☆ 4.7 Article

An integrated framework via key-spectrum entropy and statistical properties for bearing dynamic health monitoring and performance degradation assessment

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Automation & Control Systems

Data-Model Combined Driven Digital Twin of Life-Cycle Rolling Bearing

Yi Qin et al.

Summary: This article proposes a digital twin model of life-cycle rolling bearing driven by the combination of data and model. By using measured signals and the bearing fault dynamic model, the size and evolution law of bearing defects can be estimated. These information is then introduced into the bearing dynamic model in virtual space, and finally the data in virtual space is mapped to the corresponding data in physical space using an improved neural network.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Real-time identification of performance degradation stages of rolling element bearings by RVCFI

Jiadong Meng et al.

Summary: This study proposes a method based on multi-dimensional feature fusion to determine the initial fault time and performance degradation stages of a bearing in real time. By monitoring the variation coefficient and its rate of the monitoring indicators, the proposed method can efficiently identify the faults and degradation stages of the bearing. The adaptivity and versatility of the multi-resolution singular value decomposition algorithm are also improved.

MEASUREMENT SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Bearing incipient fault feature extraction using adaptive period matching enhanced sparse representation

Renhe Yao et al.

Summary: In this paper, an adaptive period matching enhanced sparse representation (APMESR) algorithm is proposed to effectively extract incipient bearing fault features. The algorithm utilizes a novel methodology for estimating the period of faulty impulses and employs maximal overlap discrete wavelet packet transform for noise reduction and highlighting periodic impulse signatures. Experimental results demonstrate the superiority of APMESR in comparison to other advanced methods.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Interpretable online updated weights: Optimized square envelope spectrum for machine condition monitoring and fault diagnosis

Bingchang Hou et al.

Summary: This paper studies the integration of online monitoring data with cyclostationarity of fault transients to construct a fault cyclostationarity-based convex optimization model. An online weight updating algorithm is developed to make the weight updating of the proposed optimization model adaptive to online monitoring data. Interpretable online updated weights are proposed as an optimized square envelope spectrum (OSES) to enhance the identification of fault characteristic frequency (FCF) and its harmonics. A three-dimensional (3D) OSES and a detector with an alarming threshold are designed to achieve incipient fault time detection, fault type diagnosis, and online fault evolution monitoring. The effectiveness and superiority of this approach are validated using practical bearing datasets and experimental run-to-failure datasets.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Industrial

State-space modeling and novel entropy-based health indicator for dynamic degradation monitoring of rolling element bearing

Anil Kumar et al.

Summary: This work focuses on establishing a state-space model combined with a novel probabilistic entropy-based health indicator, aiming to assess the dynamic degradation monitoring and estimation of remaining useful life (RUL) of rolling element bearings. The proposed entropy-based health indicator is less sensitive to high probabilistic distribution data, making it suitable for different load and speed conditions. Experimental results show that the entropy-based state space model outperforms existing models in estimating RUL and carrying out dynamic degradation monitoring.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Article Automation & Control Systems

An Integrated Approach for Bearing Health Indicator and Stage Division Using Improved Gaussian Mixture Model and Confidence Value

Mao He et al.

Summary: This article proposes an integrated approach for assessing bearing performance degradation, including an improved clustering algorithm and a new health indicator. Experimental results show that this approach can successfully distinguish different health states, damage severities, and working conditions of bearings, accurately identifying the level of degradation.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Novel sparse representation degradation modeling for locating informative frequency bands for Machine performance degradation assessment

Tongtong Yan et al.

Summary: Performance degradation assessment (PDA) is an intersection technology of machine condition monitoring, degradation evaluation, and fault diagnosis in condition-based maintenance (CBM). This paper proposes a novel sparse representation degradation modeling methodology that integrates sparse representation and monotonic degradation modeling to enrich PDA.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Acoustics

Bearing performance degradation assessment based on topological representation and hidden Markov model

Ran Wang et al.

Summary: A bearing performance degradation assessment method based on topological representation and hidden Markov model is proposed in this study, which can accurately evaluate the degradation tendency of bearings and effectively detect the initial degradation by constructing a robust and representative feature space. The proposed method demonstrates a smoother and more accurate degradation tendency compared to peer methods, as well as accurate identification of initial degradation.

JOURNAL OF VIBRATION AND CONTROL (2021)

添加到收藏夹

Article Automation & Control Systems

Selection of efficient degradation features for rolling element bearing prognosis using Gaussian Process Regression method

Prem Shankar Kumar et al.

Summary: This paper proposes a prediction model for rolling element bearing fault or degradation trends using GPR, analyzing various kernel functions and introducing a hybrid metric for feature selection. The findings suggest that entropy features outperform statistical features in predicting bearing degradation trends.

ISA TRANSACTIONS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Research on a rolling bearing health monitoring algorithm oriented to industrial big data

Wenchang Zhu et al.

Summary: The RMT-PCA method utilizes rolling bearing health monitoring data to build a random matrix model, extracting 14 feature indices and constructing a fusion feature index through PCA algorithm to assess bearing degradation. Experimental results demonstrate that the RMT-PCA algorithm is more sensitive to early anomalies and accurately reflects the actual degradation process of the bearing.

MEASUREMENT (2021)

添加到收藏夹

Article Automation & Control Systems

Periodicity-enhanced sparse representation for rolling bearing incipient fault detection

Renhe Yao et al.

Summary: This paper presents a periodicity-enhanced sparse representation method for incipient fault detection of rolling bearings. By defining fault proportion and designing a periodicity-decision criterion for optimal potential fault period, the method demonstrates excellent performance in simulations and experimental verifications.

ISA TRANSACTIONS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Oscillation based permutation entropy calculation as a dynamic nonlinear feature for health monitoring of rolling element bearing

Khandaker Noman et al.

Summary: This paper presents a PE calculation method based on tunable Q factor wavelet transform, which quantifies the health status of bearings by separating the fundamental signal component of bearing signals using an oscillation-based approach. Experimental results demonstrate that this oscillation-based PE method provides better performance in dynamic bearing health monitoring compared to traditional PE application.

MEASUREMENT (2021)

添加到收藏夹

Review Thermodynamics

Sounds and acoustic emission-based early fault diagnosis of induction motor: A review study

Omar AlShorman et al.

Summary: The study reviews the research on condition monitoring and fault diagnosis based on sound and AE, focusing on four types of faults: bearings, rotor, stator, and compound. It analyzes the advantages and limitations of using sound and AE analysis in CM and FD, while addressing the challenges and future directions for AE-based CM and FD in rotating machinery, particularly for induction motors.

ADVANCES IN MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Degradation assessment of bearing based on machine learning classification matrix

Satish Kumar et al.

Summary: The ultimate goal of bearing condition monitoring is to evaluate different degradation states and estimate the quantitative analysis of degree of performance degradation, machine learning classification matrices play a key role in model training. Previous research has used diagnostic and prognostic models based on a data-driven perspective to improve bearing degradation assessment, with Industry 4.0 driving research on advanced diagnostic and prognostic algorithms to enhance model accuracy.

EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY (2021)

添加到收藏夹

Article Engineering, Mechanical

Investigations on quasi-arithmetic means for machine condition monitoring

Bingchang Hou et al.

Summary: This paper investigates the use of quasi-arithmetic means (QAMs) and sparsity measures for constructing a health index for machine condition monitoring. Experimental results demonstrate that the proposed framework can detect faults, exhibit degradation tendencies, and be robust to impulsive noises, outperforming existing sparsity measures.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Health condition monitoring of machines based on long short-term memory convolutional autoencoder

Zhuang Ye et al.

Summary: Machine health assessment is crucial for prognostics and health management, and the proposed LSTMCAE demonstrates effectiveness in feature learning and generating health index using multivariate Gaussian distribution. Experimental results show the superiority of LSTMCAE in machine health assessment compared to other unsupervised learning methods.

APPLIED SOFT COMPUTING (2021)

添加到收藏夹

Review Engineering, Mechanical

Challenges and Opportunities of AI-Enabled Monitoring, Diagnosis & Prognosis: A Review

Zhibin Zhao et al.

Summary: This paper provides a systematic overview of the current development, common technologies, open source datasets, codes, and challenges of AI-enabled PHM methods, with a focus on the importance of an open source community, including open source datasets and codes.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Health Assessment and Remaining Useful Life Prediction of Wind Turbine High-Speed Shaft Bearings

Zhenen Li et al.

Summary: The paper proposes a method to assess the health status and predict the remaining useful life of wind turbine high-speed shaft bearings by extracting degradation features of HSSBs and constructing a comprehensive evaluation function, as well as using SOM network to build a health indicator curve.

ENERGIES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Predicting Remaining Useful Life of Rolling Bearings Based on Reliable Degradation Indicator and Temporal Convolution Network with the Quantile Regression

Qiaoping Tian et al.

Summary: High precision and multi-information prediction results for bearing remaining useful life (RUL) effectively describe the uncertainty of bearing health and operation states. A new feature vector based on time-frequency domain joint features is proposed for comprehensive description of bearing degradation process. Experimental results demonstrate that the proposed method can achieve smaller errors in point predictions and construct more accurate prediction intervals and probability density curves compared to existing methods.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Engineering, Mechanical

A new method for the estimation of bearing health state and remaining useful life based on the moving average cross-correlation of power spectral density

Lang Xu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Novel Health Indicator Based on Information Theory Features for Assessing Rotating Machinery Performance Degradation

Akhand Rai et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Mechanical

A feature fusion-based prognostics approach for rolling element bearings

Ugochukwu Ejike Akpudo et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Bearing fault detection and recognition methodology based on weighted multiscale entropy approach

Amrinder Singh Minhas et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Constructing a Reliable Health Indicator for Bearings Using Convolutional Autoencoder and Continuous Wavelet Transform

Mohammadreza Kaji et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Automation & Control Systems

An integrated framework for statistical change detection in running status of industrial machinery under transient conditions

Guangyuan Chen et al.

ISA TRANSACTIONS (2019)

添加到收藏夹

Article Engineering, Mechanical

A statistical methodology for the design of condition indicators

Jerome Antoni et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Review Engineering, Mechanical

A review on data-driven fault severity assessment in rolling bearings

Mariela Cerrada et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

A Frequency-Weighted Energy Operator and complementary ensemble empirical mode decomposition for bearing fault detection

Yacine Imaouchen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

添加到收藏夹

Article Engineering, Mechanical

Fast computation of the spectral correlation

Jerome Antoni et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

添加到收藏夹

Article Automation & Control Systems

A Two-Stage Data-Driven-Based Prognostic Approach for Bearing Degradation Problem

Yu Wang et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2016)

添加到收藏夹

Article Engineering, Mechanical

The infogram: Entropic evidence of the signature of repetitive transients

Jerome Antoni

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

添加到收藏夹

Article Engineering, Mechanical

A descriptive model of wear evolution in rolling bearings

Idriss El-Thalji et al.

ENGINEERING FAILURE ANALYSIS (2014)

添加到收藏夹

Article Statistics & Probability

Optimal Detection of Changepoints With a Linear Computational Cost

R. Killick et al.

JOURNAL OF THE AMERICAN STATISTICAL ASSOCIATION (2012)

添加到收藏夹

Article Engineering, Mechanical

Spectral entropy: a complementary index for rolling element bearing performance degradation assessment

Y. N. Pan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2009)

添加到收藏夹

Article Engineering, Biomedical

Characterization of surface EMG signal based on fuzzy entropy

Weiting Chen et al.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2007)

添加到收藏夹

Article Engineering, Mechanical

Fast computation of the kurtogram for the detection of transient faults

Jerome Antoni

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)

添加到收藏夹

Article Acoustics

Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics

H Qiu et al.

JOURNAL OF SOUND AND VIBRATION (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.