A model-based method of tire-road friction estimation for articulated steering vehicles

Articulated steering vehicles (ASV) are widely used in many industries for their high efficiency and excellent maneuverability. The autonomous driving and intelligent control of ASV are extremely critical owing to the operation characteristics. As a very important parameter, the tire-road friction coefficient (TRFC) determines the extreme tire force directly in the process of intelligent control. However, it cannot be obtained with the existing methods for the harsh environment and special structure of ASV. This paper proposed a two-layer model-based method of tire-road friction coefficient estimation for ASV. The dynamic models of ASV in the XY plane, including the longitudinal and lateral models of frames, tire forces, and steering system models, are established first. The dynamic models are embedded into the upper layer with a Kalman filter (KF) to estimate the tire forces in longitudinal and lateral directions. During the process, some self-contained sensors, including the state sensors of frames and steering system, are used to provide the observation data. In the lower layer, a recursive least square (RLS) method with a forgetting factor is used to obtain the TRFC and tire stiffness parameters with the aid of the tire model. The simulation and field test are carried out to validate the method under comprehensive conditions, in which different steering commands, velocities, and roads are included. The simulation and field test results show that the forgetting factor has a significant influence on the convergence and robustness of the proposed method. The forgetting factor tau = 0.95 is used in the field test, the estimation result of dry concrete road friction coefficient is around 0.83. The results indicated that the proposed method can obtain the TRFC and tire parameters dynamically for ASVs.

Automated summary

This paper proposes a two-layer model-based method for estimating the tire-road friction coefficient for ASVs. The method utilizes dynamic models and sensor data fusion to dynamically obtain the friction coefficient and tire parameters for ASVs.