4.4 Article

Design of a plasma-based intelligent reflecting surface

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Electrical & Electronic

Plasma-Based Reflective Surface for Polarization Conversion

Mirko Magarotto et al.

Summary: This study examines the use of magnetized plasmas for polarization conversion on reflective surfaces, and presents a theoretical model to assess its feasibility. The study also includes the numerical design of a plasma-based reflective surface capable of linear-to-linear and linear-to-circular polarization conversion over a wide frequency range. The design requires a tunable magnetic field intensity of 55-140 mT and control of plasma density up to 2 x 10(18) m(-3), which align with current plasma technology advancements.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2023)

Article Engineering, Aerospace

Design and In-orbit Demonstration of REGULUS, an Iodine electric propulsion system

Nicolas Bellomo et al.

Summary: REGULUS is an Iodine-based electric propulsion system designed for CubeSat platforms larger than 6 U. It has been integrated on the UniSat-7 satellite for an ongoing In-orbit Demonstration (IoD).

CEAS SPACE JOURNAL (2022)

Article Physics, Fluids & Plasmas

Design of a Hybrid Metal-Plasma Transmit-Array With Beam-Scanning Capabilities

Giulia Mansutti et al.

Summary: This article presents the complete design of a hybrid metal-plasma transmit-array antenna with beam-scanning capabilities. The antenna's main lobe can be tilted towards different directions by turning on/off specific subsets of plasma discharges. The design utilizes a two-step optimization strategy and incorporates realistic simulations and sensitivity analysis to evaluate the antenna's performance.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2022)

Article Physics, Fluids & Plasmas

Semi-Analytical Model of a Helicon Plasma Thruster

Matteo Guaita et al.

Summary: This article presents a semianalytical model of a helicon plasma thruster that includes simulation of the plasma source, plasma expansion and thrust production in the magnetic nozzle, and identification of plasma detachment from the magnetic field lines. A comparison of different models shows a maximum relative deviation of 3% for the acceleration models and a thrust variation of 20%-30% for different detachment criteria. The maximum relative error between the model's predictions and the experimental measurements is 25%.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2022)

Article Computer Science, Information Systems

Feasibility of a Plasma-Based Intelligent Reflective Surface

Mirko Magarotto et al.

Summary: This study investigates the feasibility of plasma-based Intelligent Reflecting Surfaces (IRSs) and proposes two designs for plasma-based IRSs. The main advantage of plasma-based IRSs over metallic systems is the ability to reconfigure antenna performance, but the main drawback is the need for thick plasma elements.

IEEE ACCESS (2022)

Article Engineering, Aerospace

Feasibility study of a novel class of plasma antennas for SatCom navigation systems

Paola De Carlo et al.

Summary: Gaseous Plasma Antennas (GPAs) utilize weakly or fully ionized gases to transmit and receive electromagnetic waves, offering advantages over metallic antennas. They are particularly suitable for applications like Global Navigation Satellite System (GNSS) due to their ability to reduce multipath errors. The use of GPAs in critical networks such as Public Protection and Disaster Relief (PPDR) is of great importance, and their performance has been evaluated in the L band for GNSS application.

ACTA ASTRONAUTICA (2021)

Article Physics, Fluids & Plasmas

Numerical Suite for Gaseous Plasma Antennas Simulation

Mirko Magarotto et al.

Summary: A gaseous plasma antenna (GPA) is a device that uses plasma medium to transmit or receive electromagnetic waves, and a numerical suite was presented to simulate the plasma parameters and antenna properties separately. The plasma module was implemented on OpenFOAM library, while the EM module relied on CST Microwave Studio, leading to the characterization of a realistic plasma dipole with higher discharge current achieving higher gain and closer input impedance to that of a metallic dipole, and the ability to electronically shift resonance frequency.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2021)

Article Engineering, Electrical & Electronic

Intelligent Reflecting Surface-Aided Wireless Communications: A Tutorial

Qingqing Wu et al.

Summary: Intelligent reflecting surface (IRS) is a technology that can alter wireless signal propagation in wireless networks by dynamically changing wireless channels to enhance communication performance. The future hybrid wireless network aided by IRS, comprising both active and passive components, is expected to achieve sustainable capacity growth cost-effectively.

IEEE TRANSACTIONS ON COMMUNICATIONS (2021)

Review Engineering, Electrical & Electronic

Survey on reconfigurable intelligent surfaces below 10 GHz

Visa Tapio et al.

Summary: This paper discusses the basic operation of Reconfigurable Intelligent Surface (RIS) and emphasizes its potential in applications operating below 10 GHz frequencies, which provides a faster track to market for RIS applications compared to current high frequency research.

EURASIP JOURNAL ON WIRELESS COMMUNICATIONS AND NETWORKING (2021)

Article Engineering, Electrical & Electronic

Experimental Characterization of a Plasma Dipole in the UHF Band

Paola De Carlo et al.

Summary: The experimental characterization of a plasma dipole in the ultrahigh frequency band is presented. The plasma parameters were measured to compute the electric permittivity, and reflection coefficient and antenna gain were derived through computer simulations and measurements in a portion of the spectrum centered at 0.435 GHz.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2021)

Article Physics, Fluids & Plasmas

Development of a lumping methodology for the analysis of the excited states in plasma discharges operated with argon, neon, krypton, and xenon

N. Souhair et al.

Summary: The paper presents a methodology for computing plasma properties, focusing on reducing computational cost through lumping and evaluating the influence of different cross section datasets on results. The proposed strategy has been implemented in both zero-dimensional and multidimensional models, showing promising results in benchmarking and comparison with experiments.

PHYSICS OF PLASMAS (2021)

Article Engineering, Electrical & Electronic

Towards Smart and Reconfigurable Environment: Intelligent Reflecting Surface Aided Wireless Network

Qingqing Wu et al.

IEEE COMMUNICATIONS MAGAZINE (2020)

Article Materials Science, Multidisciplinary

Modeling and design of a plasma-based transmit-array with beam scanning capabilities

Giulia Mansutti et al.

RESULTS IN PHYSICS (2020)

Article Physics, Applied

Properties of MgAl2O4 doped alumina barrier layers for dielectric barrier discharge

R. Pribyl et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)

Article Physics, Fluids & Plasmas

Characterisation of a thermionic plasma source apparatus for high-density gaseous plasma antenna applications

Alexander Daykin-Iliopoulos et al.

PLASMA SOURCES SCIENCE & TECHNOLOGY (2020)

Article Engineering, Electrical & Electronic

Smart Radio Environments Empowered by Reconfigurable Intelligent Surfaces: How It Works, State of Research, and The Road Ahead

Marco Di Renzo et al.

IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS (2020)

Article Engineering, Aerospace

REGULUS: A propulsion platform to boost small satellite missions

M. Manente et al.

ACTA ASTRONAUTICA (2019)

Article Engineering, Electrical & Electronic

Beam-forming capabilities of a plasma circular reflector antenna

Davide Melazzi et al.

IET MICROWAVES ANTENNAS & PROPAGATION (2018)

Article Engineering, Electrical & Electronic

Analytical and Numerical Study of a Gaseous Plasma Dipole in the UHF Frequency Band

Davide Melazzi et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2017)

Review Physics, Applied

The 2017 Plasma Roadmap: Low temperature plasma science and technology

I. Adamovich et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

Article Physics, Fluids & Plasmas

Theory of a beam-driven plasma antenna

I. V. Timofeev et al.

PHYSICS OF PLASMAS (2016)

Article Physics, Fluids & Plasmas

Radiation characteristics of input power from surface wave sustained plasma antenna

T. Naito et al.

PHYSICS OF PLASMAS (2016)

Article Physics, Fluids & Plasmas

Helicon plasma thruster discharge model

T. Lafleur

PHYSICS OF PLASMAS (2014)

Article Optics

Coding metamaterials, digital metamaterials and programmable metamaterials

Tie Jun Cui et al.

LIGHT-SCIENCE & APPLICATIONS (2014)

Article Instruments & Instrumentation

A microwave interferometer for small and tenuous plasma density measurements

O. Tudisco et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2013)

Article Engineering, Electrical & Electronic

Reconfigurable Reflectarrays Based on Optimized Spiraphase-Type Elements

Jesus Rodriguez-Zamudio et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2012)

Article Engineering, Electrical & Electronic

X-Band Reflectarray Antenna With Switching-Beam Using PIN Diodes and Gathered Elements

Eduardo Carrasco et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2012)

Article Physics, Fluids & Plasmas

Recent results for plasma antennas

Igor Alexeff et al.

PHYSICS OF PLASMAS (2008)

Review Physics, Applied

Plasma display panels: physics, recent developments and key issues

JP Boeuf

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2003)

Article Physics, Fluids & Plasmas

Plasmas as antennas: Theory, experiment and applications

GG Borg et al.

PHYSICS OF PLASMAS (2000)