☆ 4.7 Article

Effect of triaxial woven fabric on bending properties of unidirectional composites

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Experimental investigation on the mechanical behavior and damage of 3D printed composites under three-point bending

Lian-hua Ma et al.

Summary: This study investigates the mechanical behaviors of 3D printed continuous fiber reinforced composites under three-point bending test using AE, DIC and Micro-CT. The results show that AE parameters are closely associated with the damage process of different specimens, and the strain fields characterized by DIC are reasonably matched with the AE signal responses. Micro-CT characterization reveals the critical damage and delamination mechanisms of the 3D printed composites.

JOURNAL OF COMPOSITE MATERIALS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Tensile damage evolution of 2D SiC(f)/BN(i)/(SiC-B4C)(m) composites based on acoustic emission pattern recognition

Yongzhen Zhang et al.

Summary: The tensile test of 2D SiC(f)/BN(i)/(SiC-B4C)((m)) was conducted with acoustic emission (AE) online monitoring to study mechanical properties and failure mechanisms. Pattern recognition technique was used to determine the relationship between AE signals and damage mechanisms, leading to the proposal of an improved sentry function. The loading process was found to consist of four stages with different damage mechanisms dominating each stage.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Mechanics

Compression after high-velocity impact behavior of pseudo-elastic shape memory alloy embedded glass/epoxy composite laminates

Luv Verma et al.

Summary: The CAI behavior of PE-SMA embedded glass/epoxy composite laminates manufactured via VARI technique was investigated experimentally after high-velocity impact. Results showed that anchored PE-SMA composites had a higher ballistic limit compared to homogeneous glass/epoxy composites, and the damage tolerance of PE-SMA based composites was better at 70 m/s but lower at higher velocities compared to homogeneous ones.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Composites

Damage analysis of combined continuous and discontinuous thin-ply carbon/glass hybrid composite using acoustic emission

Amos Ichenihi et al.

Summary: By combining partially discontinuous carbon and angled carbon layers with continuous glass and carbon, it is possible to increase the carbon/glass ratio while maintaining pseudo-ductility and improving mechanical properties. Sandwiched DC layers with CC layers show better mechanical properties compared to samples with DC layers sandwiched by CC layers.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Wei Zhou et al.

NONDESTRUCTIVE TESTING AND EVALUATION (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Quasi-static three-point bending and fatigue behavior of 3-D orthogonal woven composites

Xiaoping Gao et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

Progressive damage analysis of three-dimensional braided composites under flexural load by micro-CT and acoustic emission

Peng-fei Zhang et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Damage characterization in composite materials using acoustic emission signal-based and parameter-based data

Claudia Barile et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

The role of adhesively bonded super hybrid external patches on the impact and post-impact response of repaired glass/epoxy composite laminates

J. Jefferson Andrew et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Barely visible impact damage assessment in laminated composites using acoustic emission

Milad Saeedifar et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Mechanics

Health monitoring of timber beams retrofitted with carbon fiber composites via the acoustic emission technique

Francisco J. Rescalvo et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Post-impact static and cyclic flexural characterisation of hemp fibre reinforced laminates

Igor Maria De Rosa et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Mechanics

Buckling analysis of tri-axial woven fabric composite structures subjected to bi-axial loading

Duosheng Xu et al.

COMPOSITE STRUCTURES (2007)

添加到收藏夹

Article Mechanics

Buckling analysis of tri-axial woven fabric composite structures. Part II: parametric study - uni-directional loading

DS Xu et al.

COMPOSITE STRUCTURES (2006)

添加到收藏夹

Article Materials Science, Composites

Finite element modeling of a membrane sector of a satellite reflector made of triaxial composites

Q Zhao et al.

JOURNAL OF COMPOSITE MATERIALS (2005)

添加到收藏夹

Article Mechanics

Buckling analysis of tri-axial woven fabric composite structures. Part I: Non-linear finite element formulation

DS Xu et al.

COMPOSITE STRUCTURES (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.