☆ 4.6 Article

High-efficiency α-FAPbI3 perovskite solar cells based on one-dimensional TiO2 nanorod array scaffolds

ORGANIC ELECTRONICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Improved mixed-dimensional 3D/2D perovskite layer with formamidinium bromide salt for highly efficient and stable perovskite solar cells

Mustafa K. A. Mohammed et al.

Summary: The research focuses on improving the stability and efficiency of perovskite solar cells (PSCs) through the fabrication of a 3D/2D heterostructure layer and the introduction of FABr additive. Results show that the PCE of PSCs can be increased significantly with the FABr modification, indicating a practical step towards PSC development.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Stability-limiting heterointerfaces of perovskite photovoltaics

Shaun Tan et al.

Summary: Optoelectronic devices rely on heterointerfaces between different semiconducting materials, and the energy-level alignment between them plays a crucial role in device performance. Surface treatments for perovskite solar cells can impact the energetics of the heterointerface, potentially affecting device stability. Balancing the pros and cons of surface treatments is essential for improving PSC stability.

NATURE (2022)

添加到收藏夹

Review Multidisciplinary Sciences

Rethinking the A cation in halide perovskites

Jin-Wook Lee et al.

Summary: The A cation in ABX(3) organic-inorganic lead halide perovskites (OLHPs) was conventionally believed to hardly affect their optoelectronic properties. However, recent developments have revealed the critical role of the A cation in regulating the physicochemical and optoelectronic properties of OLHPs.

SCIENCE (2022)

添加到收藏夹

Article Energy & Fuels

Improving the properties of MA-based wide-bandgap perovskite by simple precursor salts engineering for efficiency and ambient stability improvement in solar cells

Jadel Tsiba Matondo et al.

Summary: This study developed a method to optimize the perovskite films by reducing grain boundaries and improving crystallinity using CsCl. The resulting films showed higher carrier lifetime and mobility, reduced carrier trap states, and improved performance of solar cells.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Roles of MACl in Sequentially Deposited Bromine-Free Perovskite Absorbers for Efficient Solar Cells

Feihong Ye et al.

Summary: This study systematically investigated the role of MACl in sequentially deposited Br-free FA-based perovskites, revealing that MACl can regulate the reaction, phase transition, and crystallization. Compared to traditional FAPbI(3), perovskites with MACl exhibit superior performance in terms of grain size, carrier lifetime, and trap density.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Hydrogen peroxide-modified SnO2 as electron transport layer for perovskite solar cells with efficiency exceeding 22%

Haibing Wang et al.

Summary: The addition of hydrogen peroxide into the SnO2 precursor solution enables the formation of a film with lower trap density, improved electrical conductivity, and better energy level alignment, leading to enhanced performance and stability of perovskite solar cells.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Regulating the crystalline phase of intermediate films enables FA1-xMAxPbI3 perovskite solar cells with efficiency over 22%

Fa-Zheng Qiu et al.

Summary: The study demonstrates that FA(1-x)MA(x)PbI(3) perovskite intermediate films prepared using the sequential deposition method at room temperature exhibit superior performance and can achieve high efficiency in solar cells. Furthermore, after aging for 1200 hours in ambient air, unencapsulated devices still maintain a high efficiency.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrafast transformation of PbI2 in two-step fabrication of halide perovskite films for long-term performance and stability via nanosecond laser shock annealing

Huanrui Yang et al.

Summary: The two-step sequential deposition method is reliable for synthesizing large-area and high-quality perovskite films, but the slow transformation of PbI2 to perovskites affects long-term performance and stability. A nanosecond laser shock annealing process induces ultrafast diffusion of organic salt into the PbI2 layer, modulating crystalline structure and electron transport kinetics in the fabricated films. This method enhances band structure changes and improves carrier lifetime, resulting in higher responsivity and detectivity.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Low-Temperature Aging Provides 22% Efficient Bromine-Free and Passivation Layer-Free Planar Perovskite Solar Cells

Xin Wang et al.

NANO-MICRO LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Enhanced performance of CH3NH3PbI3 perovskite solar cells via interface modification using phenyl ammonium iodide derivatives

Farzaneh S. Ghoreishi et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Phenethylammonium Functionalization Enhances Near-Surface Carrier Diffusion in Hybrid Perovskites

Ti Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells

Gwisu Kim et al.

SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Defect and Contact Passivation for Perovskite Solar Cells

Erkan Aydin et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Rutile TiO2 Electron Transport Layer for the Enhancement of Charge Collection for Efficient Perovskite Solar Cells

Yongling Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

添加到收藏夹

Article Chemistry, Physical

A facile method to produce TiO2 nanorods for high-efficiency dye solar cells

Jingshu Wan et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide

Hanul Min et al.

SCIENCE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Synthetic Approaches for Halide Perovskite Thin Films

Wiley A. Dunlap-Shohl et al.

CHEMICAL REVIEWS (2019)

添加到收藏夹

Article Chemistry, Physical

Interface modification by a multifunctional ammonium salt for high performance and stable planar perovskite solar cells

Shuo Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering

Chenxin Ran et al.

CHEMICAL SOCIETY REVIEWS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of HCl etching on TiO2 nanorod-based perovskite solar cells

QingWen Yue et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Significantly improved black phase stability of FAPbI(3) nanowires via spatially confined vapor phase growth in nanoporous templates

Leilei Gu et al.

NANOSCALE (2018)

添加到收藏夹

Editorial Material Chemistry, Physical

How To Correctly Determine the Band Gap Energy of Modified Semiconductor Photocatalysts Based on UV-Vis Spectra

Patrycja Makula et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

添加到收藏夹

Article Energy & Fuels

Efficient two-terminal all-perovskite tandem solar cells enabled by high-quality low-bandgap absorber layers

Dewei Zhao et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

A highly stable and efficient carbon electrode-based perovskite solar cell achieved via interfacial growth of 2D PEA(2)PbI(4) perovskite

Kisu Lee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Review Nanoscience & Nanotechnology

Understanding the physical properties of hybrid perovskites for photovoltaic applications

Jinsong Huang et al.

NATURE REVIEWS MATERIALS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals

Dong Shi et al.

SCIENCE (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.