☆ 4.7 Article

Comparative analysis of hydrothermal properties of ramie fiber-reinforced phenolic resin and ramie fiber-reinforced unsaturated polyester composites

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Hydrothermal durability of unidirectional flax/carbon fiber hybrid composite plates

Anni Wang et al.

Summary: Hybrid carbon fiber/flax reinforced polymer composites (HFRPs) are cost-effective materials for structural applications. This study investigated the property evolution of HFRP plates immersed in water at 40 and 70 degrees C for eight weeks. The water uptake and flexural properties of the HFRP samples were analyzed based on hybrid modes and fiber contents. The diffusion coefficient and equilibrium water absorption of HFRPs increased with temperature, and the deterioration of performance was more pronounced. HFRPs with carbon fibers on the surface showed better hydrothermal resistance and lower water absorption compared to other hybrid modes.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Mechanics

Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites

Ping Cheng et al.

Summary: This study aimed to investigate the penetration behaviors of 3D printed biocomposites with continuous ramie yarn reinforcement. The results showed that the penetration property and energy absorption capability of the samples increased with decreasing support span to indenter diameter ratios (SIR) and with the addition of continuous ramie yarn. The structure-penetration property relationship of the 3D printed woven-like architectured biocomposite was revealed through the analysis of multiscale failure features and penetration damage mechanisms.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Review Polymer Science

A Review on Lignin-Based Phenolic Resin Adhesive

Xiaoyu Gong et al.

Summary: It is increasingly important to replace petroleum-based chemicals with biomass-based alternatives for the development of a low-carbon economy. The use of biobased lignin as a partial replacement for phenol in phenolic resin adhesives used in the wood panels industry can significantly reduce carbon emissions and negative environmental impact. However, the limitations of lignin's structure and activity hinder its application as an adhesive, and researchers have developed various modification methods to overcome these issues.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Chemistry, Applied

A biodegradable chitosan-based composite film reinforced by ramie fibre and lignin for food packaging

Maocheng Ji et al.

Summary: By adding ramie fibre and lignin to the chitosan-based film, significant improvements in mechanical, water resistance, thermal, and antioxidant properties were observed. The composite films showed better food preservation effects, indicating the great potential of chitosan-based films in food packaging.

CARBOHYDRATE POLYMERS (2022)

添加到收藏夹

Article Materials Science, Composites

Durable mechanical properties of unidirectional flax fiber/phenolic composites under hydrothermal aging

Ming Cai et al.

Summary: This study systematically investigated the effects of water absorption on the mechanical properties of flax fiber reinforced phenolic composites. The results showed that long-term hydrothermal aging decreased the strength and interlaminar shear characteristics of the composites, leading to degradation of the fibers and matrix.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Mechanics

Effect of water and mechanical retting process on mechanical and physical properties of kenaf bast fiber reinforced unsaturated polyester composites

A. R. Rozyanty et al.

Summary: This study investigates the effects of retting processes on kenaf fiber-reinforced unsaturated polyester composites, finding that water retting resulted in higher tensile strength while mechanical retting led to greater water absorption. The results indicate that water retting yielded better mechanical and water absorption properties compared to mechanical retting across all different fiber loadings.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Agricultural Engineering

Advanced textile technology for fabrication of ramie fiber PLA composites with enhanced mechanical properties

Xue Yang et al.

Summary: The combination of PLA and RFs in 3D RF/PLA composites offers optimized mechanical properties, including tensile, flexural, and shearing properties. By adjusting the twist ratio, curing parameters, and RF content, the performance of the composites can be optimized to achieve maximum flexural strength and modulus.

INDUSTRIAL CROPS AND PRODUCTS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Solvothermal degradation and reuse of carbon fiber reinforced boron phenolic resin composites

Zongyi Deng et al.

Summary: This paper investigated the recycling of carbon fibers via solvothermal degradation of CF/BPR composites, achieving a high degradation ratio of 98.3%. The study focused on the effects of KOH concentration, reaction time, and temperature on the degradation ratio, as well as the characterization of surface and microstructural properties of both virgin and recycled carbon fibers. The mechanical tests showed that recycled carbon fibers reinforced boron phenolic resin composites had superior flexural strength compared to virgin ones.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Accelerated weathering studies of kenaf/sisal fiber fabric reinforced fully biobased hybrid bioepoxy composites for semi-structural applications: Morphology, thermo-mechanical, water absorption behavior and surface hydrophobicity

Krittirash Yorseng et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

Recent advancements of plant-based natural fiber-reinforced composites and their applications

Mi Li et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Review Materials Science, Composites

High performances of plant fiber reinforced composites-A new insight from hierarchical microstructures

Zhongsen Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Mechanical, low-velocity impact, and hydrothermal aging properties of flax/carbon hybrid composite plates

Anni Wang et al.

POLYMER TESTING (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recent advancement in the natural fiber polymer composites: A comprehensive review

S. Vigneshwaran et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Mechanical properties of natural fiber/particulate reinforced epoxy composites - A review of the literature

R. Jeyapragash et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Materials Science, Composites

Hygrothermal aging and structural damage of a jute/poly (lactic acid) (PLA) composite observed by X-ray tomography

Ning Jiang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Polymer Science

Effects of Fiber Surface Grafting with Nano-Clay on the Hydrothermal Ageing Behaviors of Flax Fiber/Epoxy Composite Plates

Anni Wang et al.

POLYMERS (2019)

添加到收藏夹

Article Agricultural Engineering

Ramie, a multipurpose crop: potential applications, constraints and improvement strategies

Muzammal Rehman et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

添加到收藏夹

Article Mechanics

Effect of water ageing on the load-unload cyclic behaviour of flax fibre-reinforced thermoplastic and thermosetting composites

Abderrazak Chilali et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Agricultural Engineering

Water-resistant hemp fiber-reinforced composites: In-situ surface protection by polyethylene film

Yingji Wu et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Characterization and properties of natural fiber polymer composites: A comprehensive review

M. R. Sanjay et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Effects of water, alkali solution and temperature ageing on water absorption, morphology and mechanical properties of natural FRP composites: Plant based jute vs. mineral-based basalt

Gao Ma et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Agricultural Engineering

Standard density measurement method development for flax fiber

Ali Amiri et al.

INDUSTRIAL CROPS AND PRODUCTS (2017)

添加到收藏夹

Article Agricultural Engineering

Reversible and irreversible changes in physical and mechanical properties of biocomposites during hydrothermal aging

Arnaud Regazzi et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

添加到收藏夹

Review Engineering, Multidisciplinary

Flax fibre and its composites - A review

Libo Yan et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Review Chemistry, Applied

Green composites from sustainable cellulose nanofibrils: A review

H. P. S. Abdul Khalil et al.

CARBOHYDRATE POLYMERS (2012)

添加到收藏夹

Article Engineering, Manufacturing

Reprocessing of wood fibre reinforced polypropylene composites. Part II: Hygrothermal ageing and its effects

M. D. H. Beg et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.