transfer in a Novel Microchannel Heat Sink Partially Filled With Metal Foam Medium
E. Farsad et al.
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2014)
Numerical modeling for solid-liquid phase change phenomena in porous media: Shell-and-tube type latent heat thermal energy storage
Zhenyu Liu et al.
APPLIED ENERGY (2013)
Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams
P. Wang et al.
APPLIED ENERGY (2013)
Preparation and thermal characterization of paraffin/metal foam composite phase change material
X. Xiao et al.
APPLIED ENERGY (2013)
A review of solar collectors and thermal energy storage in solar thermal applications
Y. Tian et al.
APPLIED ENERGY (2013)
Thermal conductivity improvement of phase change materials/graphite foam composites
Mahmoud Moeini Sedeh et al.
CARBON (2013)
Heat transfer properties of metal foam supports for structured catalysts: Wall heat transfer coefficient
Enrico Bianchil et al.
CATALYSIS TODAY (2013)
Experimental investigations on thermal performance enhancement and effect of orientation on porous matrix filled PCM based heat sink
Rajesh Baby et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)
Thermal and exergetic analysis of Metal Foam-enhanced Cascaded Thermal Energy Storage (MF-CTES)
Y. Tian et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Development of Methods to Fully Saturate Carbon Foam With Paraffin Wax Phase Change Material for Energy Storage
Ron Warzoha et al.
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Phase change material (PCM) storage for free cooling of buildings-A review
Adeel Waqas et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Numerical analysis on the thermal behavior of high temperature latent heat thermal energy storage system
Jialin Yang et al.
SOLAR ENERGY (2013)
Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin
W. Q. Li et al.
APPLIED THERMAL ENGINEERING (2012)
Phase change composite based on porous nickel and erythritol
Teppei Oya et al.
APPLIED THERMAL ENGINEERING (2012)
Experimental investigation on the heat charging process by paraffin filled with high porosity copper foam
H. T. Cui
APPLIED THERMAL ENGINEERING (2012)
Passive thermal management using metal foam saturated with phase change material in a heat sink
Z. G. Qu et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2012)
Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials
D. Zhou et al.
APPLIED THERMAL ENGINEERING (2011)
A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals
Y. Tian et al.
ENERGY (2011)
Experimental and numerical study of single and two-phase flow and heat transfer in aluminum foams
H. Y. Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
Numerical simulation of convective heat transfer between air flow and ceramic foams to optimise volumetric solar air receiver performances
Zhiyong Wu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
Analytical and numerical prediction of heat transfer and pressure drop in open-cell metal foams
Mo Bai et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)
A direct comparison of three different material enhancement methods on the transient thermal response of paraffin phase change material exposed to high heat fluxes
Kireeti Chintakrinda et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)
Lattice Boltzmann simulation of natural convection dominated melting in a rectangular cavity filled with porous media
Dongyan Gao et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)
Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite
C. Y. Zhao et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Experimental and numerical studies of the pressure drop in ceramic foams for volumetric solar receiver applications
Zhiyong Wu et al.
APPLIED ENERGY (2010)
Heat transfer performance analysis of a solar flat-plate collector with an integrated metal foam porous structure filled with paraffin
Zhenqian Chen et al.
APPLIED THERMAL ENGINEERING (2010)
Study on fluid-solid coupling heat transfer in fractal porous medium by lattice Boltzmann method
Jun Cai et al.
APPLIED THERMAL ENGINEERING (2010)
Numerical study of natural convection in porous media (metals) using Lattice Boltzmann Method (LBM)
C. Y. Zhao et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2010)
Numerical study of conjugated heat transfer in metal foam filled double-pipe
Y. P. Du et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
3D numerical simulation of flow and conjugate heat transfer through a pore scale model of high porosity open cell metal foam
A. Kopanidis et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
Lattice Boltzmann 3D flow simulations on a metallic foam
Djomice Beugre et al.
JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS (2010)
Numerical Analysis of Convective Heat Transfer From an Elliptic Pin Fin Heat Sink With and Without Metal Foam Insert
Hamid Reza Seyf et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)
MICROTOMOGRAPHY-BASED SIMULATION OF TRANSPORT THROUGH OPEN-CELL METAL FOAMS
Karthik K. Bodla et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2010)
Study on the melting process of phase change materials in metal foams using lattice Boltzmann method
Gao DongYan et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2010)
Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)
C. Y. Zhao et al.
SOLAR ENERGY (2010)
Heat transfer enhancement of paraffin wax using graphite foam for thermal energy storage
Yajuan Zhong et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Preliminary Study of Passive Cooling Strategy Using a Combination of PCM and Copper Foam to Increase Thermal Heat Storage in Building Facade
Mohd Hafizal Mohd Isa et al.
Sustainability (2010)
Phase distribution measurements in metallic foam packing using X-ray radiography and micro-tomography
S. Calvo et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2009)
Hydrogen storage in metal hydride tanks equipped with metal foam heat exchanger
S. Mellouli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Modeling Forced Convection in Finned Metal Foam Heat Sinks
Christopher T. DeGroot et al.
JOURNAL OF ELECTRONIC PACKAGING (2009)
Review on thermal energy storage with phase change materials and applications
Atul Sharma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
Graphite foams infiltrated with phase change materials as alternative materials for space and terrestrial thermal energy storage applications
K. Lafdi et al.
CARBON (2008)
Tomography based determination of permeability, Dupuit-Forchheimer coefficient, and interfacial heat transfer coefficient in reticulate porous ceramics
Jorg Petrasch et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2008)
Modeling and prediction of the effective thermal conductivity of random open-cell porous foams
Moran Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)
Simulation of thermal transport in open-cell metal foams: Effect of periodic unit-cell structure
Shankar Krishnan et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2008)
Phase change heat transfer enhancement using copper porous foam
Ali Siahpush et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2008)
Experimental study on the influence of foam porosity and pore size on the melting of phase change materials
K. Lafdi et al.
JOURNAL OF APPLIED PHYSICS (2007)
Simulation of heat transfer in a metal hydride reactor with aluminium foam
F. Laurencelle et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Convective heat transfer in open cell metal foams
Ken I. Salas et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2007)
Forced convection heat transfer and hydraulic losses in graphitic foam
A. G. Straatman et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2007)
Effects of surface area density of aluminum foams on thermal conductivity of aluminum foam-phase change material composites
Sung-Tae Hong et al.
ADVANCED ENGINEERING MATERIALS (2007)
Response of actively cooled metal foam sandwich panels exposed to thermal loading
Jeseph F. Rakow et al.
AIAA JOURNAL (2007)
Three-dimensional effect on the effective thermal conductivity of porous media
Moran Wang et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2007)
Interstitial heat transfer coefficient and dispersion conductivity in compressed metal foam heat sinks
Sheng-Chung Tzeng et al.
JOURNAL OF ELECTRONIC PACKAGING (2007)
Open-cell aluminum foams filled with phase change materials as compact heat sinks
Sung-Tae Hong et al.
SCRIPTA MATERIALIA (2006)
Direct simulation of transport in open-cell metal foam
Shankar Krishnan et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)
Numerical study of confined slot jet impinging on porous metallic foam heat sink
TM Jeng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
A two-temperature model for solid-liquid phase change in metal foams
S Krishnan et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2005)
Thermal transport in high porosity cellular metal foams
CY Zhao et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2004)
Application to natural convection enclosed flows of a lattice Boltzmann BGK model coupled with a general purpose thermal boundary condition
A D'Orazio et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2004)
Simulations of flow through open cell metal foams using an idealized periodic cell structure
K Boomsma et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2003)
Review on thermal energy storage with phase change:: materials, heat transfer analysis and applications
B Zalba et al.
APPLIED THERMAL ENGINEERING (2003)
Non-Darcy natural convection in high porosity metal foams
MS Phanikumar et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material
X Py et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)
Forced convection in high porosity metal foams
VV Calmidi et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2000)