4.6 Article

Preparation and characterization of nano- Fe(OH)3, its composites with two natural zeolites, and granulation of them for nitrate removal from polluted water

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Green & Sustainable Science & Technology

Highly robust ZrO2-stabilized CaO nanoadsorbent prepared via a facile one-pot MWCNT-template method for CO2 capture under realistic calcium looping conditions

Seyed Borhan Mousavi et al.

Summary: This study assessed the textural and structural characterizations and CO2 capture activity of ZrO2-stabilized adsorbents templated with MWCNT. The results showed that adding 10 wt% MWCNT significantly improved the grain size, surface area, and pore volume of CaO. The incorporation of MWCNT also increased cyclic durability and CO2 capture capacity.

JOURNAL OF CLEANER PRODUCTION (2023)

Article Engineering, Chemical

The effect of heat transfer characteristics of macromolecule fouling on heat exchanger surface: A dynamic simulation study

Zahra Karimi Shoar et al.

Summary: At CGSs, natural gas is heated by a heater to prevent hydrate formation in the throttle valve. Heat exchangers are essential in industrial processes and fouling was dynamically simulated in this study. Different operating conditions were evaluated for their effects on fouling growth.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2023)

Article Environmental Sciences

Arsenate removal from contaminated water using Fe2O3-clinoptilolite powder and granule

Maryam Tahmasebpoor et al.

Summary: Fe-Clin granules, obtained by modifying clinoptilolite with iron oxide, exhibit enhanced affinity towards arsenic pollutant and can be widely used within a wide range of pH. These granules can remove As(V) in a very short amount of time and have a high adsorption capacity.

ENVIRONMENTAL TECHNOLOGY (2022)

Article Environmental Sciences

Nitrates in the environment: A critical review of their distribution, sensing techniques, ecological effects and remediation

Simranjeet Singh et al.

Summary: Nitrate pollution is a growing concern, impacting both organisms and human health. Sensing nitrate is an effective way to monitor nitrate distribution in water bodies. Estimating nitrate contamination from different sources and using various techniques for nitrate removal can effectively improve environmental quality.

CHEMOSPHERE (2022)

Article Chemistry, Physical

Involvement of ethylene carbonate on the enhancement H+ carriers in structural and ionic conduction performance on alginate bio-based polymer electrolytes

A. F. Fuzlin et al.

Summary: This study investigates the effects of ethylene carbonate (EC) on the structural and ionic conduction performance of bio-based polymer electrolytes. The researchers successfully prepared electrolytes with improved ionic conduction performance using the solution casting technique, and found that the addition of an appropriate amount of ethylene carbonate can enhance the amorphous phase and thermal stability.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Alginate encapsulated nanobio-hybrid system enables improvement of photocatalytic biohydrogen production in the presence of oxygen

Balasubramani Ramprakash et al.

Summary: Bacterial encapsulation is a novel biotechnological strategy for generating fuels and valuable chemicals. In this study, an optimal alginate encapsulated TiO2/Escherichia coli hybrid system was established to efficiently produce hydrogen under visible light. The encapsulated system exhibited enhanced hydrogen production even in the presence of oxygen.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Engineering, Environmental

Synthesis of coal-analcime composite from coal gangue and its adsorption performance on heavy metal ions

Yuxuan Jin et al.

Summary: A novel coal-analcime composite adsorbent was successfully synthesized from coal gangue, enhancing the adsorption capacity of analcime for heavy metal ions. The modified coal loaded on the surface of analcime significantly improved the chemo-adsorption between heavy metal ions and the composite, with a maximum Pb2+ exchange capacity of 268 mg/g achieved.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Chemical

Preparation of Al2O3-2SiO2/geopolymer powder by hydrolytic sol-gel method and its activity characterization and research on the reaction mechanism

Sihao Chen et al.

Summary: This study reports the application of sol-gel method for the preparation of a new type of highly active Al2O3-2SiO(2) geopolymer precursor powder. The synthesized geopolymer precursor powder exhibited amorphous crystal structure and consistent FTIR absorption peaks. The activity of geopolymers powders increased with increasing the amount of water, as revealed by changes in conductivity and the concentration of aluminum and silicon ions.

POWDER TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Post-synthesis fluoride treatment of Analcime zeolite synthesized using a novel organic template. Crystalline, textural, and acid study

Nadjat Chouat et al.

Summary: ANA-type zeolites were prepared using N,N-dimethylaniline as an organic template, and post-fluorination treatment resulted in additional mesoporosity and increased acidity, as confirmed by XRD, BET, and MeOH adsorption characterization.

RESEARCH ON CHEMICAL INTERMEDIATES (2022)

Article Environmental Sciences

Adsorption isotherms and kinetics for the removal of algal organic matter by granular activated carbon

Ziming Zhao et al.

Summary: In this study, the relative removal efficiency of AOM and humic acid by granular activated carbon (GAC) adsorption was determined through batch experiments. The adsorption data fit Freundlich isotherm models and pseudo-second order kinetic models well. Thermodynamic parameters indicated that GAC adsorption for DOM removal was endothermic and spontaneous.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Chemistry, Applied

Synthesis and catalytic performance of Linde-type A zeolite (LTA) from coal fly ash utilizing microwave and ultrasound collaborative activation method

Wenting Chen et al.

Summary: In this study, pure LTA zeolites of high crystallinity were synthesized from coal fly ash using a method of microwave and ultrasound collaborative activation (MUCA) for the first time. The MUCA method showed higher efficiency in dissolving silica-aluminum species from fly ash while avoiding the digestion of impurities, resulting in reduced energy consumption. The morphology of the LTA products could be adjusted by tuning parameters such as liquid-solid ratio or crystallization time. Additionally, mesoporous LTA zeolite was prepared without the addition of other templates, exhibiting improved catalytic cracking ability.

CATALYSIS TODAY (2022)

Article Chemistry, Applied

Direct single-step synthesis of phase pure zeolite Na-P1, hydroxy sodalite and analcime from coal fly ash and assessment of their Cs+ and Sr2+ removal efficiencies

M. Mahima Kumar et al.

Summary: This study focuses on the synthesis of phase pure zeolites from coal fly ash and its use as adsorbents to remove Cs+ and Sr2+ ions from nuclear waste solutions. The results show that zeolite Na-P1 has a higher adsorption capacity for Cs+ and Sr2+ ions compared to analcime and hydroxy sodalite.

MICROPOROUS AND MESOPOROUS MATERIALS (2022)

Article Engineering, Chemical

Nitrate adsorption and desorption during biological ion exchange

Michael Edgar et al.

Summary: This study aimed to evaluate the impact of organic acids, natural organic matter (NOM), and buffer solutions on biological ion exchange (BIEX), and found that higher molecular weight and carbohydrate compositions in organic acids and NOM can enhance the separation of NO3- on ion exchange resins. Batch denitrification experiments further revealed that inorganic ions and organic compounds facilitate NO3- displacement from the resins and subsequent aqueous phase denitrification.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Environmental

Evaluating the relative adsorption and biodegradation of 2-methylisobor-neol and geosmin across granular activated carbon filter-adsorbers

Jie Yuan et al.

Summary: This study investigated the contributions of adsorption and biodegradation to the removal of MIB and geosmin in GAC harvested from drinking water treatment plants in the Great Lakes region. It was found that GAC had significant adsorption and biodegradation capacity, and C-14-glucose respiration rate was identified as a potential indicator for GAC biodegradative capacity. Non-targeted screening analysis also identified potential biodegradation products. The findings of this study provide valuable insights for better understanding the use of GAC in water treatment.

WATER RESEARCH (2022)

Review Environmental Sciences

Nitrate Water Contamination from Industrial Activities and Complete Denitrification as a Remediation Option

Karabelo M. Moloantoa et al.

Summary: This article introduces a method using bacteria for complete denitrification, aiming to produce nitrogen gas as a terminal byproduct and mitigate nitrogen pollution in wastewater. The synergistic interaction of different bacteria and the optimization of their enzymatic activities are highlighted.
Article Engineering, Environmental

Synthesis of a granular composite based on polyvinyl alcohol-Fe:Ce bimetallic oxide particles for the selective adsorption of As(V) from water

L. E. Rios-Saldana et al.

Summary: In this study, Fe:Ce bimetallic oxide particles (BOP) were immobilized in poly(vinyl) alcohol (PVA) hydrogel to create a composite material that retains the adsorptive properties of BOP powder. The composite showed excellent physicochemical properties and high arsenic adsorption capacity. It also exhibited uniform dispersion of BOP particles, large surface area, and suitability for packed bed systems.

JOURNAL OF WATER PROCESS ENGINEERING (2022)

Article Energy & Fuels

Numerical investigation of TiO2 and MWCNTs turbine meter oil nanofluids: Flow and hydrodynamic properties

Atiyeh Aghaei Sarvari et al.

Summary: The present study evaluates the influence of multi-walled carbon nanotubes (MWCNTs) and TiO2 nanoparticles (NPs) on lubricant and fluid flow within natural gas turbine meters. Experimental and simulation results show that the presence of nanoparticles increases pressure drop, with higher concentrations and volume flow rates resulting in larger pressure drop values. Additionally, the friction coefficient is directly and inversely proportional to NPs concentration and volume flow rates, respectively.
Article Chemistry, Multidisciplinary

The Synergistic Effect of Intumescent Fire-Resistive Paint Containing TiO2 Nanoparticles and Chlorinated Paraffin onto Atmospheric-Metallic Substrates

Elahe Sobhani et al.

Summary: This research investigates the impact of different formulations of paints on atmospheric-metallic substrates, and finds that the simultaneous use of TiO2 nanoparticles and chlorinated paraffin produces the best fireproof paint.

CHEMISTRYSELECT (2022)

Article Physics, Multidisciplinary

Porous cage-like microfiber of fly ash magnetic powder (CMS)/polyaniline (PANI) composites with absorption properties

Dawei Li et al.

Summary: This study prepared magnetic adsorbents with recycling properties by using fly ash magnetic powder-doped polyaniline microfiber composites. The results showed that the magnetic adsorbent exhibited excellent adsorption capacities for various wastewater samples and different ions. The adsorption process followed the Langmuir isotherm model and the quasi-secondary kinetic model.

PHYSICA SCRIPTA (2022)

Article Chemistry, Physical

Investigation of H2O2/UV advanced oxidation process on the removal rate of coliforms from the industrial effluent: A pilot-scale study

Meisam Ashrafivala et al.

Summary: Wastewater recycling and reuse are particularly important in countries with water scarcity issues, and disinfection is a crucial step in achieving this goal. This research investigates the use of the advanced oxidation process combining UV and H2O2 for fecal coliform inactivation in industrial effluent. Optimal disinfection conditions were determined based on parameters such as pH, H2O2 concentration, and contact time. The results show that acidic conditions, increased H2O2 concentration, and longer contact time contribute to higher inactivation rates. The combined UV/H2O2 process is more effective than using UV or H2O2 alone and can meet irrigation standards.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Engineering, Environmental

Preparation and assessment of granular substrate from wastewater post-coagulation sludge towards maximum phosphate adsorption and erosion wear resistance

Mengyue Wang et al.

Summary: Wastewater post-coagulation sludge can be reused as desirable adsorbents. A granular substrate prepared by co-pyrolyzing the sludge with bentonite and corncob showed strong adsorption capacity and selectivity.

RESOURCES CONSERVATION AND RECYCLING (2022)

Article Multidisciplinary Sciences

Optimizing the heat transfer characteristics of MWCNTs and TiO2 water-based nanofluids through a novel designed pilot-scale setup

Reza Javadpour et al.

Summary: This study investigates the effect of titanium dioxide (TiO2) nano additives on the thermal performance of a pilot-scale cross-flow cooling tower. The findings reveal that the addition of nanoparticles improves the heat transfer characteristics of the working fluid. Furthermore, it is found that multi-walled carbon nanotubes (MWCNTs) enhance the thermal features better than TiO2.

SCIENTIFIC REPORTS (2022)

Article Chemistry, Multidisciplinary

The Catalytic Reduction of Nitroanilines Using Synthesized CuFe2O4 Nanoparticles in an Aqueous Medium

Samin Naghash-Hamed et al.

Summary: The study synthesized CuFe2O4 nanoparticles as catalysts for the efficient reduction of nitroanilines, showcasing excellent catalytic performance in converting nitroanilines into corresponding amino compounds. Additionally, the prepared nanoparticles exhibited the ability to be reused multiple times, showing great potential for practical applications.

CHEMISTRYOPEN (2022)

Article Nanoscience & Nanotechnology

Facile copper ferrite/carbon quantum dot magnetic nanocomposite as an effective nanocatalyst for reduction of para-nitroaniline and ortho-nitroaniline

Samin Naghash-Hamed et al.

Summary: In this study, a novel magnetic nanocomposite containing copper ferrite and gelatin-derived carbon quantum dots was synthesized and showed excellent catalytic performance in the reduction of highly toxic contaminants PNA and ONA. The nanocatalyst could be easily separated and recycled without significant loss of catalytic activity.

NANO FUTURES (2022)

Article Engineering, Environmental

Ca/Fe-layered double hydroxide-zeolite composites for the control of phosphorus pollution in sediments: Performance, mechanisms, and microbial community response

Yihong Wu et al.

Summary: Ca/Fe-LDH loaded onto natural zeolite (NZ) was effective in adsorbing phosphorus, reducing its concentration in contaminated sediments. CFL-Z capping sediments exhibited better inhibition of sediment P release compared to CFL-Z amendment sediments. The presence of CFL-Z also reshaped the microbial community structure, with different bacteria influencing the stability of sediment P.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Thermodynamics

The novel Carbon Nanotube-assisted development of highly porous CaZrO3-CaO xerogel with boosted sorption activity towards high-temperature cyclic CO2 capture

Mohammad Heidari et al.

Summary: In this study, for the first time, carbon nanotubes were used as an auxiliary additive to enhance the textural and structural features and CO2 capture potential of CaZrO3-CaO adsorbents. After multiple cycles of testing, CaO nanoadsorbents with 5 wt.% carbon nanotubes showed the best CO2 capture capacity.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Chemistry, Physical

Sodium alginate assisted preparation of oxygen-doped microporous carbons with enhanced electrochemical energy storage and hydrogen uptake

Wenqiang Hu et al.

Summary: Microporous carbons with large oxygen content were successfully synthesized from biomass using a sodium alginate assisted strategy. These materials exhibited high specific surface area and large pore volume, high specific capacitance and capacity stability as supercapacitor electrodes, and enhanced hydrogen storage capacity as hydrogen storage materials.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Environmental Sciences

Separation of pollutants from aqueous solution using nanoclay and its nanocomposites: A review

Suvendu Manna et al.

Summary: Clay nanocomposites are commonly used adsorbents for separating various types of pollutants, as they are relatively inexpensive, easy to use, and require low maintenance. While they show promise, further research on real wastewater and pilot-scale studies are recommended to explore their large-scale wastewater treatment capabilities.

CHEMOSPHERE (2021)

Article Thermodynamics

Complex Fabrication of Zr4+, La3+, and Ce3+ Coordinated Alginate-Assisted Bentonite-Based Hybrid Beads for Nitrate Removal

Ilango Aswin Kumar et al.

Summary: In this study, Zr4+, La3+, and Ce3+ linked Alg/BT composites were developed for nitrate removal with enriched sorption capacity. Various instrumentation processes were utilized to analyze the beads properties, parameters for adsorption were optimized, and the field applicability of the beads was explored.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2021)

Article Physics, Multidisciplinary

Adsorption of the eosin yellow dye by nickel oxide nanoparticles catalyzes via oxalate co-precipitation method: isotherm, kinetic and thermodynamic studies

Um-Salama B. Mahmood et al.

Summary: In this study, nickel oxide nanoparticles were used for the adsorption of eosin yellow dye from an aqueous solution. The maximum removal efficiency was found to be 98.6% at pH 4, temperature 20°C, initial dye concentration 10 ppm, and adsorbent dosage 0.05g within 25 minutes. The adsorption process followed the Langmuir isotherm model and pseudo-second-order kinetic model, with thermodynamic factors indicating an endothermic, non-spontaneous, and chemisorption process.

PHYSICA SCRIPTA (2021)

Review Environmental Sciences

Various electron donors for biological nitrate removal: A review

Yunmeng Pang et al.

Summary: This paper discusses the issue of nitrate pollution in water and wastewater, as well as the use of various electron donors for biological denitrification. Depending on the types of electron donors, denitrification can be classified into heterotrophic and autotrophic denitrification.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Chemistry, Multidisciplinary

CO2 capture activity of a novel CaO adsorbent stabilized with (ZrO2+Al2O3+CeO2)-based additive under mild and realistic calcium looping conditions

Mohammad Heidari et al.

Summary: The study focused on developing a novel synthetic adsorbent using the sol-gel autocombustion method, incorporating ZrO2, Al2O3, and CeO2 during the development of CaO adsorbent. The research found that the adsorbent with a molar ratio of 20/1 of calcium precursor to promoters showed the best performance, with the highest sorption capacity and CaO conversion rate. Additionally, the cyclic performance of modified adsorbents was found to be directly proportional to their morphological properties, with CN/20 demonstrating the best overall performance in capturing CO2.

JOURNAL OF CO2 UTILIZATION (2021)

Article Chemistry, Physical

The impact of SiC, Al2O3, and B2O3 abrasive particles and temperature on wear characteristics of 18Ni (300) maraging steel in abrasive flow machining (AFM)

Seyed Shahin Seyedi et al.

Summary: This research investigated the impact of temperature on surface roughness and material removal rate using a one-way abrasive flow machining with SiC, Al2O3, and B2O3 particles as abrasive particles. The findings showed that media containing Al2O3 particles had higher surface roughness, and material removal rate decreased as temperature decreased.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Engineering, Chemical

Prospect of clay-based flexible adsorbent coatings as cleaner production technique in wastewater treatment, challenges, and issues: A review

Syahida Farhan Azha et al.

Summary: Using adsorption technology to treat wastewater is an effective strategy to address water scarcity issues, but requires a proactive environmental strategy to enhance sustainability. The innovative low-cost adsorbent coating technology shows potential in industrial wastewater treatment, and the selection of suitable adsorbents is crucial for efficiency.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Article Engineering, Chemical

Facile synthesis of clinoptilolite-supported Ag/TiO2 nanocomposites for visible-light degradation of xanthates

Pengfei Zhou et al.

Summary: The novel ternary Ag/TiO2/clinoptilolite (ATC) nanocomposite exhibits excellent photocatalytic performance for degrading xanthates, with enhanced adsorption capacity, visible-light absorption range, and charge separation efficiency. The possible photodegradation mechanism was proposed based on real-time spectral evolution, trapping experiment, and UV-vis DRS results.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Article Environmental Sciences

Application of adsorption process for effective removal of emerging contaminants from water and wastewater

B. Senthil Rathi et al.

Summary: Emerging pollutants in the marine ecosystem are becoming a growing concern, as traditional wastewater treatment plants are not able to completely remove these contaminants, leading to the need for cost-effective additional water treatment methods. Adsorption is a successful method for contaminant removal globally, due to its low cost, high performance, and simple design.

ENVIRONMENTAL POLLUTION (2021)

Article Energy & Fuels

Viscosity, tribological and physicochemical features of ZnO and MoS2 diesel oil-based nanofluids: An experimental study

Seyed Borhan Mousavi et al.

Summary: The study investigated the effects of temperature and nanoparticle content on the viscosity, tribological properties, and physicochemical features of diesel oil-based nanofluids. ZnO and MoS2 nanoparticles were found to enhance the tribological characteristics of pure diesel oil. The addition of nanoparticles also increased the pumping power.
Article Engineering, Environmental

Template-assisted Cu2O@Fe(OH)3 yolk-shell nanocages as biomimetic peroxidase: A multi-colorimetry and ratiometric fluorescence separated-type immunosensor for the detection of ochratoxin A

Hongshuai Zhu et al.

Summary: A dual-modal multi-colorimetric and ratiometric fluorescence immunosensor for the sensitive detection of ochratoxin A was successfully developed based on the catalytic activity of Cu2O@Fe(OH)3 yolk-shell nanocages. The sensor showed improved performance with a broad linear detection range and low detection limit, and it was successfully applied for OTA monitoring in millet and lake water samples.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Physics, Multidisciplinary

Evaluation of palm kernel shell biochar for the adsorption of Bacillus cereus

Aaronn Avit Ajeng et al.

Summary: The study found that PKS biochar is a suitable carrier for B. cereus inoculation, with high adsorption capacity and rate, achieving 90% maximum adsorption within 60 minutes. It is suitable for two isotherm models and shows conformity to Elovich model in kinetic study.

PHYSICA SCRIPTA (2021)

Article Engineering, Environmental

Biodiesel synthesis using clinoptilolite-Fe3O4-based phosphomolybdic acid as a novel magnetic green catalyst from salvia mirzayanii oil via electrolysis method: Optimization study by Taguchi method

Maryam Helmi et al.

Summary: The objective of the study was the synthesis of biodiesel from salvia mirzayanii oil using phosphomolybdic acid (HPA) supported on clinoptilolite Fe3O4. The catalyst properties were determined through various analyses, and the biodiesel yield was optimized under set conditions. The analysis showed that the synthesized biodiesel had properties similar to diesel, indicating the economic and suitable nature of the electrolysis method.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Enhanced nitrate removal by physical activation and Mg/Al layered double hydroxide modified biochar derived from wood waste: Adsorption characteristics and mechanisms

Tongtong Wang et al.

Summary: The study demonstrated that the modified composite biochar shows good adsorption performance for nitrate wastewater, with significantly increased adsorption capacity and removal rate. The adsorption mechanisms involve various physical-chemical composite processes such as surface adsorption, diffusion, and ion exchange.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Review Nutrition & Dietetics

Nitrate-nitrite exposure through drinking water and diet and risk of colorectal cancer: A systematic review and meta-analysis of observational studies

Fatemeh Hosseini et al.

Summary: A dose-response meta-analysis of observational studies found a positive association between dietary nitrate intake and risk of colorectal cancer, while nitrite from diet and nitrate from drinking water were not significantly associated with colorectal cancer risk.

CLINICAL NUTRITION (2021)

Article Engineering, Environmental

Nitrate removal from reverse osmosis concentrate in pilot-scale open-water unit process wetlands

Rachel C. Scholes et al.

Summary: This study demonstrates the potential of using open-water unit process wetlands for removing nitrate from RO concentrate, with woodchip amendments significantly increasing nitrate removal rates. The results suggest that low-cost carbon amendments can enhance treatment efficiency and reduce the land area needed for nitrate treatment.

ENVIRONMENTAL SCIENCE-WATER RESEARCH & TECHNOLOGY (2021)

Article Engineering, Environmental

Ammonium removal using a calcined natural zeolite modified with sodium nitrate

Hailu Fu et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Chemical

Synthesis of magnetic nickel ferrites nanocomposites: An advanced remediation of electroplating wastewater

Bharti Verma et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Article Chemistry, Physical

Experimental investigation of ZnO nanoparticles effects on thermophysical and tribological properties of diesel oil

Seyed Borhan Mousavi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Engineering, Environmental

Phosphorus adsorption behaviors of MgO modified biochars derived from waste woody biomass resources

Oluwatosin Oginni et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Biochemistry & Molecular Biology

Characterization of functionalized chitosan-clinoptilolite nanocomposites for nitrate removal from aqueous media

Fatemeh Yazdi et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Article Chemistry, Applied

Surfactant-modified MFI-type nanozeolites: Super-adsorbents for nitrate removal from contaminated water

Layla El Hanache et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2019)

Article Thermodynamics

Experimental investigation of MoS2/diesel oil nanofluid thermophysical and rheological properties

Seyed Borhan Mousavi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Article Engineering, Environmental

Ultrasound assisted co-precipitation synthesis of Fe3O4/bentonite nanocomposite: Performance for nitrate, BOD and COD water treatment

Maasumeh Khatamian et al.

JOURNAL OF WATER PROCESS ENGINEERING (2019)

Article Environmental Sciences

Study on the influence of surface potential on the nitrate adsorption capacity of metal modified biochar

Li Long et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Green & Sustainable Science & Technology

Removal of nitrate and phosphate by chitosan composited beads derived from crude oil refinery waste: Sorption and cost-benefit analysis

Xiaoqiang Cui et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Chemistry, Multidisciplinary

Activated sludge-loaded polyvinyl alcohol microparticles for starch wastewater treatment in an airlift bioreactor

Slobodan Cvetkovic et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2018)

Article Environmental Sciences

Does the groundwater nitrate pollution in China pose a risk to human health? A critical review of published data

Yuanzheng Zhai et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)

Article Chemistry, Physical

Addition of a foaming agent to improve N2 gas permeability of PVA/alginate carriers for deammonification process

Daehee Choi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Multidisciplinary

Characterization of CPs/Ca-exchanged FAU- and LTA-type zeolite nanocomposites and their selectivity for CO2 and N2 adsorption

Samira Salehi et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2017)

Article Engineering, Chemical

Insight into the adsorption kinetics models for the removal of contaminants from aqueous solutions

K. L. Tan et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Article Biochemistry & Molecular Biology

Chitosan /Zeolite Y/Nano ZrO2 nanocomposite as an adsorbent for the removal of nitrate from the aqueous solution

Abbas Teimouri et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Article Engineering, Chemical

Kinetic studies of heavy metals biosorption by acidogenic biomass immobilized in clinoptilolite

G. M. Figueroa-Torres et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)

Article Chemistry, Physical

Nitrate adsorption from aqueous solution using granular chitosan-Fe3+ complex

Qili Hu et al.

APPLIED SURFACE SCIENCE (2015)

Article Engineering, Environmental

Uranium removal from groundwater by natural clinoptilolite zeolite: Effects of pH and initial feed concentration

Lucy Mar Camacho et al.

JOURNAL OF HAZARDOUS MATERIALS (2010)

Article Chemistry, Physical

Kinetic study of adsorption of Cu(II) and Pb(II) from aqueous solutions using manganese oxide coated zeolite in batch mode

Weihua Zou et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2006)

Article Environmental Sciences

Effects of pretreatment on physical and ion exchange properties of natural clinoptilolite

VJ Inglezakis et al.

ENVIRONMENTAL TECHNOLOGY (2001)