☆ 4.7 Article

Multi-level curvature-based parametrization and model updating using a 3D full-field response

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Characterizing dynamic deformation of marine propeller blades with stroboscopic stereo digital image correlation

Zhilong Su et al.

Summary: The stereo digital image correlation (stereo-DIC) technique demonstrates potential in characterizing 3D dynamic deformation of underwater rotor blades by tackling challenges in underwater applications. Improved methods are proposed for calibration and refraction 3D reconstruction, showing the feasibility and accuracy of the system and techniques for monitoring underwater rotating structures.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

3D vibrations reconstruction with only one camera

Franck Renaud et al.

Summary: This paper introduces a new method for measuring vibrations of a 3D mechanical structure using a single camera and Finite Element model. By comparing the motion captured by the camera and the motion of the Finite Element model at the same location, the time evolution of modal amplitudes can be inferred and the vibration amplitude can be magnified.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Bayesian model updating and class selection of a wing-engine structure with nonlinear connections using nonlinear normal modes

Mingming Song et al.

Summary: This paper introduces a Bayesian approach for model updating and class selection based on nonlinear normal modes (NNMs) and demonstrates its effectiveness on a wing-engine structure. By experimentally measuring NNMs and using a two-phase Bayesian framework, the most plausible model is selected after updating model parameters. The proposed method shows good agreement between predicted and identified NNMs, verifying its effectiveness for nonlinear model updating and class selection.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Full-field DIC-based model updating for localized parameter identification

Klemen Zaletelj et al.

Summary: High-speed-camera measurements offer high spatial density but low dynamic range response, while accelerometer measurements provide low-spatial-density modal shapes with high dynamic range.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Value of information from vibration-based structural health monitoring extracted via Bayesian model updating

Antonios Kamariotis et al.

Summary: The paper introduces a method of quantifying the value of information extracted from a structural health monitoring system based on the Bayesian decision analysis framework. By modeling in detail the entire process from data generation to processing, model updating, and reliability calculation, the framework is shown to provide quantitative measures on the optimality of an SHM system in a specific decision context.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Measurement and identification of the nonlinear dynamics of a jointed structure using full-field data, Part I: Measurement of nonlinear dynamics

Wei Chen et al.

Summary: This research aims to extend traditional experimental methods for linear system identification to nonlinear jointed systems by augmenting them with full-field data collected by high-speed videography. The study uses Digital Image Correlation to analyze the spatial-temporal dynamic characteristics of the system, introducing new sources of experimental error.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Structural vibration mode identification from high-speed camera footages using an adaptive spatial filtering approach

Miaoshuo Li et al.

Summary: High-speed camera-based modal analysis is a feasible and acknowledged approach for full-field vibration measurements. A novel adaptive spatial filtering algorithm is proposed in this paper to extract displacement signals, improving the signal-to-noise ratio and computational efficiency without using additional sensors. This method paves a way for broadening the applications of using high-speed camera for full-field vibration measurements.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Bayesian updating and identifiability assessment of nonlinear finite element models

Mukesh K. Ramancha et al.

Summary: This paper introduces Bayesian model updating and identifiability analysis of nonlinear FE models for civil structures, using Pine Flat concrete gravity dam as an example. Both recursive mode with unscented Kalman filter (UKF) and batch mode with transitional Markov chain Monte Carlo (TMCMC) method are used for model updating. Identifiability and sensitivity analyses are performed using local and global methods.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Laser-light speckle formation for deflection-shape identification using digital image correlation

Klemen Zaletelj et al.

Summary: The proposed method utilizes laser-light interference to form a speckle pattern for DIC measurements without modifying the surface of the structure, with speckle size depending on factors such as surface roughness.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Engineering, Mechanical

Still-camera multiview Spectral Optical Flow Imaging for 3D operating-deflection-shape identification

Domen Gorjup et al.

Summary: Image-based displacement measurement methods have been widely recognized for their practical advantages, and advances in high-speed imaging technology and video processing have helped overcome many shortcomings. Multi-camera measurements can improve signal-to-noise ratio, while identifying displacements in the frequency domain directly on the camera sensor can significantly reduce data sizes and post-processing times.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Construction & Building Technology

Sensitivity-based singular value decomposition parametrization and optimal regularization in finite element model updating

Daniel T. Bartilson et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Model updating of uncertain parameters of carbon/epoxy composite plates using digital image correlation for full-field vibration measurement

M. Cuadrado et al.

MEASUREMENT (2020)

添加到收藏夹

Article Acoustics

Full field optical measurements in experimental modal analysis and model updating

Alessandro Zanarini

JOURNAL OF SOUND AND VIBRATION (2019)

添加到收藏夹

Article Engineering, Mechanical

Full-field finite element model updating using Zernike moment descriptors for structures exhibiting localized mode shapes

Jun Wei Ngan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Frequency domain triangulation for full-field 3D operating-deflection-shape identification

Domen Gorjup et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Finite element model updating using objective-consistent sensitivity-based parameter clustering and Bayesian regularization

Daniel T. Bartilson et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals

Bing Pan

MEASUREMENT SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Mechanical

High frequency modal identification on noisy high-speed camera data

Jaka Javh et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Acoustics

Experimental modal analysis on full-field DSLR camera footage using spectral optical flow imaging

Jaka Javh et al.

JOURNAL OF SOUND AND VIBRATION (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review of Speckle Pattern Fabrication and Assessment for Digital Image Correlation

Y. L. Dong et al.

EXPERIMENTAL MECHANICS (2017)

添加到收藏夹

Article Engineering, Mechanical

Model updating of a full-scale FE model with nonlinear constraint equations and sensitivity-based cluster analysis for updating parameters

Jinwoo Jang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

添加到收藏夹

Review Engineering, Mechanical

Dealing with uncertainty in model updating for damage assessment: A review

Ellen Simoen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)

添加到收藏夹

Proceedings Paper Computer Science, Interdisciplinary Applications

Umbrella curvature: a new curvature estimation method for point clouds

A. Foorginejad et al.

7TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING (INTER-ENG 2013) (2014)

添加到收藏夹

Article Acoustics

Frequency-based structural modification for the case of base excitation

Martin Cesnik et al.

JOURNAL OF SOUND AND VIBRATION (2013)

添加到收藏夹

Article Acoustics

Finite element model updating from full-field vibration measurement using digital image correlation

Weizhuo Wang et al.

JOURNAL OF SOUND AND VIBRATION (2011)

添加到收藏夹

Article Engineering, Mechanical

3D digital image correlation methods for full-field vibration measurement

Mark N. Helfrick et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

添加到收藏夹

Article Acoustics

Clustering of parameter sensitivities: Examples from a helicopter airframe model updating exercise

H. Shahverdi et al.

SHOCK AND VIBRATION (2009)

添加到收藏夹

Article Engineering, Mechanical

An improved updating parameter selection method and finite element model update using multiobjective optimisation technique

GH Kim et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2004)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A flexible new technique for camera calibration

ZY Zhang

IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.