AltPrint: new filling and slicing process planning based on deposited material with geometry variation

Article Engineering, Mechanical

Curved layer path planning on a 5-axis 3D printer

Joao Duarte et al.

Summary: This paper presents an approach to curved layer path planning on a 5-axis printer, utilizing two additional printer degrees of freedom to provide a curved layer path planning strategy.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Volumetric adaptive slicing of manifold mesh for rapid prototyping based on relative volume error

Qianyong Chen et al.

Summary: This paper proposes a RVE-based adaptive slicing method to improve the surface quality of parts in additive manufacturing. Through verification on three manifold models, it was found that the proposed method can enhance the standard deviations of RVE and improve the surface roughness of parts.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Mechanical

A novel adaptive slicing algorithm based on ameliorative area ratio and accurate cusp height for 3D printing

Yifei Hu et al.

Summary: The study introduces a new adaptive slicing method for 3D printing, which reduces the number of layers while keeping the geometric error within a given threshold through improved area ratio and accurate cusp height. This method shows promising results and feasibility in the field of three-dimensional printing.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Development of a deposition framework for implementation of a region-based adaptive slicing strategy in arc-based metal additive manufacturing

Nitish P. Gokhale et al.

Summary: This study develops and demonstrates a deposition framework for implementing a novel region-based adaptive slicing strategy for Tungsten Inert Gas (TIG) welding-based additive manufacturing system. The framework was developed through experiments and analysis to integrate customization in the process, and was demonstrated on the hardware level. The study showcases a new way of implementing the region-based adaptive slicing strategy for arc-based metal additive manufacturing.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Review Engineering, Environmental

Future of additive manufacturing: Overview of 4D and 3D printed smart and advanced materials and their applications

Kirstie R. Ryan et al.

Summary: 4D printing is a developing field in additive manufacturing that utilizes time responsive programmable materials to create dynamic structures for a variety of applications. The use of multifunctional materials in 4D printing offers solutions for challenging environments where human intervention is not possible, such as outer space and extreme weather conditions. This technology has the potential to advance health monitoring, electrical devices, deployable structures, soft robotics, and tuneable metamaterials.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

CONVEX (CONtinuously Varied EXtrusion): A new scale of design for additive manufacturing

Amirpasha Moetazedian et al.

Summary: The CONVEX design approach breaks free from traditional 3D printing by using continuously varying extrusion widths to improve part quality, with applications across a variety of fields.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of the angle of the laid-up filaments on the surfaces on the coefficient of static friction between parts manufactured by extrusion-based 3D printing

Leonardo Santana et al.

Summary: Three-dimensional printers, particularly extrusion-based ones, are driving a global revolution in academia, industry, and society. Research shows that the static coefficient of friction between printed parts is influenced by the angle of the filaments, with combinations of different angles decreasing the coefficient.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A big data-driven framework for sustainable and smart additive manufacturing

Arfan Majeed et al.

Summary: The paper presents the development and application of the sustainable and smart additive manufacturing (SSAM) framework, aiming to improve the production efficiency and sustainability of additive manufacturing enterprises. By combining big data analytics, additive manufacturing, and sustainable smart manufacturing technologies, energy consumption and product quality are effectively controlled.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Processing parameter correlations in material extrusion additive manufacturing

Daniel J. Braconnier et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Mechanical

Mechanical, thermal, melt-flow and morphological characterizations of bentonite-filled ABS copolymer

Laylay Mustafa Alhallak et al.

RAPID PROTOTYPING JOURNAL (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Layer-by-layer generation of optimized joint trajectory for multi-axis robotized additive manufacturing of parts of revolution

Maxime Chalvin et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Thermomechanical characterization of short carbon fiber and short glass fiber-reinforced ABS used in large format additive manufacturing

Kazi Md Masum Billah et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Review Engineering, Manufacturing

Additive manufacturing of metamaterials: A review

Meisam Askari et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review

Jianjun Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Aerospace

Out-of-plane and in-plane compression of additively manufactured auxetic structures

Amer Alomarah et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

The effect of raster orientation on the static and fatigue properties of filament deposited ABS polymer

Natalie S. F. Jap et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

添加到收藏夹

Article Engineering, Manufacturing

The m4 3D printer: A multi-material multi-method additive manufacturing platform for future 3D printed structures

Devin J. Roach et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Review Engineering, Manufacturing

Additive manufacturing in construction: A review on processes, applications, and digital planning methods

Alexander Paolini et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Proceedings Paper Computer Science, Artificial Intelligence

Methodology for design process of a snap-fit joint made by additive manufacturing

Emilio A. Ramirez et al.

12TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid

Shahriar Bakrani Balani et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Optimization of Build Time and Support Material Quantity for the Additive Manufacturing of Non-Assembly Mechanisms

Martin Hallmann et al.

29TH CIRP DESIGN CONFERENCE 2019 (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additively-manufactured lightweight Metamaterials for energy absorption

Mehrdad Mohsenizadeh et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Chemistry, Physical

Investigation of Fatigue Behavior of ABS and PC-ABS Polymers at Different Temperatures

Andrea Mura et al.

MATERIALS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Process-structure-property effects on ABS bond strength in fused filament fabrication

A. C. Abbott et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study of parametric calibration for low cost 3D printing: Seeking improvement in dimensional quality

Leonardo Santana et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Fatigue Characteristics of 3D Printed Acrylonitrile Butadiene Styrene (ABS)

M. M. Padzi et al.

2017 4TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS, MECHANICS AND STRUCTURAL ENGINEERING (4TH AMMSE 2017) (2017)

添加到收藏夹

Article Engineering, Manufacturing

The impact of print orientation and raster pattern on fracture toughness in additively manufactured ABS

Tait D. McLouth et al.

ADDITIVE MANUFACTURING (2017)

添加到收藏夹

Article Engineering, Mechanical

A study on revolute joints in 3D-printed non-assembly mechanisms

Xiangzhi Wei et al.

RAPID PROTOTYPING JOURNAL (2016)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Design Guidelines for Additive Manufactured Snap-Fit Joints

Christoph Klahn et al.

26TH CIRP DESIGN CONFERENCE (2016)

添加到收藏夹

Article Engineering, Industrial

Topological optimization of internal patterns and support in additive manufacturing

Nicolas Gardan et al.

JOURNAL OF MANUFACTURING SYSTEMS (2015)

添加到收藏夹

Proceedings Paper Physics, Applied

Additive Manufacturing in Production: a Study Case Applying Technical Requirements

Inigo Flores Ituarte et al.

15TH NORDIC LASER MATERIALS PROCESSING CONFERENCE, NOLAMP 15 (2015)

添加到收藏夹

AltPrint: new filling and slicing process planning based on deposited material with geometry variation

相关参考文献

导出引文

分享论文