☆ 4.5 Article

Synthesis of a novel waterborne diethanolamine-modified lignin/polyurethane emulsion and its application as an adhesive for polypropylene decorative film on wood-based panels

POLYMER ENGINEERING AND SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Paper & Wood

An innovative approach to manufacturing flexible decorative wood veneer using EVA film as adhesive and reinforcing materials

X. I. N. H. A. O. ZHANG et al.

Summary: A simple and efficient approach to manufacturing flexible decorative wood veneer using EVA film as adhesive and reinforcing material was proposed. The EVA film reinforced decorative wood veneer showed improved flexibility and tensile strength compared to the original veneer. The EVA film also exhibited better adaptability to moisture content, and the surface bonding strength met the required standards for indoor use.

WOOD MATERIAL SCIENCE & ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Paper & Wood

Overlaying performance and bonding mechanism of wood-based panels decorated by EVA film reinforced decorative wood veneer

Xinhao Zhang et al.

Summary: This study prepared and tested decorative wood-based panels using EVA film reinforced veneer. The results showed that the surface bonding strength of veneered MDF was higher than that of veneered PW, while its immersion peel performance was weaker.

WOOD MATERIAL SCIENCE & ENGINEERING (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexible decorative wood veneer with high strength, wearability and moisture penetrability enabled by infiltrating castor oil-based waterborne polyurethanes

Lu Zhi et al.

Summary: Through a simple vacuum impregnation process, cationic PUDs successfully improved the flexibility and overall strength of FDWVs, making the wood veneers have good wear resistance, water resistance, and breathability. This environmentally friendly decorative wood veneers new process provides more choices for the preparation of decorative materials.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Agricultural Engineering

Dialdehyde starch reinforced polyacrylate-polyethylene glycol resin for impregnated decorative paper with improved toughness and ultra-low formaldehyde emission

Ru Liu et al.

Summary: By modifying MF with polyacrylate-PEG-DAS, a cross-linked structure was formed in the impregnated decorative paper interlayer, leading to improved surface bonding strength, abrasion resistance, and reduced formaldehyde emission.

INDUSTRIAL CROPS AND PRODUCTS (2022)

添加到收藏夹

Article Engineering, Chemical

Mechanically robust and self-healing waterborne polyurethane nanocomposites based on inorganic organic hybrid materials and reversible covalent interaction

Hui Wang et al.

Summary: This study proposed a simple method to give waterborne polyurethane materials self-healing properties and improve their mechanical properties by introducing furfuryl-modified silica nanoparticles. The effects of cross-linking density on the properties of nanocomposites were systematically investigated. Qualitative and quantitative studies verified the great self-healing capacity of the nanocomposites, indicating their potential as smart materials.

POLYMER ENGINEERING AND SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

An overview of different types and potential of bio-based adhesives used for wood products

Md Nazrul Islam et al.

Summary: Bio-based adhesives have gained attention in the engineered wood products industry for their environmentally friendly nature and potential to compete with synthetic adhesives. These adhesives, composed of components like cellulose and proteins, are used for bonding wood products. By modifying and blending, the properties of bio-based adhesives can be improved to move towards sustainable products.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

添加到收藏夹

Article Environmental Sciences

An eco-friendly wood adhesive based on waterborne polyurethane grafted with gelatin derived from chromium shavings waste

Mao Yang et al.

Summary: An environmentally friendly wood adhesive developed from waterborne polyurethane grafted gelatin was investigated. The graft copolymer was synthesized by extracting gelatin from chromium shavings waste and mixing it with a prepolymer emulsion of waterborne polyurethane. The results showed that the synthesized copolymer had good overall performance, excellent bonding power, and improved recyclability of chromium shavings waste.

ENVIRONMENTAL RESEARCH (2022)

添加到收藏夹

Article Engineering, Chemical

Composite waterborne polyurethane reinforced with silane modified lignin as an adhesive between polypropylene decorative films and wood-based panels

Liang Chang et al.

Summary: In this study, the surface bonding strength of polypropylene decorative films on wood-based panels was improved by using modified lignin-filled waterborne polyurethane composites as adhesives. The addition of different types of modifiers greatly enhanced the performance of the composites.

POLYMER ENGINEERING AND SCIENCE (2022)

添加到收藏夹

Article Forestry

Enhancement of the physical and mechanical properties of wood using a novel organo-montmorillonite/hyperbranched polyacrylate emulsion

Jianfeng Xu et al.

Summary: A novel waterborne HBPA/OMMT emulsion was synthesized and used to enhance the physical and mechanical properties of wood, particularly after treatment in a vacuum environment. The mechanical properties of the modified wood sample gradually improved with increasing emulsion concentration, but excessive concentration did not lead to further improvement.

HOLZFORSCHUNG (2021)

添加到收藏夹

Article Agricultural Engineering

Preparation and performance of lignin-based waterborne polyurethane emulsion

Yuanbin Lai et al.

Summary: In this study, industrial Alkali Lignin was used as a hydrophilic chain extender to prepare lignin-based waterborne polyurethane emulsions with different lignin contents. The introduction of AL improved the thermal stability and UV aging resistance of the polyurethane material, while also enhancing the mechanical properties of the film. The study demonstrates the potential of lignin-based waterborne polyurethane emulsions as a new type of bio-based polyurethane material.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Article Engineering, Chemical

Phenol-enriched hydroxy depolymerized lignin by microwave alkali catalysis to prepare high-adhesive biomass composites

Bing Di et al.

Summary: This study successfully prepared high-adhesive lignin-phenolic resin using microwave depolymerization method, showing great potential for applications. Under specific conditions of sodium hydroxide concentration, temperature, and time, the depolymerization of lignin yielded the highest phenolic hydroxy content, leading to the formation of dense and uniform pine needle units in the lignin-based phenolic resin with significantly higher bonding strength compared to other modification methods.

POLYMER ENGINEERING AND SCIENCE (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

The role of lignin and lignin-based materials in sustainable construction-A comprehensive review

Patryk Jedrzejczak et al.

Summary: The construction industry in the 21st century faces increasing global challenges related to environmental concerns. This review focuses on the role of lignin and its derivatives in sustainable construction, which can partially replace petroleum products and make the sector more sustainable. The latest technological developments offer alternative materials for construction with reduced environmental impact, contributing to a more sustainable industry.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Engineering, Chemical

Research of polypropylene (PP) decorative board surface painting used for wood product decoration and the paint film adhesion improvement by plasma

Xiaorui Peng et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

High-value utilization of hydroxymethylated lignin in polyurethane adhesives

Yinchen Chen et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Lignin as a potential source of high-added value compounds: A review

Luis Alberto Zevallos Torres et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sustainable Polyurethane-Lignin Aqueous Dispersions and Thin Films: Rheological Behavior and Thermomechanical Properties

Samy A. Madbouly et al.

ACS APPLIED POLYMER MATERIALS (2020)

添加到收藏夹

Article Polymer Science

The varying mass ratios of soft and hard segments in waterborne polyurethane films: Performances of thermal conductivity and adhesive properties

Rui Li et al.

EUROPEAN POLYMER JOURNAL (2019)

添加到收藏夹

Article Environmental Sciences

Concurrent production of sodium lignosulfonate and ethanol from bagasse spent liquor

Ali Abdulkhani et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)

添加到收藏夹

Article Agricultural Engineering

Injection molded biocomposites from polypropylene and lignin: Effect of compatibilizers on interfacial adhesion and performance

Mohamed A. Abdelwahab et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

添加到收藏夹

Review Engineering, Chemical

Lignin-based copolymer adhesives for composite wood panels - A review

Aik Fei Ang et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)

添加到收藏夹

Article Engineering, Chemical

Lignin-polystyrene composite foams through high internal phase emulsion polymerization

Zhe Zhang et al.

POLYMER ENGINEERING AND SCIENCE (2019)

添加到收藏夹

Article Engineering, Chemical

A molecular simulation analysis of influence of lignosulphonate addition on properties of modified 2-ethyl hexyl acrylate/methyl methacrylate/acrylic acid based pressure sensitive adhesive

Pratik Sanjiv Kasbe et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)

添加到收藏夹

Article Polymer Science

Structure analysis of polyether-based thermoplastic polyurethane elastomers by FTIR, H-1 NMR and C-13 NMR

Qiheng Tang et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2017)

添加到收藏夹

Article Polymer Science

Lignin nanoparticles by ultrasonication and their incorporation in waterborne polymer nanocomposites

Maria Nelly Garcia Gonzalez et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

添加到收藏夹

Article Agricultural Engineering

Influence of lignin source and esterification on properties of lignin-polyethylene blends

Laura Dehne et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

添加到收藏夹

Article Polymer Science

Synthesis and Properties of Waterborne Polyurethane (WBPU)/Modified Lignin Amine (MLA) Adhesive: A Promising Adhesive Material

Mohammad Mizanur Rahman et al.

POLYMERS (2016)

添加到收藏夹

Article Construction & Building Technology

Synthesis and super retarding performance in cement production of diethanolamine modified lignin surfactant

Yinwen Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Review Chemistry, Physical

Lignin: Recent advances and emerging applications

Magnus Norgren et al.

CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nano-SiO2/fluorinated waterborne polyurethane nanocomposite adhesive for laminated films

Heqing Fu et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)

添加到收藏夹

Article Engineering, Chemical

A Renewable Agricultural Waste Material for the Synthesis of the Novel Thermal Stability Epoxy Resins

Na Ding et al.

POLYMER ENGINEERING AND SCIENCE (2014)

添加到收藏夹

Article Agricultural Engineering

Comparison of Kraft lignin and lignosulfonates addition to wheat gluten-based materials: Mechanical and thermal properties

Antoine Duval et al.

INDUSTRIAL CROPS AND PRODUCTS (2013)

添加到收藏夹

Article Polymer Science

Improving aging resistance and mechanical properties of waterborne polyurethanes modified by lignin amines

Jun Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Article Polymer Science

Eco-friendly composite resins based on renewable biomass resources: Polyfurfuryl alcohol/lignin thermosets

Nathanael Guigo et al.

EUROPEAN POLYMER JOURNAL (2010)

添加到收藏夹

Article Engineering, Environmental

Effect of Lignosulfonate on the Thermal and Morphological Behavior of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

A. P. Lemes et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)

添加到收藏夹

Article Engineering, Chemical

Properties of Waterborne Polyurethane Adhesives: Effect of Chain Extender and Polyol Content

Mohammad Mizanur Rahman et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Chemistry, Applied

Molecular engineering of chitin based polyurethane elastomers

Khalid Mahmood Zia et al.

CARBOHYDRATE POLYMERS (2008)

添加到收藏夹

Article Chemistry, Physical

Investigation of plasma-induced photochemical reaction on a polypropylene surface

NV Bhat et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2003)

添加到收藏夹

Article Polymer Science

1H nuclear magnetic resonance study of polyurethane prepolymers from toluene diisocyanate and polypropylene glycol

M Pegoraro et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.