相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Three-dimensional phase field simulation of spheroidal grain formation during semi solid processing of Al-7Si-0.3 Mg alloy
Prosenjit Das et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Effect of Cooling Rate on the Solidification Microstructure and Characteristics of Primary Carbides in H13 Steel
Mingtao Ma et al.
ISIJ INTERNATIONAL (2019)
Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system
Prosenjit Das et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Multiphase Model of Semisolid Slurry Generation and Isothermal Holding During Cooling Slope Rheoprocessing of A356 Al Alloy
Prosenjit Das et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
Phase field modelling of microstructure evolution and ripening driven grain growth during cooling slope processing of A356 Al alloy
Prosenjit Das et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry
Prosenjit Das et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy
Prosenjit Das et al.
ISIJ INTERNATIONAL (2014)
Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis
Prosenjit Das et al.
MEASUREMENT (2014)
Low-Convection-Cooling Slope Cast AlSi7Mg Alloy: A Rheological Perspective
R. Ritwik et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Variability in the impact properties of A356 aluminum alloy on microporosity variation
Choong Do Lee
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope
P. Das et al.
MATERIALS SCIENCE AND TECHNOLOGY (2013)
Evaluation of primary phase morphology of cooling slope cast Al-Si-Mg alloy samples using image texture analysis
Prosenjit Das et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2013)
In situ synchrotron tomographic investigation of the solidification of an AlMg4.7Si8 alloy
D. Tolnai et al.
ACTA MATERIALIA (2012)
Characterization of the microstructure evolution of a semi-solid metal slurry during the early stages
R. Canyook et al.
ACTA MATERIALIA (2012)
The role of strontium in modifying aluminium-silicon alloys
M. Timpel et al.
ACTA MATERIALIA (2012)
Microstructural evolution of A356.2 alloy prepared by the SIMA process
Guanhai Yan et al.
MATERIALS CHARACTERIZATION (2012)
Growth mechanism of primary silicon in cast hypoeutectic Al-Si alloys
Wang Shou-ren et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope
Prosenjit Das et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2012)
Microstructure evolution of Al-Si semi-solid slurry by gas bubble stirring method
Zhang Lei et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2011)
Influence of Ti, B and Sr on the microstructure and mechanical properties of A356 alloy
D. G. Mallapur et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Effect of a novel thixoforming process on the microstructure and fracture behavior of A356 aluminum alloy
A. Fadavi Boostani et al.
MATERIALS & DESIGN (2010)
Semisolid Microstructure Evolution during Cooling Slope Casting under Vibration of A380 Aluminum Alloy
S. Gencalp et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Effect of isothermal ageing on the semi-solid microstructure of rheoprocessed and partially remelted of A390 alloy with 10% Mg addition
Alireza Hekmat-Ardakan et al.
MATERIALS CHARACTERIZATION (2010)
Evolution of microstructure in semi-solid slurries of rheocast aluminum alloy
R. Canyook et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Isothermal coarsening of primary particles during rheocasting
Guo Hong-min et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al-10 wt.% Cu alloy
N. Limodin et al.
ACTA MATERIALIA (2009)
Microstructure evolution of A356 alloy in a novel rheocasting approach
Zhang Xiao-li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Study on the effects of the length and angle of inclined plate on the thixotropic microstructure of A356 aluminum alloy
Farshid Taghavi et al.
MATERIALS & DESIGN (2009)
Three-dimensional visualization and quantitative characterization of primary silicon particles in an Al-Si base alloy
H. Singh et al.
SCRIPTA MATERIALIA (2009)
Cooling slope casting to obtain thixotropic feedstock II: observations with A356 alloy
E. Cardoso Legoretta et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Modification of eutectic silicon in Al-Si alloys
Sathyapal Hegde et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Microstructure and tensile properties of thixoformed A356 alloy
S. Tahamtan et al.
MATERIALS CHARACTERIZATION (2008)
Microstructural coarsening of semi-solid aluminium alloys
H. V. Atkinson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
On the microstructure and properties of 100Cr6 steel processed in the semi-solid state
W. Puettgen et al.
ACTA MATERIALIA (2007)
Invited article: The fast readout low noise camera as a versatile x-ray detector for time resolved dispersive extended x-ray absorption fine structure and diffraction studies of dynamic problems in materials science, chemistry, and catalysis
Jean-ClauDe Labiche et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2007)
In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy
D. Ruvalcaba et al.
ACTA MATERIALIA (2007)
A357 thixoforming feedstock produced by cooling slope casting
Yucel Birol
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Mechanical properties of cast A356 alloy, solidified at cooling rates enhanced by phase transition of a cooling medium
L. Y. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
On the microstructure formation in chromium steels rapidly cooled from the semi-solid state
W. Puettgen et al.
ACTA MATERIALIA (2007)
Semisolid microstructure of Mg2Si/Al composite by cooling slope cast and its evolution during partial remelting process
Q. D. Qin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Combined grain refining and modification of conventional and rheo-cast A356 Al-Si alloy
Shahrooz Nafisi et al.
MATERIALS CHARACTERIZATION (2006)
Microstructure and rheological behavior of grain refined and modified semi-solid A356 Al-Si slurries
Shahrooz Nafisi et al.
ACTA MATERIALIA (2006)
The implication of rheological principles for characterization of semi-solid Al-Si cast billets
Omid Lashkari et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Structure and properties of a hypoeutectic chromium steel processed in the semi-solid state
D. I. Uhlenhaut et al.
ACTA MATERIALIA (2006)
Grain refining of conventional and semi-solid A356 Al-Si alloy
Shahrooz Nafisi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Effects of modification during conventional and semi-solid metal processing of A356 Al-Si alloy
S Nafisi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Microsegregation during the solidification of an Al-Mg-Si alloy in the presence of back diffusion and macrosegregation
I Vusanovic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Semi-solid behavior of new Al-Si-Mg alloys for thixoforming
A Paes et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Evolution of particle morphology in semisolid processing
RA Martinez et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
In-situ three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast X-ray microtomography
O Ludwig et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Real-time observation of grain nucleation and growth during solidification of aluminium alloys
N Iqbal et al.
ACTA MATERIALIA (2005)
Modelling the semisolid processing of metallic alloys
HV Atkinson
PROGRESS IN MATERIALS SCIENCE (2005)
Quantitative fractographic analysis of variability in tensile ductility of a squeeze cast Al-Si-Mg base alloy
AM Gokhale et al.
MATERIALS CHARACTERIZATION (2005)
The effect of globular microstructure size on the mechanical properties in reheating process of aluminum alloys
CG Kang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2004)
Microstructural evolution and rheological behaviour of aluminium alloys A356, and A356+0.5% Sn designed for thixocasting
EA Vieira et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Effect of macrostructure and microstructure on the viscosity of the A356 alloy in the semi-solid state
EJ Zoqui et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Semisolid strip casting using a twin roll caster equipped with a cooling slope
T Haga
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Time-resolved X-ray imaging of aluminum alloy solidification processes
RH Mathiesen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2002)
Semisolid metal processing
Z Fan
INTERNATIONAL MATERIALS REVIEWS (2002)
Mechanical stir casting of aluminium alloys from the mushy state: process, microstructure and mechanical properties
D Brabazon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Morphological evolution of SSM A356 during partial remelting
EJ Zoqui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Casting of aluminum alloy ingots for thixoforming using a cooling slope
T Haga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Effects and mechanisms of grain refinement in aluminium alloys
KT Kashyap et al.
BULLETIN OF MATERIALS SCIENCE (2001)
Eutectic nucleation and growth in hypoeutectic Al-SI alloys at different strontium levels
AK Dahle et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Evolution of near-equiaxed microstructure in the semisolid state
E Tzimas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
分享论文
