☆ 4.5 Article

In Situ Observation of the Agglomeration of MgO-Al2O3 Inclusions on the Surface of a Molten GCr15-Bearing Steel

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

Evolution of inclusions in a pipeline steel during continuous casting and hot rolling process

Yi Wang et al.

Summary: Industrial trials were conducted to investigate the evolution of inclusions in pipeline steel during continuous casting and hot rolling. The composition and area fraction of inclusions changed during different stages, with smaller inclusions having a more favorable transformation. Crushing during the hot rolling process led to a decrease in the CaS content of inclusions.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Progress on statistical models of evaluating inclusions in clean steels

Zheng Wang et al.

Summary: This article reviews statistical models for non-metallic inclusions in clean steels, with a focus on block maxima and threshold types of models, which are widely used and based on extreme value theory. Suggestions for future research are also provided.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Mg addition on TiN inclusions in GCr15 bearing steel

Lei Cao et al.

Summary: Compared with the original GCr15 bearing steel, Mg addition greatly reduces TiN inclusions and leads to the formation of various Mg-containing non-metallic inclusions. In situ observation and thermodynamic calculations confirm that MgO can provide nucleation sites for TiN, while MgS•MnS and MgO-MgS•MnS inclusions can also serve as positions for TiN nucleation.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of ferromanganese additions on non-metallic inclusion characteristics in TRIP steel

Wei-sheng Wang et al.

Summary: The inclusion characteristics in different grades of FeMn alloys and the effect of FeMn alloys on TRIP steel were evaluated. Different grades of FeMn alloys contain different main inclusions, while TRIP steel mainly contains Al2O3, AlN, MnS, etc.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Effect of a large population of seeded alumina inclusions on crack initiation and small crack fatigue crack growth in Udimet 720 nickel-base disk superalloy

J. Telesman et al.

Summary: In this study, crack initiation, crack coalescence, and small crack growth behavior of over 400 seeded inclusions in P/M Udimet 720 nickel disk alloy were monitored during interrupted low cycle fatigue testing at 650 degrees C. Two types of seeded alumina inclusions were used with average sizes of 54 μm and 122 μm, with fatigue behavior sub-categorized into four groups and detailed visual maps developed for inclusion size/cycle history. The effect of surface residual stresses on fatigue life was also investigated.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Mg and La on the evolution of inclusions and microstructure in Ca-Ti treated steel

Lei Wang et al.

Summary: The evolution of inclusions and the formation of acicular ferrite in Ca-Ti treated steel after Mg and La addition were systematically investigated. The types of inclusions in the molten steel and final quenched samples were similar, but with differences in morphology, where the La-containing sample had the smallest average inclusion size and highest number density. Additionally, the percentage of acicular ferrite increased due to the increase in effective inclusions in the La-containing sample.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-depth analysis of the fatigue mechanism induced by inclusions for high-strength bearing steels

Chao Gu et al.

Summary: The study investigated the stress distribution and fatigue behavior influenced by voids adjacent to inclusions, showing that the effects of inclusions on fatigue life reduce significantly when mechanical properties are similar. Additionally, it was found that the position of voids near inclusions plays a critical role in determining their impact on fatigue behavior.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of trace Si on MgO•Al2O3 inclusion in ultra-low-carbon steel

Lei Cao et al.

Summary: Four types of Mg-Al-Si-O inclusions were observed in Mg-treated Al-deoxidized ultra-low-carbon steel, and their phase relationships were calculated using FactSage software. The stable region range of different Mg-Al-Si-O-based inclusions can be changed by altering the Si content. Experimental observations and predictions were used to establish a kinetic model describing the formation process of the inclusions.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrahigh cycle fatigue fracture mechanism of high-quality bearing steel obtained through different deoxidation methods

Wei Xiao et al.

Summary: The study investigates the mechanism of oxide inclusions in fatigue crack initiation in the VHCF regime, revealing differences in inclusion types and their effects on fatigue life in Si- and Al-deoxidized steels. Cracks in Al-deoxidized steel are caused by calcium aluminate inclusions, while most fatigue cracks in Si-deoxidized steel are triggered by the inhomogeneity of the steel matrix. The mechanisms of fatigue fracture caused by calcium aluminate and silicate inclusions are analyzed, showing varying impacts on the fatigue life of bearing steels.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic mass variation and multiphase interaction among steel, slag, lining refractory and nonmetallic inclusions: Laboratory experiments and mathematical prediction

Ju-jin Wang et al.

Summary: The mass transfer among the multiphase interactions during the refining process of a bearing steel was studied using laboratory experiments and numerical kinetic prediction. The slag phase was found to significantly accelerate the mass transfer rate, with the system containing slag having a rate approximately 5 times larger than the system without slag. The established kinetic model accurately predicted the composition transformation of inclusions and the mass transfer of magnesium and aluminum in the steel.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Agglomeration Characteristics of Various Inclusions in Al-killed Molten Steel Containing Rare Earth Element

Yeguang Wang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution Mechanism of Inclusions in Medium-Manganese Steel by Mg Treatment with Different Aluminum Contents

Zhe Yu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel mechanism for the modification of Al2O3-based inclusions in ultra-low carbon Al-killed steel considering the effects of magnesium and calcium

Jing Guo et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

In Situ Observations of Agglomeration of Non-metallic Inclusions at Steel/Ar and Steel/Slag Interfaces by High-Temperature Confocal Laser Scanning Microscope: A Review

Wangzhong Mu et al.

JOM (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

In Situ Observation of Dissolution of Oxide Inclusions in Steelmaking Slags

Mukesh Sharma et al.

JOM (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Mg addition on formation of intragranular acicular ferrite in heat-affected zone of steel plate after high-heat-input welding

Long-yun Xu et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ observation of deformation behavior of chain aggregate inclusions: a case study for Al2O3 at a liquid steel/argon interface

Wangzhong Mu et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

In Situ Observation of Calcium Aluminate Inclusions Dissolution into Steelmaking Slag

Keyan Miao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

In Situ Observation of the Precipitation, Aggregation, and Dissolution Behaviors of TiN Inclusion on the Surface of Liquid GCr15 Bearing Steel

Qianren Tian et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Evolution of Al2O3 inclusions by magnesium treatment in H13 hot work die steel

H. Wang et al.

IRONMAKING & STEELMAKING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Agglomeration of Non-metallic Inclusions at the Steel/Ar Interface: Model Application

Wangzhong Mu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Agglomeration of Non-metallic Inclusions at Steel/Ar Interface: In-Situ Observation Experiments and Model Validation

Wangzhong Mu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

In-situ observation of the behaviour of non-metallic inclusions at different interfaces in the system steel-slag-refractory

S. K. Michelic et al.

International Symposium on Liquid Metal Processing & Casting 2015 (LMPC2015) (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Wettability of Al2O3, MgO and Ti2O3 by Liquid Iron and Steel

Changji Xuan et al.

ISIJ INTERNATIONAL (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hydrodynamics of Particles at an Oil-Water Interface

Archit Dani et al.

LANGMUIR (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Mg Addition on Inclusions Formation and Resultant Solidification Structure Changes of Ti-stabilized Ultra-pure Ferritic Stainless Steel

Ying-tie Xu et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Magnesium on Evolution of Oxide and Sulphide in Liquid Iron at 1873 K

Tong-sheng Zhang et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Modification of Inclusions in Liquid Iron by Mg Treatment

Tong-sheng Zhang et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

In Situ Observation on Behaviors of CaO-MgO-Al2O3-SiO2 Complex Inclusions at Solid-Liquid Interface of Low-Oxygen Special Steel

Min Jiang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

In Situ Observation of the Evolution of Intragranular Acicular Ferrite at Ce-Containing Inclusions in 16Mn Steel

Wen Bin et al.

STEEL RESEARCH INTERNATIONAL (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Observation on Physical Growth of Nonmetallic Inclusion in Liquid Steel During Ladle Treatment

Youngjo Kang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wettability between Porous MgAl2O4 Substrates and Molten Iron

Naotaka Fukami et al.

MATERIALS TRANSACTIONS (2009)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

In situ studies of agglomeration between Al2O3-CaO inclusions at metal/gas, metal/slag interfaces and in slag

J. Wikstrom et al.

IRONMAKING & STEELMAKING (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

In situ studies of misch-metal particle behavior on a molten stainless steel surface

J. Appelberg et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

In situ studies of the agglomeration phenomena for calcium-alumina inclusions at liquid steel-liquid slag interface and in the slag

J. Wikstrom et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Review Materials Science, Multidisciplinary

State of the art in the control of inclusions during steel ingot casting

Lifeng Zhang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2006)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Observation of inclusions in manganese-silicon killed steels at steel-gas and steel-slag interfaces

S Vantilt et al.

ISIJ INTERNATIONAL (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Observation of calcium aluminate inclusions at interfaces between Ca-treated, Al-killed steels and slags

B Coletti et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Studies of the wetting characteristics of liquid iron on dense alumina by the X-ray sessile drop technique

E Kapilashrami et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

State of the art in evaluation and control of steel cleanliness

LF Zhang et al.

ISIJ INTERNATIONAL (2003)

添加到收藏夹

Article Thermodynamics

FactSage thermochemical software and databases

C Bale et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ observation of TiN precipitates at stainless steel/CaO-Al2O3-MgO-SiO2 interface

P Misra et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Capillary interaction between inclusion particles on the 16Cr stainless steel melt surface

K Nakajima et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2001)

添加到收藏夹

Article Materials Science, Ceramics

Separation and dissolution of Al2O3 inclusions at slag/metal interfaces

SH Lee et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Behavior of alumina-magnesia complex inclusions and magnesia inclusions on the surface of molten low-carbon steels

S Kimura et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Behavior of nonmetallic inclusions in front of the solid-liquid interface in low-carbon steels

S Kimura et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2000)

添加到收藏夹

Review Chemistry, Physical

Capillary interactions between particles bound to interfaces, liquid films and biomembranes

PA Kralchevsky et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.