☆ 4.7 Article

Preparation and performance study of ionic liquid @ boron nitride modified polyimide proton exchange membrane

POLYMER COMPOSITES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Design and economic analysis of high-pressure proton exchange membrane electrolysis for renewable energy storage

Jian Dang et al.

Summary: The use of high-pressure cathode in proton exchange membrane (PEM) electrolysis can eliminate the need for a hydrogen compressor and enhance the efficiency of hydrogen transmission. This study conducted an economic analysis of the entire process from hydrogen production to transportation, demonstrating the advantages of high-pressure PEM electrolysis. The influence of cathode pressure and membrane thickness on energy consumption and capital expenditure of the electrolyzer was analyzed, considering factors such as hydrogen permeability, ohmic impedance, and structural design. Furthermore, the impact of renewable energy scale on the choice between PEM and ALK was evaluated, showing that PEM has an advantage in large-scale renewable energy applications.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

添加到收藏夹

Article Engineering, Chemical

Sulfonated graphene oxide doped sulfonated polybenzothiazoles for proton exchange membrane fuel cells

Gang Wang et al.

Summary: A series of sulfonated polybenzothiazoles (sPBT-E) with flexible ether groups in the polymer backbone were synthesized. Sulfonated graphene oxide (SGO) was doped into the sPBT-E matrix to enhance proton conduction. The sPBT-E62.5/SGO3 membrane exhibited excellent potential as an alternative proton exchange membrane for fuel cells.

JOURNAL OF MEMBRANE SCIENCE (2023)

添加到收藏夹

Article Polymer Science

High-performance sandwich-structure PI/SPEEK plus HPW nanofiber composite membrane with balanced proton conductivity and stability

Peng Wei et al.

Summary: To address the conflict between strong proton conductivity and high stability in SPEEK-based PEM, researchers developed a sandwich-structure hybrid membrane by incorporating phosphotungstic acid and polyimide nanofibers. The experimental results demonstrated that this hybrid membrane exhibited lower swelling ratio and higher conductivity, making it more stable and superior to SPEEK.

POLYMER (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Design and Development of Copper Trimesic Acid Anchored sPEEK/Polyimide Composite Membranes for Fuel Cell Applications

Mahalingam Aparna et al.

Summary: A copper-based metal organic framework (MOF) anchored polymeric blend membrane with excellent properties was developed for fuel cell application. The Cu-MOF served as a filler material and showed well-defined crystallite sites with an average size of 0.3 angstrom. By interacting with the sulfonic acid group in the matrix, the MOF improved proton conduction through hydrogen bonding interaction. The experimental results showed that the composite membranes exhibited high ion exchange capacity, water uptake, and proton conductivity, making them efficient proton exchange membranes for PEMFCs.

CHEMISTRYSELECT (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controlled Distributed Ti3C2Tx Hollow Microspheres on Thermally Conductive Polyimide Composite Films for Excellent Electromagnetic Interference Shielding

Yali Zhang et al.

Summary: Flexible multifunctional (Fe3O4/PI)-Ti3C2Tx-(Fe3O4/PI) composite films with controllable pore sizes and distribution of Ti3C2Tx hollow microspheres were successfully prepared by sacrificial template method. The composite films demonstrated excellent electromagnetic interference (EMI) shielding performance, thermal conductivity, and mechanical properties, making them suitable for EMI shielding protection for high-power, portable, and wearable flexible electronic devices.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multifunctional Thermally Conductive Composite Films Based on Fungal Tree-like Heterostructured Silver Nanowires@Boron Nitride Nanosheets and Aramid Nanofibers

Yixin Han et al.

Summary: Thermal conduction in electronic equipment for 5G communication is becoming increasingly important. The design of highly thermally conductive fillers and polymer composite films with prominent Joule heating characteristics and extensive mechanical properties is urgently needed. In this study, a solvothermal & in situ growth method was used to prepare thermally conductive fillers consisting of silver nanowires and boron nitride nanosheets. Composite films with optimized thermal conductivity were obtained by suction filtration and hot pressing. The resulting films exhibited high thermal conductivity, excellent tensile strength, good temperature-voltage response characteristics, and superior electrical stability and reliability, making them promising for widespread applications in 5G electronic devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

添加到收藏夹

Article Engineering, Chemical

Ultra-thin h-BN doped high sulfonation sulfonated poly (ether-ether-ketone) of PTFE-reinforced proton exchange membrane

Ziyi Huang et al.

Summary: In this study, an ultra-thin reinforced membrane was prepared using hexagonal boron nitride nanosheets, high sulfonated poly (ether-ether-ketone), and expanded polytetrafluoroethylene for low-humidification proton exchange membrane fuel cell. The membrane showed good proton conductivity and high cell performance, indicating its potential application in low-humidity PEMFC.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Polymer Science

Ordered Alignment of Liquid Crystalline Graphene Fluoride for Significantly Enhancing Thermal Conductivities of Liquid Crystalline Polyimide Composite Films

Kunpeng Ruan et al.

Summary: In this study, liquid crystalline modification was performed on graphene fluoride (LC-GeF) to achieve ordered alignment, and a thermally conductive liquid crystalline polyimide (LC-PI) matrix was utilized to fabricate thermally conductive LC-GeF/LC-PI composite films. These films exhibited significantly improved thermal conductivity, insulation, mechanical, and thermal properties compared to normal PI films and LC-PI films.

MACROMOLECULES (2022)

添加到收藏夹

Article Chemistry, Physical

CO tolerant Pt electrocatalysts for PEM fuel cells with enhanced stability against electrocorrosion

Irina Borbath et al.

Summary: An optimized route for preparing Ti0.8Mo0.2O2-C composite supports for Pt electro-catalysts was developed using sol-gel synthesis, resulting in high stability and CO tolerance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Analytical

Self-sustained oscillations in the potential of a CO-poisoned PEM fuel cell: A model based on physical principles

David Levitan et al.

Summary: This study presents a dynamic 1-D model for simulating the oscillatory behavior in the anode potential of a PEM fuel cell under constant current conditions and the presence of CO impurities, which is validated with experimental data and investigates the parametric sensitivity of CO-electrooxidation and OH-adsorption kinetic rates on the oscillation frequency. The model effectively captures the phenomenon of oscillatory behavior and provides insights on the effects of different kinetic rates on system dynamics.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

添加到收藏夹

Article Environmental Sciences

Development of proton-exchange membrane fuel cell with ionic liquid technology

Kuan Shiong Khoo et al.

Summary: This review summarizes the application of ionic liquids in high-temperature proton exchange membrane fuel cells, discusses their advantages when combined with polybenzimidazole, and evaluates and discusses the research development and issues of ILs.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

添加到收藏夹

Article Energy & Fuels

Enhanced Performance of the Chitosan Proton Exchange Membrane via Anatase Titania Anchored GO and Sodium Ligninsulfonate Constructing Proton Transport Channels

Fangyan Cui et al.

ENERGY & FUELS (2020)

添加到收藏夹

Article Polymer Science

Effect of Chemical Structure and Degree of Branching on the Stability of Proton Exchange Membranes Based on Sulfonated Polynaphthylimides

Chunmei Gao et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Densification behavior and microstructure development in TiB2 ceramics doped with h-BN

Thang Phan Nguyen et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Composites

Enhanced ionic conductivity of electrospun nanocomposite (PVDF-HFP + TiO2 nanofibers fillers) polymer fibrous membrane electrolyte for DSSC application

S. Vinoth et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

From Self-Assembly Hierarchical h-BN Patterns to Centimeter-Scale Uniform Monolayer h-BN Film

Dechao Geng et al.

ADVANCED MATERIALS INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

A preliminary solar-hydrogen system for Jordan: Impacts assessment and scenarios analysis

K. Alrabie et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

AA'-Stacked Trilayer Hexagonal Boron Nitride Membrane for Proton Exchange Membrane Fuel Cells

Seong In Yoon et al.

ACS NANO (2018)

添加到收藏夹

Article Chemistry, Physical

Improving the proton conductivity of proton exchange membranes via incorporation of HPW-functionalized mesoporous silica nanospheres into SPEEK

Haixia Gao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

添加到收藏夹

Article Engineering, Chemical

Improved mechanical and thermal properties of gelatin films using a nano inorganic filler

Xiaomeng Wu et al.

JOURNAL OF FOOD PROCESS ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Proton-exchange membranes with enhanced anhydrous proton conductivity by room temperature ionic liquid anchored to silica

Pai Peng et al.

FUNCTIONAL MATERIALS LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Economic energy management strategy design and simulation for a dual-stack fuel cell electric vehicle

Xu Han et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

Polybenzimidazole based nanocomposite membranes with enhanced proton conductivity for high temperature PEM fuel cells

Yagmur Ozdemir et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Engineering, Chemical

Polybenzimidazole/ionic-liquid-functional silica composite membranes with improved proton conductivity for high temperature proton exchange membrane fuel cells

Fengxiang Liu et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

添加到收藏夹

Review Polymer Science

Progression from Polyimide to Polyimide Composite in Proton-Exchange Membrane Fuel Cell: A Review

Ayesha Kausar

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Composites

Effect of Clay Modification on the Structure and Properties of Sulfonated Poly(ether ether ketone)/Clay Nanocomposites

Shaojian He et al.

POLYMER COMPOSITES (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sulfonic Acid- and Lithium Sulfonate-Grafted Poly(Vinylidene Fluoride) Electrospun Mats As Ionic Liquid Host for Electrochromic Device and Lithium-Ion Battery

Rui Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Engineering, Mechanical

Effect of molecular weight on tribological properties of thermosetting polyimide under high temperature

Wang Yanming et al.

TRIBOLOGY INTERNATIONAL (2014)

添加到收藏夹

Article Polymer Science

Improving the Conductivity of Sulfonated Polyimides as Proton Exchange Membranes by Doping of a Protic Ionic Liquid

Bor-Kuan Chen et al.

POLYMERS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Selective Growth of MoS2 for Proton Exchange Membranes with Extremely High Selectivity

Kai Feng et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

添加到收藏夹

Article Materials Science, Composites

Thermal conductive performance of organosoluble polyimide/BN and polyimide/(BN plus ALN) composite films fabricated by a solution-cast method

D. H. Kuo et al.

POLYMER COMPOSITES (2013)

添加到收藏夹

Article Chemistry, Physical

The research status of Nafion ternary composite membrane

Jun Ma et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

添加到收藏夹

Article Chemistry, Physical

Macromolecular protic ionic liquid-based proton-conducting membranes for anhydrous proton exchange membrane application

Fuqiang Chu et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Super Proton Conductive High-Purity Nafion Nanofibers

Bin Dong et al.

NANO LETTERS (2010)

添加到收藏夹

Article Chemistry, Physical

A facile approach for the preparation of cross-linked sulfonated polyimide membranes for fuel cell application

Jianhua Fang et al.

JOURNAL OF MATERIALS CHEMISTRY (2007)

添加到收藏夹

Article Chemistry, Physical

Operation of PEM fuel cells at 120-150°C to improve CO tolerance

Hui Xu et al.

JOURNAL OF POWER SOURCES (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.