相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。CNT-reinforced Al-xZr (x=0.25, 0.5 and 1 wt.%) surface composites fabricated by friction stir processing: microstructural, mechanical and wear characterisation
M. Reihanian et al.
PHILOSOPHICAL MAGAZINE (2022)
Influence of the Solution and Artificial Aging Treatments on the Microstructure and Mechanical Properties of Die-Cast Al-Si-Mg Alloys
Ho-Jung Kang et al.
METALS (2022)
Effect of Heat Treatment on Mechanical Properties of Er-, Dy-, and Eu-Modified A356 Alloy
Onur Ernam et al.
LIGHT METALS 2022 (2022)
Microstructure and Impression Creep Behavior of Al-7Si-0.3Mg Alloy with Zr Addition
M. Reihanian et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Effect of Rare Earth Er on Microstructure and Creep Behavior of Al-7Si-0.3Mg Alloy
S. Rashno et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Effect of erbium on the rheocast quality index of A356 semisolid feedstock
Chaiyawat Peeratatsuwan et al.
MATERIALS SCIENCE AND TECHNOLOGY (2021)
Thermal stability and precipitate microstructures of Al-Si-Mg-Er alloy
Yi He et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)
Effects of Er and Zr Additions on the As-Cast Microstructure and on the Solution-Heat-Treatment Response of Innovative Al-Si-Mg-Based Alloys
M. Colombo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Microstructural changes induced by Er and Zr additions to A356 alloy investigated by thermal analyses and STEM observations
M. Colombo et al.
MATERIALS CHARACTERIZATION (2020)
Effect of Zr on microstructure and mechanical properties of the Al-Cu-Er alloy
S. M. Amer et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Effect of Impurities on the Phase Composition and Properties of a Wrought Al-6% Cu-4.05% Er Alloy
S. M. Amer et al.
PHYSICS OF METALS AND METALLOGRAPHY (2020)
Tensile and creep properties of Al-7Si-0.3Mg alloy with Zr and Er addition
S. Rashno et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Impression creep characterization of cast Al-7Si-0.3Mg alloy
S. Rashno et al.
MATERIALS RESEARCH EXPRESS (2019)
Evolution of Microstructure and Mechanical Properties of a New Al-Cu-Er Wrought Alloy
A. Pozdnyakov et al.
PHYSICS OF METALS AND METALLOGRAPHY (2019)
Heat-treatment studies on mechanical and reciprocating wear behaviour of functionally graded A356 alloy
R. Jojith et al.
MATERIALS RESEARCH EXPRESS (2019)
Influences of different Zr additions on the microstructure, room and high temperature mechanical properties of an Al-7Si-0.4Mg alloy modified with 0.25%Er
Marco Colombo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Precipitation hardening in dilute Al-Zr alloys
Pedro Henrique Lamarao Souza et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)
Effect of Erbium-Zirconium Composite Modifications on the Microstructure and Mechanical Properties of A356 Aluminum Alloy
Liantao Ji et al.
HIGH PERFORMANCE STRUCTURAL MATERIALS (2018)
Microstructural evolution and mechanical properties of Al-7Si-0.3Mg alloys with erbium additions
P. Pandee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Er addition to Al-Si-Mg-based casting alloy: Effects on microstructure, room and high temperature mechanical properties
Marco Colombo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of Zircon Particle Size on Age Hardening Behavior of A356 Alloy Based Composites
T. Satish Kumar et al.
METAL SCIENCE AND HEAT TREATMENT (2017)
Phase-field modeling of twin-related faceted dendrite growth of silicon
G. Y. Chen et al.
ACTA MATERIALIA (2016)
Modification of eutectic Si in Al-Si alloys with Eu addition
J. H. Li et al.
ACTA MATERIALIA (2015)
Effect of Sc addition on the microstructure and wear properties of A356 alloy and A356-TiB2 in situ composite
S. L. Pramod et al.
MATERIALS & DESIGN (2015)
Combining effects of TiB2 and La on the aging behavior of A356 alloy
Tongmin Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of erbium modification on the microstructure and mechanical properties of A356 aluminum alloys
Z. M. Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Nucleation kinetics of entrained eutectic Si in Al-5Si alloys
J. H. Li et al.
ACTA MATERIALIA (2014)
Application of cast Al-Si alloys in internal combustion engine components
Mousa Javidani et al.
INTERNATIONAL MATERIALS REVIEWS (2014)
The Effect of Heat Treatment and Aging Process on Microstructure and Mechanical Properties of A356 Aluminium Alloy Sections in Casting
K. T. Akhil et al.
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014) (2014)
Nano-sized aluminum oxide reinforced commercial casting A356 alloy matrix: Evaluation of hardness, wear resistance and compressive strength focusing on particle distribution in aluminum matrix
M. Karbalaei Akbari et al.
COMPOSITES PART B-ENGINEERING (2013)
Precipitation evolution in Al-Er-Zr alloys during aging at elevated temperature
S. P. Wen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Effects of the Delay Between Quenching and Aging on Hardness and Tensile Properties of A356 Aluminum Alloy
Lorella Ceschini et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
The negative effect of solution treatment on the age hardening of A356 alloy
H. C. Long et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Impact of grain size on mechanical properties of AlSi7Mg0.3 alloy
Yucel Birol
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Evolution, microhardness of ZrAlSi intermetallic and its impact on the elevated-temperature properties in Al-Si alloys
Gao Tong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Precipitation hardening of cast Zr-containing A356 aluminium alloy
B. Baradarani et al.
MATERIALS & DESIGN (2011)
General relationship between strength and hardness
P. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effect of heat treatment on microstructure and tensile properties of A356 alloys
Peng Ji-hua et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
Heat treatment effect on the microstructure, tensile properties and dry sliding wear behavior of A356-10%B4C cast composites
H. R. Lashgari et al.
MATERIALS & DESIGN (2010)
Effect of grain refinement and modification on the dry sliding wear behaviour of eutectic Al-Si alloys
T. M. Chandrashekharaiah et al.
TRIBOLOGY INTERNATIONAL (2009)
Precipitation evolution in Al-Zr and Al-Zr-Ti alloys during aging at 450-600 °C
Keith E. Knipling et al.
ACTA MATERIALIA (2008)
Natural and artificial aging response of semisolid metal processed Al-Si-Mg alloy A356
H. Moeller et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2007)
Criteria for developing castable, creep-resistant aluminum-based alloys - A review
KE Knipling et al.
ZEITSCHRIFT FUR METALLKUNDE (2006)
An overview of the development of Al-Si-alloy based material for engine applications
HZ Ye
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2003)
Influence of iron on castability and properties of aluminium silicon alloys: literature review
TO Mbuya et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2003)