相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Conventional and Metal Oxide-Based Inverted Polymer Solar Cells: A Comparative Experimental Study
Said Karim Shah et al.
JOURNAL OF ELECTRONIC MATERIALS (2023)
Tandem Organic Solar Cell with 20.2% Efficiency
Zhong Zheng et al.
JOULE (2022)
Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology
Lei Zhu et al.
NATURE MATERIALS (2022)
Simulation and Experimental Device Performance Analysis of TiO2Based Inverted Organic Solar Cells
Khadija Bibi et al.
JOURNAL OF ELECTRONIC MATERIALS (2022)
Morphological variations of ZnO nanostructures and its influence on the photovoltaic performance when used as photoanodes in dye sensitized solar cells
Prami Nandi et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)
Thickness Optimization of Thin-Film Tandem Organic Solar Cell
Kamran Ali Bangash et al.
MICROMACHINES (2021)
Efficient Method of Fabricating Polymeric Solar Cells in Multilayered Configuration Using Electrospray
Said Karim Shah et al.
JOURNAL OF ELECTRONIC MATERIALS (2020)
Combined optical-electrical modeling of perovskite solar cell with an optimized design
T. Bendib et al.
OPTICAL MATERIALS (2020)
Fabrication of bulk heterojunction organic solar cells with different configurations using electrospray
S. K. Shah
NANO EXPRESS (2020)
The damaging effects of the acidity in PEDOT:PSS on semiconductor device performance and solutions based on non-acidic alternatives
Joseph Cameron et al.
MATERIALS HORIZONS (2020)
Numerical analysis of the back interface for high efficiency wide band gap chalcopyrite solar cells
Weimin Li et al.
SOLAR ENERGY (2019)
Effect of TiO2 interlayer on the performance of inverted polymeric solar cells
Said Karim Shah et al.
MATERIALS RESEARCH EXPRESS (2019)
Quantitative relations between interaction parameter, miscibility and function in organic solar cells
Long Ye et al.
NATURE MATERIALS (2018)
Numerical modelisation of ZnO interfacial layer on P3HT:PCBM based organic photovoltaic bulk heterojunction devices
Chahrazed Bendenia et al.
OPTIK (2018)
High-Efficiency Nonfullerene Organic Solar Cells: Critical Factors that Affect Complex Multi-Length Scale Morphology and Device Performance
Long Ye et al.
ADVANCED ENERGY MATERIALS (2017)
Prospects of e-beam evaporated molybdenum oxide as a hole transport layer for perovskite solar cells
F. Ali et al.
JOURNAL OF APPLIED PHYSICS (2017)
Highly stable inverted organic photovoltaic cells with a V2O5 hole transport layer
Muhammad Zafar et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2017)
Modeling and analysis of HTM-free perovskite solar cells based on ZnO electron transport layer
Lingyan Lin et al.
SUPERLATTICES AND MICROSTRUCTURES (2017)
Stability enhancement of polymer solar cells in trilayer configuration
Said Karim Shah et al.
THIN SOLID FILMS (2017)
Enhanced efficiency of organic solar cells by using ZnO as an electron-transport layer
Irfan Ullah et al.
MATERIALS RESEARCH EXPRESS (2017)
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
Michiru Nishita et al.
SCIENTIFIC REPORTS (2017)
Optimization of active-layer thickness, top electrode and annealing temperature for polymetric solar cells
Said Karim Shah et al.
AIMS MATERIALS SCIENCE (2017)
Low temperature aqueous solution-processed Li doped ZnO buffer layers for high performance inverted organic solar cells
Zhenhua Lin et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Effect of leakage current and shunt resistance on the light intensity dependence of organic solar cells
Christopher M. Proctor et al.
APPLIED PHYSICS LETTERS (2015)
Solution-processed inverted organic solar cell using V2O5 hole transport layer and vacuum free EGaIn anode
Fatih Ongul
OPTICAL MATERIALS (2015)
Fabrication of inverted bulk heterojunction organic solar cells based on conjugated P3HT:PCBM using various thicknesses of ZnO buffer layer
M. Z. Sahdan et al.
OPTIK (2015)
The Enhanced Formaldehyde-Sensing Properties of P3HT-ZnO Hybrid Thin Film OTFT Sensor and Further Insight into Its Stability
Huiling Tai et al.
SENSORS (2015)
Hole-conductor-free perovskite organic lead iodide heterojunction thin-film solar cells: High efficiency and junction property
Jiangjian Shi et al.
APPLIED PHYSICS LETTERS (2014)
Numerical simulation: Toward the design of high-efficiency planar perovskite solar cells
Feng Liu et al.
APPLIED PHYSICS LETTERS (2014)
Assessing the early degradation of photovoltaic modules performance in the Saharan region
Nabil Kahoul et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Universal and Versatile MoO3-Based Hole Transport Layers for Efficient and Stable Polymer Solar Cells
Xiaotian Hu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Optimal construction parameters of electrosprayed trilayer organic photovoltaic devices
S. K. Shah et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
The numerical calculation of single-diode solar-cell modelling parameters
F. Ghani et al.
RENEWABLE ENERGY (2014)
Enhanced inverted organic solar cell performance by post-treatments of solution-processed ZnO buffer layers
Zhenhua Lin et al.
RSC ADVANCES (2014)
Highly efficient uniform ZnO nanostructures for an electron transport layer of inverted organic solar cells
Sarah Kim et al.
CHEMICAL COMMUNICATIONS (2013)
Impurity-related degradation in a prototype organic photovoltaic material: A first-principles study
G. Volonakis et al.
ORGANIC ELECTRONICS (2013)
Effects of the Morphology of a ZnO Buffer Layer on the Photovoltaic Performance of Inverted Polymer Solar Cells
Zhiqiang Liang et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Chemically modified graphene oxides as a hole transport layer in organic solar cells
Dong Yang et al.
CHEMICAL COMMUNICATIONS (2012)
Influences of Surface Roughness of ZnO Electron Transport Layer on the Photovoltaic Performance of Organic Inverted Solar Cells
Zaifei Ma et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Realization of solution processed multi-layer bulk heterojunction organic solar cells by electro-spray deposition
Mushtaq Ali et al.
ORGANIC ELECTRONICS (2012)
Oxygen doping-induced photogeneration loss in P3HT:PCBM solar cells
Antonio Guerrero et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Temperature dependence of solar cell performance-an analysis
Priyanka Singh et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Inverted Polymer Solar Cells with Reduced Interface Recombination
Song Chen et al.
ADVANCED ENERGY MATERIALS (2012)
Rapid phase segregation of P3HT:PCBM composites by thermal annealing for high-performance bulk-heterojunction solar cells
X. Fan et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)
Effect of Charge Recombination on the Fill Factor of Small Molecule Bulk Heterojunction Solar Cells
Yuan Zhang et al.
ADVANCED ENERGY MATERIALS (2011)
Differential Resistance Analysis of Charge Carrier Losses in Organic Bulk Heterojunction Solar Cells: Observing the Transition from Bimolecular to Trap-Assisted Recombination and Quantifying the Order of Recombination
Wei Lin Leong et al.
ADVANCED ENERGY MATERIALS (2011)
Efficiency Enhancement in Organic Photovoltaic Cells: Consequences of Optimizing Series Resistance
Jonathan D. Servaites et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Interface state recombination in organic solar cells
R. A. Street et al.
PHYSICAL REVIEW B (2010)
Vertically-aligned nanostructures of ZnO for excitonic solar cells: a review
Irene Gonzalez-Valls et al.
ENERGY & ENVIRONMENTAL SCIENCE (2009)
Polymer solar cells with enhanced open-circuit voltage and efficiency
Hsiang-Yu Chen et al.
NATURE PHOTONICS (2009)
The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered
Matthieu Manceau et al.
POLYMER DEGRADATION AND STABILITY (2009)
Nanoscale charge transport and internal structure of bulk heterojunction conjugated polymer/fullerene solar cells by scanning probe microscopy
Mark Dante et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2008)
p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells
Michael D. Irwin et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Stability/degradation of polymer solar cells
Mikkel Jorgensen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)
Organic light-emitting diode (OLED) technology: materials, devices and display technologies
Bernard Geffroy et al.
POLYMER INTERNATIONAL (2006)
Design rules for donors in bulk-heterojunction solar cells -: Towards 10 % energy-conversion efficiency
MC Scharber et al.
ADVANCED MATERIALS (2006)
Organic solar cells using inverted layer sequence
M Glatthaar et al.
THIN SOLID FILMS (2005)
Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology
WL Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 blends -: art. no. 083506
M Reyes-Reyes et al.
APPLIED PHYSICS LETTERS (2005)
Study of field effect mobility in PCBM films and P3HT:PCBM blends
E von Hauff et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2005)
4.2% efficient organic photovoltaic cells with low series resistances
JG Xue et al.
APPLIED PHYSICS LETTERS (2004)
Analysis of the effect of parasitic resistances on the performance of photovoltaic modules
EE van Dyk et al.
RENEWABLE ENERGY (2004)
Organic solar cells: An overview
H Hoppe et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Temperature dependent characteristics of poly(3 hexylthiophene)-fullerene based heterojunction organic solar cells
D Chirvase et al.
JOURNAL OF APPLIED PHYSICS (2003)
Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene) -: art. no. 064203
PJ Brown et al.
PHYSICAL REVIEW B (2003)
Charge-carrier transport in disordered organic solids
SD Baranovskii et al.
PHYSICAL REVIEW B (2000)
Modelling polycrystalline semiconductor solar cells
M Burgelman et al.
THIN SOLID FILMS (2000)