☆ 4.7 Article

Performance evaluation of composite sandwich structures with additively manufactured aluminum honeycomb cores with increased bonding surface area

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Investigation of bending behavior for slotted sandwich panels made with ABS and PLA along with aluminum cores

S. S. Dou et al.

Summary: A new type of sandwich panels with increased bending resistance by creating thin layers separated from each other has been studied. Experimental and numerical analyses were performed on 14 samples, consisting of PLA and ABS materials, through three-point bending tests and LS-DYNA simulations. It was observed that creating slits perpendicular to the loading direction in the beams can enhance flexibility and reduce maximum force. Furthermore, the addition of aluminum cores and adhesive further improved energy absorption.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Composites

Sandwich structures based on fused filament fabrication 3D-printed polylactic acid honeycomb and poly(vinylidene fluoride) nanocomposites for microwave absorbing applications

Debora P. Schmitz et al.

Summary: Polylactic acid (PLA)-based honeycomb samples with different cell sizes and thickness were prepared using 3D printing technology. These honeycomb structures were used as core components in sandwiched multilayer structures with poly(vinylidene fluoride) (PVDF) and/or PVDF/carbon nanotube (CNT) nanocomposites. The properties of these structures in terms of microwave absorption were investigated, and it was found that the honeycomb design and the presence of an impedance matching layer influenced the results.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Engineering, Mechanical

Mechanical performance of sandwich composites with additively manufactured triply periodic minimal surface cellular structured core

O. Fashanu et al.

Summary: Sandwich composite structures with TPMS cellular cores were investigated for their feasibility, and mechanical tests were performed to compare the performance of different structures. The results showed changes in compressive strength, shear yield stress, and impact resistance when non-traditional cores were used in comparison to traditional honeycomb cores.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact

Ying Zhao et al.

Summary: This study investigates the dynamic behaviors, deformation and damage mechanisms, and energy absorption of aluminium foam sandwich structures subjected to low-velocity impact. Experimental and numerical analyses were conducted to evaluate the influences of face sheet thickness, core height, and density on the performance of energy absorption. The results show that the combination of impact energy and energy absorption indicators play a crucial role in the optimal design of sandwich structures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Free vibration and transient dynamic response of functionally graded sandwich plates with power-law nonhomogeneity by the scaled boundary finite element method

Jun Liu et al.

Summary: Functionally graded material sandwich plates were analyzed for their dynamic behaviors using the SBFEM method with a layerwise approach and continuously graded material properties. The proposed method showed high accuracy and efficiency in dynamic analysis.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Effect of geometrical parameters on the flexural properties of sandwich structures with 3D-printed honeycomb core and E-glass/epoxy Face-sheets

Sabah Pirouzfar et al.

Summary: This study investigates the flexural properties of 3D-printed honeycomb structures and sandwich panels with face-sheets made of E-glass/epoxy laminates. The impact of different geometrical parameters on the flexural properties is examined, with the horizontal honeycomb core structure showing the highest normalized energy absorption. The use of additive manufacturing technology significantly improves the flexural properties of the honeycomb core sandwich structures compared to traditional materials like Nomex and Aluminum.

STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Anti-impact behavior of auxetic sandwich structure with braided face sheets and 3D re-entrant cores

Rohit Raju Madke et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexural deformation behavior of carbon fiber reinforced aluminium hybrid foam sandwich structure

Ashutosh Pandey et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Civil

Effect of structural parameters on low-velocity impact behavior of aluminum honeycomb sandwich structures with CFRP face sheets

Wentao He et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Sandwich Structures with Prismatic and Foam Cores: A Review

Jian Xiong et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Mechanics

Strength, stiffness, and panel peeling strength of carbon fiber-reinforced composite sandwich structures with aluminum honeycomb cores for vehicle body

Jianfeng Wang et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of the core density on the quasi-static flexural and ballistic performance of fibre-composite skin/foam-core sandwich structures

Cihan Kaboglu et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Mechanics

Impact responses of sandwich panels with fibre metal laminate skins and aluminium foam core

Chengjun Liu et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Bending behavior of sandwich composite structures with tunable 3D-printed core materials

Tiantian Li et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Manufacturing

Strain-rate effects in Ni/Al composite metal foams from quasi-static to low-velocity impact behaviour

A. Jung et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and numerical investigation on the crushing behavior of sandwich composite under edgewise compression loading

Hongshuai Lei et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

On compressive properties of composite sandwich structures with grid reinforced honeycomb core

Zhi Sun et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Composites

Damage resistance of aluminum core honeycomb sandwich panels with carbon/epoxy face sheets

Abhendra K. Singh et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

添加到收藏夹

Article Materials Science, Composites

Low-velocity impact behavior of hollow core woven sandwich composite: Experimental and numerical study

Seyyed Ahmad Hosseini et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

添加到收藏夹

Article Engineering, Civil

Flexural strength and energy absorption of carbon-fiber-aluminum-honeycomb composite sandwich reinforced by aluminum grid

Shanshan Shi et al.

THIN-WALLED STRUCTURES (2014)

添加到收藏夹

Article Engineering, Mechanical

Low-velocity perforation behavior of composite sandwich panels with aluminum foam core

Zhibin Li et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2013)

添加到收藏夹

Article Engineering, Mechanical

Impact response of sandwich beams with various curvatures and debonds

Buket Okutan Baba

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2013)

添加到收藏夹

Review Materials Science, Multidisciplinary

Laser additive manufacturing of metallic components: materials, processes and mechanisms

D. D. Gu et al.

INTERNATIONAL MATERIALS REVIEWS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study on composite honeycomb sandwich panel structure

Meifeng He et al.

MATERIALS & DESIGN (2008)

添加到收藏夹

Article Mechanics

Mechanical properties of Nomex material and Nomex honeycomb structure

Choon Chiang Foo et al.

COMPOSITE STRUCTURES (2007)

添加到收藏夹

Article Mechanics

Impact failure characteristics in sandwich structures Part I: Basic failure mode selection

LR Xu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2002)

添加到收藏夹

Article Mechanics

The effect of facesheet/core delamination in sandwich structures under transverse loading

S Goswami et al.

COMPOSITE STRUCTURES (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.