☆ 4.6 Article

Hydrothermal Synthesis of Nickel Oxide and Its Application in the Additive Manufacturing of Planar Nanostructures

MOLECULES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Inorganic & Nuclear

Synthesis of NiO Nanoparticles via Calcination of Surfactant Intercalated Layered Nickel Hydroxides and their Application as Adsorbent

Pankaj Rana et al.

Summary: In this study, NiO nanoparticles were synthesized using SDS intercalated layered nickel hydroxides as precursors. The precursors were converted into NiO nanoparticles via calcination. The resulting NiO nanoparticles possessed small crystallite size, large specific surface area, and retained the morphology of the precursors.

JOURNAL OF CLUSTER SCIENCE (2023)

添加到收藏夹

Article Materials Science, Ceramics

Atmospheric plasma spraying to fabricate metal-supported solid oxide fuel cells with open-channel porous metal support

Jie Lin et al.

Summary: Metal-supported solid oxide fuel cells (MS-SOFCs) were successfully fabricated using phase-inversion tape-casting and atmospheric plasma spraying techniques. The amount of binder in the slurries and the plasma power of the plasma spraying process significantly influenced the microstructure of the metal support, electrolyte, and cathode. The MS-SOFCs achieved high cell power density and low resistances under optimized conditions.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

添加到收藏夹

Review Chemistry, Physical

Liquid biofuels for solid oxide fuel cells: A review

Nanqi Li et al.

Summary: Liquid biofuels, as renewable and sulfur-free energy supplements, are favored by solid oxide fuel cells for their high efficiency and clean emissions. Direct and indirect utilizations are important for short-chain and long-chain liquid biofuels, respectively. However, the overall summary of their usage, including SOFC technologies and reforming processes, is currently messy and incomplete.

JOURNAL OF POWER SOURCES (2023)

添加到收藏夹

Article Electrochemistry

3D highly porous microspherical morphology of NiO nanoparticles for supercapacitor application

Sandeep Sheokand et al.

Summary: In this study, the effect of reaction temperature and urea concentration on the electrochemical performance of NiO nanoparticles is investigated through the synthesis of NiO nanosheets using a hydrothermal method. The structural and morphological characterizations of the synthesized nanoparticles are analyzed and the electrochemical performance of the developed electrodes is evaluated. The binder-free electrode prepared using these NiO nanosheets displays excellent specific capacity and cyclic stability, demonstrating promising potential for energy storage applications.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aerosol Jet Printing of Multi-Dimensional OECT Force Sensor with High Sensitivity and Large Measuring Range

Xinzhao Zhou et al.

Summary: A thin multi-dimensional force sensor based on organic electrochemical transistors (OECTs) has been designed with a unilateral conductive micro-riblets array. The sensor has a tunable range/sensitivity and can recognize force direction. It is fabricated using aerosol jet printing and exhibits high sensitivity and a large measuring range.

ADVANCED MATERIALS TECHNOLOGIES (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Inkjet Printed Quantum Dots Color Conversion Layers for Full-Color Micro-LED Displays

Feng Qin et al.

Summary: In this study, a full-color Micro LED display with red and green quantum dot color conversion layers fabricated by inkjet printing was successfully developed, showing excellent performance.

ELECTRONIC MATERIALS LETTERS (2023)

添加到收藏夹

Article Chemistry, Physical

NiS2 nanospheres coated by nitrogen-doped carbon for enhanced sodium storage performance

W. X. Zhang et al.

Summary: Carbon layer-coated and N-doped NiS2 nanospheres were synthesized through PVP-assisted hydrothermal and subsequent annealing processes, which reduced volume expansion, improved electrical conductivity and Na+ storage activity, and increased ion diffusion kinetics during electrochemical charge-discharge. NiS2@NC showed excellent specific capacity (554.3 mAh g-1 at 0.2 A g-1, first-cycle coulombic efficiency of 92.3%) and excellent long-cycle stability (436.3 mAh g-1 at 1 A g-1 for 800 cycles) when evaluated as a negative electrode for Sodium-ion batteries, demonstrating its potential as an ideal anode material for SIBs.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Systematic Design of a Graphene Ink Formulation for Aerosol Jet Printing

Livio Gamba et al.

Summary: Aerosol jet printing is a noncontact, digital, additive manufacturing technique compatible with a wide variety of functional materials. In this study, a systematic approach to formulating a polymer-stabilized graphene ink is reported, considering the effect of solvent composition on dispersion, rheology, wetting, drying, and phase separation. The ink formulation achieved efficient ink atomization, controlled in-line drying, and high resolution and electrical conductivity, demonstrating its viability for fabricating functional electronic devices.

ACS APPLIED MATERIALS & INTERFACES (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Photoresponse Analysis of All-Inkjet-Printed Single-Walled Carbon Nanotube Thin-Film Transistors for Flexible Light-Insensitive Transparent Circuit Applications

Jewook Ha et al.

Summary: We present a study on robust, transparent, and flexible thin-film transistors made of single-walled carbon nanotubes using an all-inkjet printing method. Our findings reveal that these thin-film transistors exhibit different photoresponses based on the power levels of incident light, distinguishing them from previous reports that classified them as photodetectors. Furthermore, these transistors show stability under daily illumination conditions, making them suitable for light-insensitive transparent and flexible electronic applications.

ACS APPLIED MATERIALS & INTERFACES (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Inkjet Printing of MnO2 Nanoflowers on Surface-Modified A4 Paper for Flexible All-Solid-State Microsupercapacitors

Ali Sajedi-Moghaddam et al.

Summary: This study demonstrates the utilization of inkjet printing method to fabricate flexible micro-supercapacitors (MSCs) based on manganese dioxide (MnO2) on surface-modified A4 paper substrate. The appropriate rheology of the ethanol-based ink and the proper dimensions of MnO2 nanoflowers ensure a reliable inkjet printing process. The resulting MSCs show high areal capacitance, durability, foldability, and superior areal energy density and power density.

ACS APPLIED MATERIALS & INTERFACES (2023)

添加到收藏夹

Article Engineering, Environmental

A rational design of highly active and coke-resistant anode for methanol-fueled solid oxide fuel cells with Sn doped Ni-Ce0.8Sm0.2O2_?

Tian Gan et al.

Summary: A Sn-doped Ce0.8Sm0.2O2_delta (SDC) supported Sn-Ni alloy anode was designed and prepared through a dual-modification strategy. The substitution of Sn improved the mobility of lattice oxygen in SDC, and Sn exsolves from the oxide phase to form intermetallic compounds with Ni after reduction. The composite anode showed unprecedented activity in the electrochemical oxidation of H2 and CH3OH, with high power densities achieved using these fuels. This work opens a new path for the design of high-performance SOFC anodes.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Chemistry, Physical

Microextrusion printing of gas-sensitive planar anisotropic NiO nanostructures and their surface modification in an H2S atmosphere

Artem S. Mokrushin et al.

Summary: In this study, NiO nanosheets were synthesized using the hydrothermal method and applied in printing technology for gas detection. The conductivity of the NiO coating exhibited different changes when detecting different gases, and significant chemical modification of the coating was observed upon exposure to H2S, resulting in changes in the sensory properties.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Materials Science, Ceramics

Hydrothermally synthesized hierarchical Ce1-xSmxO2-δ oxides for additive manufacturing of planar solid electrolytes

Tatiana L. Simonenko et al.

Summary: This study investigated the hydrothermal synthesis of Ce1-xSmxO2-delta oxides, analyzing their microstructure, thermal behavior, and transformation process, as well as the impact of nanopowder particle size and shape on electrochemical properties. Atomic force and scanning electron microscopy were used to study the influence of nanopowders on the microstructure of coatings. Impedance spectroscopy was utilized to evaluate dopant concentration effects on solid electrolyte electrical conductivity and demonstrate the effectiveness of microextrusion printing in creating planar components for alternative energy devices.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Classification of Solid Oxide Fuel Cells

Kairat A. Kuterbekov et al.

Summary: This review summarizes various types of solid oxide fuel cells (SOFC) and describes their structural features, advantages, and disadvantages. Among the well-studied dual-chamber SOFC, those with anode-supported design and oxygen-ion conducting electrolyte are found to be the most suitable for operation at temperatures below 800 degrees C. Other promising types for low-temperature operation include SOFC with proton-conducting electrolyte and electrolyte-free fuel cells, although further research and development are needed for commercialization.

NANOMATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Towards Achieving Environmental Sustainability: The Role of Nuclear Energy, Renewable Energy, and ICT in the Top-Five Carbon Emitting Countries

Anam Azam et al.

Summary: This study examines the heterogeneous impacts of nuclear energy, renewable energy, and information and communication technologies (ICTs) on pollution emissions reduction for the top-five emitter countries. The findings show that nuclear energy has a negligible effect on reducing environmental pollution, while renewable energy and ICT significantly decrease carbon emissions.

FRONTIERS IN ENERGY RESEARCH (2022)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Synthesis of Nanoscale Co3O4 Spinel and Its Application to Form Miniature Planar Structures by Microplotter Printing

T. L. Simonenko et al.

Summary: The formation of nanocrystalline Co3O4 by chemical precipitation was studied in this research. The obtained semiproduct was validated through simultaneous thermal analysis, infrared spectroscopy, and X-ray powder diffraction analysis. The thermal decomposition process of the semiproduct and the formation of the target oxide were investigated. The research showed the possibility of using the developed technology for the manufacturing of electrode structures Co3O4 for planar type supercapacitors.

RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Synthesis of ((CeO2)0.8(Sm2O3)0.2)@NiO Core-Shell Type Nanostructures and Microextrusion Printing of a Composite Anode Based on Them

Tatiana L. L. Simonenko et al.

Summary: This study focuses on the hydrothermal synthesis of hierarchically organized nanomaterials with core-shell structure and their potential application in the formation of planar composite structures using microextrusion printing. The synthesis conditions of the nanospheres and the surface modification by growing the NiO shell were investigated. The microstructure, crystal structure, functional groups, thermal behavior, and electronic state of the resulting coating were studied using various characterization techniques. The surface topography, local electrophysical properties, and electrical conductivity of the composite coating were also analyzed.

MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrathin Al-air batteries by reducing the thickness of solid electrolyte using aerosol jet printing

Yuxin Zuo et al.

Summary: This study focuses on minimizing the thickness of the solid electrolyte for flexible Al-air batteries, using an innovative aerosol jet printing method to prepare ultrathin electrolytes. The ultra-thin electrolyte has been successfully applied to flexible Al-air batteries, providing new ideas for the preparation of thin electrolytes for flexible energy products.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Chemistry, Physical

A high-performance planar anode-supported solid oxide fuel cell with hierarchical porous structure through slurry-based three-dimensional printing

Keyvan Mirzaee Fashalameh et al.

Summary: In this study, a planar multi-layer solid oxide fuel cell (SOFC) was successfully fabricated using slurry-based 3D printing. The results showed that the use of hierarchically macromesopores structure can increase power density, and electrochemical performance can be improved by modifying the geometry of the layers.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Highly flexible solid oxide fuel cells using phase-controlled electrolyte support

Bo -Ram Won et al.

Summary: This study reports a phase-controlled, bendable, ultra-thin 3YSZ electrolyte with high flexural strength and improved ohmic resistance. The highest cell performance among reported flexible SOFCs is achieved using conventional electrodes, with a maximum power density of 0.86 W cm(-2) at 900 degrees C. This study provides a framework for developing flexible SOFCs as next-generation power sources for mobile devices with high volumetric power.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanocomposite Catalyst for High-Performance and Durable Intermediate-Temperature Methane-Fueled Metal-Supported Solid Oxide Fuel Cells

Fan Liu et al.

Summary: In this study, a highly active nanocomposite catalyst was deliberately designed and synthesized to optimize the performance of CH4-MS-SOFCs. The optimized CH4-MS-SOFCs showed significantly improved power densities and durability, with an operating temperature reduced to 600 degrees C.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Triethanolamine-Assisted Hydrothermal Synthesis of Hierarchically Organized Nickel Oxide Particles

T. L. Simonenko et al.

Summary: This study investigated the hydrothermal synthesis of hierarchical nickel oxide particles assisted by triethanolamine. The thermal behavior, crystal structure, and spectral characteristics of alpha-Ni(OH)2 were studied, and it was found that thermal treatment resulted in the formation of desired nanocrystalline oxide.

RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Facile synthesis of NiO@Ni(OH)2-α-MoO3 nanocomposite for enhanced solid-state symmetric supercapacitor application

Gunasekaran Manibalan et al.

Summary: The study successfully fabricated nickel-molybdenum heterogeneous nanocomposites and demonstrated their excellent performance in supercapacitor applications, including high specific capacitance, outstanding rate capability, and good cycling stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Synthesis the flower-like N-C/NiO nanocomposites by one-pot hydrothermal method as efficient electrocatalyst for methanol oxidation in alkaline electrolyte

Yingzhen Zhang et al.

Summary: In this study, N-C/NiO nanocomposites with different morphologies were successfully synthesized, and the introduction of N-C-SiO2 nanosheets significantly enhanced their electrochemical performance, exhibiting excellent electrocatalytic activity and long-term stability for methanol oxidation reaction.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

添加到收藏夹

Article Chemistry, Physical

Fabrication of 1D mesoporous NiO nano-rods as high capacity and long-life anode material for lithium ion batteries

Jay Singh et al.

Summary: One-dimensional porous NiO nano-rods were synthesized using hydrothermal synthesis method, showing excellent electrochemical performance with good rate capability and long cycling stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Platinum Based Nanoparticles Produced by a Pulsed Spark Discharge as a Promising Material for Gas Sensors

Ivan A. Volkov et al.

Summary: The study focused on producing nanoparticles from platinum ingots using spark ablation technology, which were then used in functional colloidal ink formulation. Aerosol jet printing technology was utilized to pattern conductive lines and microheaters on ceramic membranes, showing potential applications in printed electronics.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Review Chemistry, Applied

Recent progress in metal-ceramic anode of solid oxide fuel cell for direct hydrocarbon fuel utilization: A review

Hazrul Adzfar Shabri et al.

Summary: Solid oxide fuel cells (SOFCs) utilizing hydrocarbon fuels like methane can encounter carbon deposition issues, which can be mitigated by using alloy metals and combining ceramic components with oxygen carriers to enhance carbon deposition tolerance.

FUEL PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Direct-Hydrocarbon Proton-Conducting Solid Oxide Fuel Cells

Fan Liu et al.

Summary: Solid oxide fuel cells (SOFCs) are promising solid-state power sources that directly convert chemical energy into electric power. Direct-hydrocarbon SOFCs simplify the system and reduce capital costs by eliminating external reformers.

SUSTAINABILITY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fascinating Tin Effects on the Enhanced and Large-Current-Density Water Splitting Performance of Sn-Ni(OH)(2)

Juan Jian et al.

Summary: In this study, Sn-Ni(OH)(2) with homogeneously distributed nanosheet array was successfully synthesized and showed significantly enhanced catalytic activity in both OER and HER processes, providing stable and high current densities. Experimental phenomena and theoretical calculations confirm that the enhancement mainly stems from the introduced Sn4+ site.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

NiO/CeO2-Sm2O3 nanocomposites for partial oxidation of methane: In-situ experiments by dispersive X-ray absorption spectroscopy

Lucia M. Toscani et al.

Summary: This study focuses on the analysis of SDC nanopowders and NiO/SDC nanocomposites in terms of their reducibility and catalytic activity for partial oxidation of methane. The results show that the crystallite size and surface area play a crucial role in methane activation by modifying the sample's redox behavior, with the oxidation of the metallic phase being the main cause of sample deactivation. A complex relationship between oxygen vacancy concentration and catalytic activity was observed during the experiments.

APPLIED CATALYSIS A-GENERAL (2021)

添加到收藏夹

Article Chemistry, Physical

Recent progress in nanostructured electrodes for solid oxide fuel cells deposited by spray pyrolysis

Lucia dos Santos-Gomez et al.

Summary: The passage discusses the research progress on low-temperature solid oxide fuel cells (LT-SOFCs), emphasizing the potential of nanostructured electrodes to improve efficiency and the spray pyrolysis deposition as an effective electrode preparation technique. Recent advances focus on different microstructural strategies to enhance electrode performance, and also address the current challenges and future directions for further improving the properties of new nanostructured electrodes.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Pen Plotter Printing of MnOx Thin Films Using Manganese Alkoxoacetylacetonate

T. L. Simonenko et al.

Summary: The study investigated the preparation of MnOx thin films using a combination of sol-gel method and pen plotter printing, assessing the microstructure, optical and electrophysical properties of the manufactured films. The electron work function of the MnOx film surface and the temperature-dependent electrical conductivity of the films were evaluated using KPFM and impedance spectroscopy, respectively. The proposed synthetic method and printing technology show potential for applications in supercapacitor electrodes and optical devices.

RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Conformally anchoring nanocatalyst onto quartz fibers enables versatile microreactor platforms for continuous-flow catalysis

Jiahui Fan et al.

Summary: By anchoring NiO nanosheets onto QFs, high catalytic activity was achieved, demonstrating the potential of fiber-based QF@NiO composites as versatile platforms for developing microreactors for continuous-flow catalytic applications.

SCIENCE CHINA-CHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Improvement of electrical performance by surface structure of Ni-material as a high-performance asymmetric supercapacitor electrode

Damin Lee et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Chemistry, Physical

Solid oxide fuel cell: Materials for anode, cathode and electrolyte

Sudhanshu Dwivedi

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Review Energy & Fuels

Fabrication of high-quality electrode films for solid oxide fuel cell by screen printing: A review on important processing parameters

Nurul Akidah Baharuddin et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

All-Sputtered, Superior Power Density Thin-Film Solid Oxide Fuel Cells with a Novel Nanofibrous Ceramic Cathode

Yoon Ho Lee et al.

NANO LETTERS (2020)

添加到收藏夹

Article Electrochemistry

Reduced graphene oxide supported 2D-NiO nanosheets modified electrode for urea detection

T. Ravindran Madhura et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell

Muhammad Bilal Hanif et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Formation of Hierarchical NiO Coatings on the Surface of Al2O3Substrates under Hydrothermal Conditions

T. L. Simonenko et al.

RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

Composite electrodes of Ti-doped SrFeO3-δ and LSGMZ electrolytes as both the anode and cathode in symmetric solid oxide fuel cells

Gihun Hong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Review Energy & Fuels

Material and method selection for efficient solid oxide fuel cell anode: Recent advancements and reviews

Muhammad Rafique et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)

添加到收藏夹

Article Materials Science, Ceramics

Raspberry-like Ni/NiO/CoO/Mn3O4 hierarchical structures as novel electrode material for high-performance all-solid-state asymmetric supercapacitors

Xuansheng Feng et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Chemistry, Physical

Synthesis of BaCe0.9-xZrxY0.1O3-δ nanopowders and the study of proton conductors fabricated on their basis by low-temperature spark plasma sintering

Tatiana L. Simonenko et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

3D β-Ni(OH)2 nanowires/RGO composite prepared by phase transformation method for superior electrochemical performance

Wenxiu He et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Facile synthesis of nickel oxide nanoparticles for the degradation of Methylene blue and Rhodamine B dye: a comparative study

Subhash Dharmraj Khairnar et al.

JOURNAL OF TAIBAH UNIVERSITY FOR SCIENCE (2019)

添加到收藏夹

Article Chemistry, Analytical

Directly writing barrier-free patterned biosensors and bioassays on paper for low-cost diagnostics

Shan Liu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ink-jet printing of a TiO2-10%ZrO2 thin film for oxygen detection using a solution of metal alkoxoacetylacetonates

Elizaveta P. Simonenko et al.

THIN SOLID FILMS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Structure of Ni(OH)2 intermediates determines the efficiency of NiO-based photocathodes - a case study using novel mesoporous NiO nanostars

Ruri Agung Wahyuono et al.

RSC ADVANCES (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of Fluoride on the Morphology and Electrochemical Property of Co3O4 Nanostructures for Hydrazine Detection

Tuantuan Zhou et al.

MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Hydrothermally synthesized NiO-samarium doped ceria nano-composite as an anode material for intermediate-temperature solid oxide fuel cells

Xueli Yao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Applications of hierarchically structured porous materials from energy storage and conversion, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine

Ming-Hui Sun et al.

CHEMICAL SOCIETY REVIEWS (2016)

添加到收藏夹

Article Electrochemistry

Communication-Gas Sensing Behaviors of Electrophoretically Deposited Nickel Oxide Films from Morphologically Tailored Particles

Yoonsung Chung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

添加到收藏夹

Article Energy & Fuels

Conversion of biogas to synthesis gas over NiO/CeO2-Sm2O3 catalysts

M. Genoveva Zimicz et al.

FUEL (2015)

添加到收藏夹

Article Chemistry, Physical

High-performance electrode materials of hierarchical mesoporous nickel oxide ultrathin nanosheets derived from self-assembled scroll-like α-nickel hydroxide

Mingming Yao et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

A robust NiO-Sm0.2Ce0.8O1.9 anode for direct-methane solid oxide fuel cell

Dong Tian et al.

MATERIALS RESEARCH BULLETIN (2015)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

A new route for synthesis of spherical NiO nanoparticles via emulsion nano-reactors with enhanced photocatalytic activity

Farnaz Fazlali et al.

SOLID STATE SCIENCES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Au-ZnO Nanocomposite Films for Plasmonic Photocatalysis

Diana M. Fragua et al.

ADVANCED MATERIALS INTERFACES (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Probing local electrochemical activity within yttria-stabilized-zirconia via in situ high-temperature atomic force microscopy

Jiaxin Zhu et al.

JOURNAL OF MATERIALS RESEARCH (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Enhancing SOFC cathode performance by surface modification through infiltration

Dong Ding et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultra-high specific capacitance of β-Ni(OH)2 monolayer nanosheets synthesized by an exfoliation-free sol-gel route

Hongtao Cui et al.

JOURNAL OF NANOPARTICLE RESEARCH (2014)

添加到收藏夹

Article Optics

Fabrication of high quality and low cost microlenses on a glass substrate by direct printing technique

Zhigang Zang et al.

APPLIED OPTICS (2014)

添加到收藏夹

Article Chemistry, Physical

Effects of catalyst characters on the photocatalytic activity and process of NiO nanoparticles in the degradation of methylene blue

Xia Wan et al.

APPLIED SURFACE SCIENCE (2013)

添加到收藏夹

Proceedings Paper Electrochemistry

Solid Oxide Fuel Cell - Gas Turbine Hybrid Power Plant

M. Henke et al.

SOLID OXIDE FUEL CELLS 13 (SOFC-XIII) (2013)

添加到收藏夹

Article Materials Science, Ceramics

Effect of variation of NiO on properties of NiO/GDC (gadolinium doped ceria) nano-composites

A. U. Chavan et al.

CERAMICS INTERNATIONAL (2012)

添加到收藏夹

Article Chemistry, Physical

Mesoporous NiO ultrathin nanowire networks topotactically transformed from α-Ni(OH)2 hierarchical microspheres and their superior electrochemical capacitance properties and excellent capability for water treatment

Xiaowei Li et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

添加到收藏夹

Article Chemistry, Physical

Behavior and mechanisms of Ni/ScSZ cermet anode deterioration by trace tar in wood gas in a solid oxide fuel cell

Tomoaki Namioka et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

添加到收藏夹

Article Chemistry, Physical

Microwave-assisted gas/liquid interfacial synthesis of flowerlike NiO hollow nanosphere precursors and their application as supercapacitor electrodes

Chang-Yan Cao et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

添加到收藏夹

Article Electrochemistry

Hierarchically ordered porous nickel oxide array film with enhanced electrochemical properties for lithium ion batteries

Y. F. Yuan et al.

ELECTROCHEMISTRY COMMUNICATIONS (2010)

添加到收藏夹

Article Chemistry, Physical

Fabrication of solid oxide fuel cell anode electrode by spray pyrolysis

Lin Liu et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Materials Science, Coatings & Films

Ni-YSZ films deposited by reactive magnetron sputtering for SOFC applications

E. Rezugina et al.

SURFACE & COATINGS TECHNOLOGY (2010)

添加到收藏夹

Article Electrochemistry

Reaction Process in the Ni-SDC Cermet Anode

Haruo Kishimoto et al.

ELECTROCHEMISTRY (2009)

添加到收藏夹

Article Chemistry, Physical

3D flowerlike α-nickel hydroxide with enhanced electrochemical activity synthesized by microwave-assisted hydrothermal method

Linping Xu et al.

CHEMISTRY OF MATERIALS (2008)

添加到收藏夹

Article Chemistry, Physical

Facile synthesis and hierarchical assembly of hollow nickel oxide architectures bearing enhanced photocatalytic properties

Xuefeng Song et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

The future of energy supply: Challenges and opportunities

Nicola Armaroli et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)

添加到收藏夹

Article Chemistry, Physical

β-nickel hydroxide nanosheets and their thermal decomposition to nickel oxide nanosheets

ZH Liang et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.