☆ 4.7 Article

Microstructure and strengthening mechanism of TIG welded joints of a Mg-Nd-Gd alloy: Effects of heat input and pulse current

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Heat generation, plastic deformation and residual stresses in friction stir welding of aluminium alloy

Omar S. Salih et al.

Summary: This study developed a novel three-dimensional fully coupled thermo-mechanical finite element model based on the Coupled Eulerian-Lagrangian approach to simulate the friction stir welding (FSW) process. The model successfully captured the evolution of temperature, plastic deformation, and residual stresses and was validated with experimental testing. The results revealed that the tool rotation speed significantly influenced temperature evolution and plastic deformation, with higher plastic deformation resulting in improved weld quality.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of heat treatment on the stress corrosion cracking behavior of cast Mg-3Nd-3Gd-0.2Zn-0.5Zr alloy in a 3.5 wt% NaCl salt spray environment

Fangzhou Qi et al.

Summary: The study found that in a 3.5% NaCl environment, the T4 heat-treated alloy exhibited the lowest corrosion rate and SCC susceptibility index, indicating the best corrosion resistance and SCC resistance performance.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure characterization and texture evolution of Ti-6Al-4V cladding layer fabricated by alterative current assisted TIG

Yanqin Huang et al.

Summary: This paper investigates the effect of alternating current on the Ti-6Al-4V cladding layers. The results show that the addition of AC can inhibit grain growth and enhance the uniformity of the microstructure.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Properties and Microstructure Evolution of Mg-Gd Alloy during Aging Treatment

Yi Liu et al.

Summary: In this work, the evolution of precipitations in a Mg-10Gd alloy was systematically studied based on atomic-scaled TEM and HAADF-STEM observations. The transition mechanism from G.P. Zone to beta, beta', beta(T) and beta(M) was proposed, along with their relationships with mechanical properties. The blocking effect of precipitations significantly improved the strength, according to the Orowan mechanism. The elliptic cylinder shaped beta' phase with a base-centered orthorhombic lattice structure provided significant strengthening effects, enhancing the hardness and ultimate tensile strength.

METALS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and mechanical properties of repair welds of low-pressure sand-cast Mg-Y-RE-Zr alloy by tungsten inert gas welding

Xin Tong et al.

Summary: This study examined the feasibility of repairing sand-cast Mg-4Y-3RE-0.5Zr alloy using tungsten inert gas (TIG) welding at different welding currents. The results showed that defect-free and visually pleasing repaired joints could be achieved at 170 and 190 A. The tensile strength, joint efficiency, and elongation of the repaired joint reached high levels. However, at currents above 190 A, serious defects in the heat-affected zone resulted in a weakening of the joint.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

添加到收藏夹

Article Engineering, Industrial

Investigation on joining high borated stainless steels through electron beam welding technology

Zhao-Jie Wang et al.

Summary: In this study, electron beam welding was used to join high borated stainless steels, producing weld joints with excellent mechanical properties. The research revealed that increasing boron content led to narrower partially molten zones, with larger boride volume fraction and size enhancing strength but reducing ductility.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Industrial

The mechanisms of underwater wet flux-cored arc welding assisted by ultrasonic frequency pulse high-current

Ji Chen et al.

Summary: An ultrasonic frequency pulse high-current (UFPHC) was used to improve the stability and appearance of underwater wet flux-cored arc welding. The UFPHC effectively suppressed arc extinguishing phenomenon, reduced spatter on the workpiece, and improved weld quality, while also reducing the hardness of the heat-affected zone.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Role of Y on the microstructure and mechanical properties of Mg-Gd-Zr alloy

Bin Lei et al.

Summary: Increasing the Y content in Mg-4Gd-0.5Zr alloy can effectively refine the grain size, reduce the texture intensity, enhance the ductility, and increase the yield strength of the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancing the mechanical properties in the weld nugget zone of friction stir welded 2195 Al-Li alloy joint via superimposing ultrasonic vibration

Chunyan Tian et al.

Summary: The joint properties of third-generation Al-Li alloys can be enhanced by ultrasonic vibration enhanced friction stir welding. The mechanical properties of the weld nugget zone are improved by refining the grain size, increasing the dislocation density, and enhancing the nucleation and growth of precipitates.

VACUUM (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Analysis of the response of thermal-affect and multiplex strengthening mechanisms of Mg-10Gd electron beam welded joint

Yaorui Ma et al.

Summary: Defect-free Mg-10Gd alloy welded joints with high tensile strength were obtained via electron beam weld. The microstructure of joints under different heat inputs was inconsistent. The fusion zone maintained high strength while softening occurred in the heat-affected zone, leading to fractures. Multiple strengthening mechanisms existed in the as-weld joint, with varying ratios in different regions.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Exceptional grain refinement of Mg-Zr master alloy treated by tungsten inert gas arc re-melting with ultra-high frequency pulses

Xin Tong et al.

Summary: The distribution of Zr in a commercial Mg-30Zr master alloy can be modified through tungsten inert gas arc re-melting with ultra-high frequency pulses, leading to a substantial reduction in grain size. The approach allows for refinement of Zr particle size and obtaining higher contents of soluble Zr and nanoscale Zr particles. This new method proposes a new approach to the design and fabrication of high-efficiency grain refiners.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

An investigation into wire arc additive manufacturing of Mg-Y-RE-Zr alloy

Qiman Wang et al.

Summary: Mg-4Y-3RE-0.5Zr alloy was successfully fabricated using wire arc additive manufacturing (WAAM), and no oxidation inclusion defect, which is commonly observed in Y-containing Mg alloys prepared by laser powder bed fusion (LPBF), was found. However, microstructural inhomogeneity along the building height was observed due to the different cooling rates of different deposited layers and subsequent multiple thermal cycles (MTCs).

MATERIALS LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of fast-frequency pulsed waveforms on the microstructure and mechanical properties of Ti-6Al-4V alloy welded by FFP-TIG

Jianwen Wu et al.

Summary: The FFP-TIG welding technology reduces the grain coarsening of Ti-6Al-4V weldments, resulting in improved mechanical properties. Compared with conventional TIG, FFP-TIG welding technology can achieve higher reliability for titanium alloy weldments.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and fracture behavior of dissimilar friction stir welding of 1060Al alloy to AZ31B Mg alloy

Yadong Zhao et al.

Summary: This paper investigates the microstructure evolution and fracture behavior of 1060 Al/AZ31B Mg dissimilar friction stir welded joints. It is found that welding speed significantly affects the mechanical properties and fracture modes of the joints.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure evolution and strengthening mechanisms of Mg-6Gd-4Y-0.5Zn-0.5Zr alloy during hot spinning and aging treatment

Xueze Jin et al.

Summary: The study investigates the optimized spinning temperature range of Mg-6Gd-4Y-0.5Zn-0.5Zr alloy and the microstructure evolution and strengthening mechanisms during hot spinning and aging treatment. The research shows that the multi-pass heating and deformation during hot spinning influence the microstructure and the dominant strengthening mechanisms include solid solution strengthening, grain boundary strengthening, and shearing strengthening. The precipitation of gamma' phase affects the precipitation density of beta' phase and reduces the age hardening response in spun tube compared to extruded alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Simultaneously enhanced strength and ductility of TIG welds in Inconel 718 super-alloy via ultrasonic pulse current

Yajie Wang et al.

Summary: This paper introduces a novel self-induced ultrasonic arc welding technology, which not only improves the tensile strength and ductility of Inconel 718 super-alloy TIG welds, but also enhances welding efficiency. The ultrasonic pulse current is found to reduce the content of Laves phase and refine the grains in the weld metal, leading to improved ductility of the welds.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of arc constriction current frequency on tensile properties and microstructural evolution of tungsten inert gas welded thin sheets of aerospace alloy

Tushar Sonar et al.

Summary: The investigation focused on studying the influence of arc constriction current frequency (ACCF) on the tensile properties and microstructural evolution of aerospace Alloy 718 sheets joined by constricted arc TIG (CA-TIG) welding process. Results showed that ACCF of 4 kHz led to superior tensile properties while ACCF above 12 kHz caused severe grain growth and evolution of coarser Laves phase in fusion zone. Alloy 718 welds exhibited more obvious Nb segregation and Laves phase formation at higher levels of ACCF, ultimately reducing the tensile properties of joints.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

High cycle fatigue behavior and mechanical performance of a novel sand-cast Mg-Nd-Gd alloy: Effect of heat treatment

Fangzhou Qi et al.

Summary: In this study, the effect of heat treatment on a novel sand-cast Mg-3Nd-2.6Gd-0.2Zn-0.5Zr alloy was evaluated, showing significant improvements in microstructure and mechanical properties after optimized solution treatment and peak-aged condition. The high cycle fatigue properties were found to be influenced by heat treatment conditions, with the peak-aged alloy showing the highest fatigue strength and a linear relationship with yield strength and ultimate tensile strength.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Research on the post-weld heat treatment of TIG repair welded joint of sand-cast Mg-Y-RE-Zr alloy

Guoqing Zhang et al.

Summary: This study investigated the microstructural evolution of TIG repair welded joints and the effect of progressive solution treatments on grain coarsening. By proposing a two-step progressive T4 treatment method, abnormal grain coarsening was avoided while maintaining excellent comprehensive tensile properties. The progressive T4 treatment at lower temperatures effectively promoted the dissolution of eutectics and contributed to the aging hardening process by precipitating the evenly dispersed beta ' phase in the matrix.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Achieving low-temperature Zr alloying for microstructural refinement of sand-cast Mg-Gd-Y alloy by employing zirconium tetrachloride

Xin Tong et al.

Summary: This study explored the feasibility of Zr alloying in sand-cast GW83 alloy at a low temperature by applying ZrCl4, which resulted in higher Zr yield compared to using Mg-Zr master alloy. The interaction process between ZrCl4 and Mg melt, as well as the grain refinement mechanisms, were systematically studied. The addition of ZrCl4 led to a decrease in average grain size due to heterogeneous nuclei of Zr particles and constitutional supercooling provided by solute Zr, however, a higher addition of ZrCl4 resulted in the generation of RECl3 inclusions that degraded the mechanical properties of the alloy.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Eutectic phase strengthening and strain rate sensitivity behavior of AZ80 magnesium alloy

Lingbao Ren et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of dissimilar nickel-based superalloys resistance spot welds

M. Bemani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Understanding the refinement of grains in laser surface remelted Al-Cu alloys

M. N. Patel et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain refinement in laser remelted Mg-3Nd-1Gd-0.5Zr alloy

Duyao Zhang et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and quench sensitivity characterizations of Mg-9.5Gd-0.9Zn-0.5Zr alloy

Lei Xiao et al.

VACUUM (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Numerical investigation of grain refinement of magnesium alloys: Effects of cooling rate

Dong-Rong Liu et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2020)

添加到收藏夹

Review Engineering, Manufacturing

A review on high-frequency pulsed arc welding

Zhenmin Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Parameter Optimization of Gas Tungsten-Arc Repair Welding Technique in Mg-6Gd-3Y-0.5Zr Alloy

D. H. Meng et al.

INTERNATIONAL JOURNAL OF METALCASTING (2019)

添加到收藏夹

Article Crystallography

Effect of ultrasonic treatment on the alloying and grain refinement efficiency of a Mg - Zr master alloy added to magnesium at hypo- and hyper-peritectic compositions

B. Nagasivamuni et al.

JOURNAL OF CRYSTAL GROWTH (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Y and Gd content on the microstructure and mechanical properties of Mg-Y-RE alloys

Kang Luo et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

A review: Past, present and future of grain refining of magnesium castings

Erdem Karakulak

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Enhancing strength and creep resistance of Mg-Gd-Y-Zn-Zr alloy by substituting Mn for Zr

C. Xu et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and mechanical properties of TIG/A-TIG welded AZ61/ZK60 magnesium alloy joints

Bo Qin et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Additive manufacturing of ultrafine-grained high-strength titanium alloys

Duyao Zhang et al.

NATURE (2019)

添加到收藏夹

Article Chemistry, Physical

Refining the microstructure, modifying the texture and enhancing the toughness of AZ31B alloy rod by the extrusion and upsetting

Y. Yao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Engineering, Manufacturing

The transient behaviours of free surface in a fully penetrated weld pool in gas tungsten arc welding

Jiankang Huang et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

An effect of the rotation speed on microstructure and mechanical properties of the friction stir welded 2060-T8 Al-Li alloy

Huijie Liu et al.

MATERIALS CHARACTERIZATION (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain refining by ultrasonic stirring of the weld pool

Tao Yuan et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of heat treatment on microstructure, mechanical properties and fracture behaviors of sand-cast Mg-4Y-3Nd-1Gd-0.2Zn-0.5Zr alloy

Haohao Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the strain accommodation of β1 precipitates in magnesium alloy WE54

Z. Xu et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of zirconium additions on the corrosion of magnesium

D. S. Gandel et al.

CORROSION SCIENCE (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Improvement in grain refinement efficiency of Mg-Zr master alloy for magnesium alloy by friction stir processing

Chengqi Wang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ neutron diffraction and polycrystal plasticity modeling of a Mg-Y-Nd-Zr alloy: Effects of precipitation on individual deformation mechanisms

S. R. Agnew et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Interdependence model of grain nucleation: A numerical analysis of the Nucleation-Free Zone

Arvind Prasad et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of cooling rate on the microstructure and mechanical properties of sand-casting Mg-10Gd-3Y-0.5Zr magnesium alloy

Song Pang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

The role of crystallography and thermodynamics on phase selection in binary magnesium-rare earth (Ce or Nd) alloys

M. A. Easton et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation and evolution of the hardening precipitates in a Mg-Y-Nd alloy

G. Barucca et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Interdependence Theory: The relationship between grain formation and nucleant selection

D. H. StJohn et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of TiO2 coating on the microstructures and mechanical properties of tungsten inert gas welded AZ31 magnesium alloy joints

Linzhi Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of heat treatments on the microstructures and mechanical properties of Mg-3Nd-0.2Zn-0.4Zr (wt.%) alloy

Fu Penghuai et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties in cast magnesium-neodymium binary alloys

Jingli Yan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlation of microstructure with mechanical properties of TIG weldments of Ti-6Al-4V made with and without current pulsing

N. Kishore Babu et al.

MATERIALS CHARACTERIZATION (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain refinement of magnesium alloys by zirconium: Formation of equiaxed grains

M Qian et al.

SCRIPTA MATERIALIA (2006)

添加到收藏夹

Article Chemistry, Physical

A thermodynamic assessment of the Mg-Nd binary system using random solution and associate models for the liquid phase

S Gorsse et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hardening precipitation in a Mg-4Y-3RE alloy

C Antion et al.

ACTA MATERIALIA (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.