☆ 4.7 Article

Decrypting the mechanisms of wicking and evaporation heat transfer on micro-pillars during the pool boiling of water using high-resolution infrared thermometry

PHYSICS OF FLUIDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Enhancement of Boiling with Scalable Sandblasted Surfaces

Youngsup Song et al.

Summary: This study investigates sandblasting as a scalable surface engineering technique for enhancing pool boiling heat transfer. The results show that surface roughness and volumetric wicking rate increase with the abrasive size, resulting in significant improvements in the critical heat flux and heat transfer coefficient.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Thermodynamics

Unified descriptor for enhanced critical heat flux during pool boiling of hemi-wicking surfaces

Youngsup Song et al.

Summary: This study investigates the role of structured surfaces in enhancing critical heat flux (CHF) during pool boiling. The results show that CHF enhancement on structured surfaces cannot be solely explained by roughness or wickability. A unified descriptor, representing the combined effects of thin film density and volumetric wicking rate, is derived and shows a reasonable correlation with CHF values.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Mechanics

Electric field enhancement of pool boiling of dielectric fluids on pillar-structured surfaces: A lattice Boltzmann study

Wanxin Li et al.

Summary: Using a phase-change lattice Boltzmann (LB) model coupled with an electric field model, this paper investigates the performance and enhancement mechanism of pool boiling of dielectric fluids on pillar-structured surfaces under an electric field. The numerical investigation reveals that the application of an electric field has both positive and negative effects on pool boiling. It prevents bubble coalescence in channels and blocks liquid supply, leading to the deterioration of pool boiling in the medium-superheat regime. However, it also delays the occurrence of boiling crisis by suppressing the formation of a continuous vapor film and promotes the departure of bubbles on the pillar tops, improving the critical heat flux (CHF).

PHYSICS OF FLUIDS (2022)

添加到收藏夹

Article Mechanics

The not-so-subtle flaws of the force balance approach to predict the departure of bubbles in boiling heat transfer

Mattia Bucci et al.

Summary: The force balance approach in predicting the departure of rapidly growing bubbles from a boiling surface is found to be inaccurate and unreliable due to the sensitivity of predictions to small errors in external forces and the questionable assumptions and uncertainties present in the analytical expressions used to estimate these forces.

PHYSICS OF FLUIDS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microtube Surfaces for the Simultaneous Enhancement of Efficiency and Critical Heat Flux during Pool Boiling

Youngsup Song et al.

Summary: Boiling is a fundamental process in many applications where surfaces with microcavities or biphilic wettability can enhance heat transfer efficiency. This study investigated microtube structures to simultaneously enhance heat transfer coefficient and critical heat flux, achieving significant improvements compared to smooth surfaces. The combination of micropillars and microtubes further increased critical heat flux by separating nucleating bubbles and rewetting liquids.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Engineering, Manufacturing

CPU Overclocking: A Performance Assessment of Air, Cold Plates, and Two-Phase Immersion Cooling

Bharath Ramakrishnan et al.

Summary: With the continuous improvement in computing capacity, the demand for high-performance cooling technologies in data centers is increasing. Cold plates and 2P immersion techniques demonstrate higher heat transfer capacity, resulting in higher computational performance and efficiency compared to air cooling.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Observation of heat transfer mechanisms in saturated pool boiling of water by high-speed infrared thermometry

Takanori Tanaka et al.

Summary: The study revealed the significant contribution of microlayer evaporation to bubble growth in saturated pool boiling, with transient heat conduction and convective heat transfer also playing important roles. Microlayer accounted for approximately 50% of bubble growth, while convective heat transfer was found to be the dominant wall heat transfer mode.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Mechanics

Bubble dynamics and dry spot formation during boiling on a hierarchical structured surface: A lattice Boltzmann study

Y. Yu et al.

Summary: The boiling heat transfer on the hierarchical structured surface is significantly influenced by the structural parameters of secondary pillars. Increasing the height or width of the secondary pillars can enhance the bubble departure frequency, but may also enlarge the dry spot area.

PHYSICS OF FLUIDS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Liquid film-induced critical heat flux enhancement on structured surfaces

Jiaqi Li et al.

Summary: This study used high-magnification in-liquid endoscopy to investigate bubble behavior during boiling on structured surfaces, revealing the previously unknown coexistence of two distinct three-phase contact lines, resulting in the retention of a thin liquid film between the two contact lines. This finding sheds light on a previously unidentified mechanism governing bubble evolution on structured surfaces and has significant implications for various real systems utilizing bubble formation.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Boiling Heat Transfer with a Well-Ordered Microporous Architecture

Quang N. Pham et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Efficiency Boiling Heat Transfer Interfaces Composed of Electroplated Copper Nanocone Cores and Low-Thermal-Conductivity Nickel Nanocone Coverings

Feifei Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hierarchically Structured Laser-Induced Graphene for Enhanced Boiling on Flexible Substrates

Daeyoung Kong et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Synchrotron x-ray imaging visualization study of capillary-induced flow and critical heat flux on surfaces with engineered micropillars

Dong In Yu et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Review Thermodynamics

Critical heat flux enhancement by surface modification in a saturated pool boiling: A review

Shoji Mori et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

A new CHF model for enhanced pool boiling heat transfer on surfaces with micro-scale roughness

Ran Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Water Wicking and Droplet Spreading on Randomly Structured Thin Nanoporous Layers

Claire K. Wemp et al.

LANGMUIR (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancement of Pool Boiling Heat Transfer Using Aligned Silicon Nanowire Arrays

Dong Il Shim et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Physics, Applied

Critical heat flux maxima resulting from the controlled morphology of nanoporous hydrophilic surface layers

Melanie Tetreault-Friend et al.

APPLIED PHYSICS LETTERS (2016)

添加到收藏夹

Article Mechanics

A mechanistic IR calibration technique for boiling heat transfer investigations

Matteo Bucci et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Early Evaporation of Microlayer for Boiling Heat Transfer Enhancement

An Zou et al.

LANGMUIR (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Critical heat flux maxima during boiling crisis on textured surfaces

Navdeep Singh Dhillon et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Physics, Applied

Interfacial wicking dynamics and its impact on critical heat flux of boiling heat transfer

Beom Seok Kim et al.

APPLIED PHYSICS LETTERS (2014)

添加到收藏夹

Article Thermodynamics

An experimental method to simultaneously measure the dynamics and heat transfer associated with a single bubble during nucleate boiling on a horizontal surface

Satbyoul Jung et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Role of Wickability on the Critical Heat Flux of Structured Superhydrophilic Surfaces

Md Mahamudur Rahman et al.

LANGMUIR (2014)

添加到收藏夹

Article Nuclear Science & Technology

Measurement of wetted area fraction in subcooled pool boiling of water using infrared thermography

Hyungdae Kim et al.

NUCLEAR ENGINEERING AND DESIGN (2013)

添加到收藏夹

Article Physics, Applied

Structured surfaces for enhanced pool boiling heat transfer

Kuang-Han Chu et al.

APPLIED PHYSICS LETTERS (2012)

添加到收藏夹

Article Thermodynamics

The effect of water absorption on critical heat flux enhancement during pool boiling

Ho Seon Ahn et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2012)

添加到收藏夹

Article Physics, Applied

Effect of nanoparticle deposition on capillary wicking that influences the critical heat flux in nanofluids

Hyung Dae Kim et al.

APPLIED PHYSICS LETTERS (2007)

添加到收藏夹

Article Thermodynamics

A theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation

SG Kandlikar

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.