☆ 4.5 Article

The role of roughness parameters in grading the machined surface quality in Ti-alloys

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Digital representation of the wear behaviour of Ti-6Al-4V and Ti-6Al-7Nb biomaterial alloys: A fractal analysis of the worn surface

Joao Almeida et al.

Summary: Currently, Ti-6Al-4V alloy is widely used in biomedical devices but its toxicity due to vanadium ions has led to efforts to find less toxic alternatives, such as Ti-6Al-7Nb alloy. The surface properties and tribological performance of the Ti-6Al-7Nb alloy are of great importance for its biomedical applications. This study investigates the fractal behavior of worn surfaces of both Ti-6Al-4V and Ti-6Al-7Nb samples through tribological tests and surface inspection methodologies.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2023)

添加到收藏夹

Article Engineering, Manufacturing

Development of a surface engineering strategy to quantify the sensitivity of surface integrity features in fatigue performance

Vincent Chomienne et al.

Summary: The fatigue performance of a metallic component is influenced by its surface integrity features. Traditional fatigue testing procedures cannot discriminate between the sensitivity of each feature. This study combines different processes to determine the most sensitive features and demonstrates the synergy between a thick compressive layer and a very low surface roughness.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2023)

添加到收藏夹

Article Engineering, Mechanical

Comparative study of titanium alloys machinability used for medical applications

A. J. Festas et al.

Summary: CNC machining manufacturing is crucial to the development of the biomedical industry, especially for orthopaedic implants. This study investigates the machinability of different titanium alloys and finds that the Ti-13Nb-13Zr alloy has lower cutting forces and a worse surface finish at lower feed rates. However, when the feed rate is increased, this alloy shows the smallest increase in surface roughness compared to other alloys. Feed rate has a significant effect on cutting forces and surface finish for all tested alloys.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Sustainable Drilling of Nano SiC Reinforced Al Matrix Composites Using MQL and Cryogenic Cooling for Achieving the Better Surface Integrity

V. V. Kalyan Chakravarthy et al.

Summary: This article introduces different machining methods of Nano SiC reinforced Al matrix composite and their impact on surface integrity characteristics, evaluating the surface and subsurface of machined composites using various microscopy analysis methods. The performances are optimized using a Non-dominated Sorting Genetic Algorithm - II (NSGA-II), demonstrating that cryogenic machining can achieve better surface finish.

SILICON (2022)

添加到收藏夹

Article Chemistry, Physical

The Effect of Coatings on Cutting Force in Turning of C45 Steel

Jaroslav Kovalcik et al.

Summary: This article presents a mathematical model for calculating the cutting force of coated and uncoated cutting tool inserts. Experimental data and statistical analysis were used to determine a correction factor equation for the coating, improving the accuracy of the cutting force calculation.

MATERIALS (2022)

添加到收藏夹

Review Engineering, Manufacturing

Machining of titanium alloys for medical application-a review

Antonio Festas et al.

Summary: Titanium alloys are important biomaterials with high corrosion resistance and strength, but are difficult to machine. Research shows that using specific cutting speed and feed rate in milling, turning, and drilling, as well as employing Minimum Quantity Lubrication, are effective solutions to mitigate the machining problems.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Prediction of energy consumption of machine tools using multi-gene genetic programming

Shailendra Pawanr et al.

Summary: Researchers applied various techniques to analyze energy consumption in the past. In this study, computational artificial intelligence-based Multi-Gene Genetic Programming was used to model the energy consumption of a machine tool. The model showed high goodness of fit and was validated through hypothesis tests, indicating its applicability in predicting energy consumption in the manufacturing industry.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Taguchi based parameter optimization for cutting force reduction in SAE 1045 steel machining with nanofluid

Avinash Malladi et al.

Summary: This study investigated the effects of utilizing waste coconut oil to prepare nanofluids on reducing cutting forces, compared with conventional green machining. The results showed that the proposed method significantly reduced surface roughness and achieved the desired cutting forces by altering the cutting speed.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Ultrastructural changes of smooth and rough titanium implant surfaces induced by metal and plastic periodontal probes

Matthias Folwaczny et al.

Summary: The study found that probing of titanium implants with metal or plastic probes resulted in minor changes of the surface roughness. Metal probes increased some roughness parameters on smooth surfaces, but slightly reduced roughness on rough surfaces. Plastic probes had almost no effect on surface roughness. The clinical significance of these changes requires further investigation.

CLINICAL ORAL INVESTIGATIONS (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Surface Finish of Total Hip Arthroplasty Implants: Are We Evaluating and Manufacturing Them Appropriately?

Patricia O. Cubillos et al.

Summary: The recent change in ISO 7206-2 altered the recommended cutoff for measuring roughness of hip joint prostheses, but did not include two key sites - the bore head and the trunnion. This study evaluated whether the standardized parameters in ISO 7206-2 are appropriate for evaluating the quality of total hip arthroplasty implants. Results showed that using an interferometer to evaluate the external head surface is effective, while using a profilometer to measure the femoral head external surface is inadequate for accurate assessment.

JOURNAL OF TESTING AND EVALUATION (2021)

添加到收藏夹

Article Engineering, Mechanical

Comparison between the machinability of different titanium alloys (Ti-6Al-4V and Ti-6Al-7Nb) employing the multi-objective optimization

Amanda Oliveira Mello et al.

Summary: Titanium and its alloys are crucial in industries like aerospace, automotive, and biomedical sectors due to their reliability, functionality, high strength-to-weight ratio, and corrosion resistance. An analysis of cutting forces and surface roughness of different titanium alloys revealed similar machinability values between Ti-6Al-4V and Ti-6Al-7Nb, with uncoated inserts yielding the best results in terms of surface roughness and cutting force when used with both alloys.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

添加到收藏夹

Article Automation & Control Systems

Surface topography in machining Ti alloys for biomedical applications: correlative microscopy approach for qualitative and quantitative analysis

Silvia Carvalho et al.

Summary: The study compared the surface integrity of Ti-6Al-4V and Ti-6Al-7Nb alloys using digital microscopy techniques under different cutting conditions. Results revealed that Ti-6Al-4V samples had better homogeneity and a higher mean beta volume fraction compared to Ti-6Al-7Nb samples.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Surface roughness parameter and modeling for fatigue behavior of additive manufactured parts: A non-destructive data-driven approach

Seungjong Lee et al.

Summary: The study investigates the effect of surface roughness on the fatigue performance of metal additive manufactured parts, finding that conventional standard surface roughness parameters cannot accurately represent the correlation. A hybrid surface roughness parameter is proposed to explain fatigue behavior and has been validated through experiments, showing its reliability.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of the effects of skewness Rsk and kurtosis Rku on tribological behavior in a pin-on-disc test of surfaces machined by conventional milling and turning processes

Elhadji Cheikh Talibouya Ba et al.

Summary: Friction and wear are influenced by material surface conditions, including deformation, segregation, and oxide film generation. Roughness is an important factor in tribological studies, with skewness and kurtosis parameters having more influence than conventional parameters. This study investigates the impact of skewness and kurtosis parameters on the surface of steel, showing different behaviors in friction curves and the influence of feed marks orientation.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

A Study of the Effect of Conventional Drilling and Helical Milling in Surface Quality in Titanium Ti-6Al-4V and Ti-6AL-7Nb Alloys for Medical Applications

A. J. Festas et al.

Summary: This study analyzed the surface parameters of holes made in titanium alloys for medical devices using different manufacturing methods, finding that helical milling (HM) performed better than conventional drilling (CD) under lower feed rates and vertical step values. The Ti-6Al-7Nb alloy showed better roughness results compared to Ti-6Al-4V, making it a suitable material for medical devices.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Influence of the Titanium Implant Surface Treatment on the Surface Roughness and Chemical Composition

Ana Isabel Nicolas-Silvente et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Investigations on corrosion resistance behavior in micro-milling of Ti-6Al-4V and Ti-6Al-7Nb alloy: a comparative study

D. Avinash et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Geometric Optimization of Drills Used to Repair Holes in Magnesium Aeronautical Components

Fernando Berzosa et al.

METALS (2020)

添加到收藏夹

Article Operations Research & Management Science

Metaheuristics-based parametric optimization of multi-pass turning process: a comparative analysis

Sunny Diyaley et al.

OPSEARCH (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V

Mozammel Mia et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Vanadium ionic species from degradation of Ti-6Al-4V metallic implants: In vitro cytotoxicity and speciation evaluation

Bruna C. Costa et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting

Amal Charles et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Automation & Control Systems

Investigation and modelling of the cutting forces in turning process of the Ti-6Al-4V and Ti-6Al-7Nb titanium alloys

Sergio Luiz Moni Ribeiro Filho et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel

Morteza Sadeghifar et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

Behaviour of a biocompatible titanium alloy during orthogonal micro-cutting employing green machining techniques

Carlos Henrique Lauro et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Periimplantitis and Implant Body Roughness: A Systematic Review of Literature

Fabienne Jordana et al.

IMPLANT DENTISTRY (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Influence of Coating Material and Cutting Parameters on Surface Roughness and Material Removal Rate in Turning Process Using Taguchi Method

C. Moganapriya et al.

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Article Engineering, Mechanical

Investigation of cutting parameters affecting on tool wear and surface roughness in dry turning of Ti-6Al-4V using CVD and PVD coated tools

Yahya Hisman Celik et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)

添加到收藏夹

Review Engineering, Manufacturing

Sustainable machining of titanium alloys: A critical review

Kapil Gupta et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)

添加到收藏夹

Review Engineering, Manufacturing

The effect of cutting fluids applied in metal cutting process

Pei Yan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Analysis of behaviour biocompatible titanium alloy (Ti-6Al-7Nb) in the micro-cutting

Carlos Henrique Lauro et al.

MEASUREMENT (2016)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Improved Surface Integrity from Cryogenic Machining of Ti-6Al-7Nb Alloy for Biomedical Applications

Y. Sun et al.

3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of machined part surface roughness using image texture gradient factor

Rene Kamguem et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)

添加到收藏夹

Article Engineering, Industrial

Roughness parameters

ES Gadelmawla et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.