☆ 4.7 Article

Oxidation resistance behavior of SiC nanowires/Si layer on the C/SiC composites

MATERIALS CHARACTERIZATION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Failure mechanisms of (Gd0.9Yb0.1)2Zr2O7/Yb2SiO5/Si thermal/environmental barrier coatings during thermal exposure at 1300 °C/1400 °C

Wenbo Chen et al.

Summary: A novel tri-layer thermal and environmental barrier coatings were proposed for SiC-based ceramic matrix composites. The study revealed the oxidation behavior and failure mechanisms of the coatings at high temperatures, suggesting that defects like mud-cracks, cavities, and TGO channel cracks could cause delaminating failure at the interface.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Design of a new yttrium silicate Environmental Barrier Coating (EBC) based on the relationship between microstructure, transport properties and protection efficiency

S. Arnal et al.

Summary: The study reports on the corrosion resistance of yttrium silicate coatings with different microstructures in high temperature under different oxidizing environments and demonstrates the significant impact of microstructures on the coating properties. Recommendations for the design of an optimized yttrium silicate EBC with microstructural and compositional variations are proposed based on the findings.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cyclic oxidation and water vapor corrosion behaviors of multi-layer environmental barrier with HfO2-Si bond coat for SiCf/SiC

Gui Li et al.

Summary: The study focused on a novel environmental barrier coating for SiC ceramic substrates, showing that the coating exhibited better thermal shock resistance at lower temperatures, with the formation of HfSiO4 phase helping to alleviate phase change and crack initiation.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Significantly enhanced thermal shock resistance of α-Si3N4/O′-Sialon composite coating toughened by two-dimensional h-BN nanosheets on porous Si3N4 ceramics

Huichao Liu et al.

Summary: h-BN nanosheets were used to enhance the mechanical and thermal properties of alpha-Si3N4/O'-Sialon coating and improve its softening and toughening effects. The mechanisms of BNNSs improved the damage tolerance and toughness of the coating. The ultra-high thermal conductivity of BNNSs significantly improved the thermal diffusivity and conductivity of the coating, enhancing its thermal shock resistance.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Ceramics

Influences of SiC infiltration and coating on compressive mechanical behaviours of 2D C/SiC composites up to 1600? at wide-ranging strain rates

Chao Zhang et al.

Summary: The influences of SiC infiltration and coating on the compressive mechanical behaviors of 2D C/SiC composites were investigated. The compressive strength of the composites was highly sensitive to temperature, loading rate, and oxidation. SiC treated specimens exhibited higher compressive strengths in argon, while SiC coating improved the oxidation resistance of the composites in air.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Cyclic oxidation performances of new environmental barrier coatings of HfO2-SiO2/Yb2Si2O7 coated SiC at 1375?C and 1475?C in the air environment

Zhenya Zhang et al.

Summary: The objective of this study was to investigate the cyclic oxidation performances of environmental barrier coatings (EBCs) containing the novel HfO2-SiO2 bond coats in the air. The results showed that the HfSiO4 formed from the 50HfO2-50SiO2 bond coats had a higher content and remained intact, effectively protecting the SiC substrate at 1475℃.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Fatigue damage identification of SiC coated needled C/SiC composite by acoustic emission

Geng Hou et al.

Summary: This study monitored the fatigue damage process of SiC coated needled C/SiC composite specimen under tension-tension cyclic loading using acoustic emission (AE), revealing an enhancement of the Kaiser effect with increasing stable cycles. Cluster analysis of AE parameters identified four damage modes, providing insight into the characteristics of AE parameters at different damage stages. Additionally, the fracture morphology of the specimen was observed using scanning electron microscopy after fatigue fracture.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Improving the thermal expansion behavior and damping capacity of C/SiC composites by heat treatment

Kaiwen Shi et al.

Summary: The study suggests using heat treatment to optimize the coefficient of thermal expansion and damping capacity of 2D C/SiC composites. Results show that CTE can be adjusted within a wide range by controlling the heat treatment temperature, and introducing thermally-induced microcracking can improve the damping capacity of the composites.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A duplex bond coat approach to environmental barrier coating systems

Jeroen A. Deijkers et al.

Summary: SiC composites are vulnerable to volatilization of their protective SiO2 surface oxide in water vapor rich combustion environments, and are typically protected by a silicon bond coat and ytterbium disilicate (Yb2Si2O7: YbDS) environmental barrier coating system. A duplex silicon-HfO2 bond coat is investigated as a potential solution, which reduces the average SiO2 thickness and improves the durability of the coating system.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effect of deposition temperature on phase composition, morphology and mechanical properties of plasma-sprayed Yb2Si2O7 coating

Jingqi Huang et al.

Summary: The phase composition, microstructure, and mechanical properties of ytterbium disilicate coatings fabricated via atmospheric plasma spray at different deposition temperatures were studied. With increased deposition temperature, the crystallinity of the coatings significantly improved. Additionally, the coatings' mechanical properties were notably affected by the phase composition and microstructure.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Interface evolution of Si/Mullite/Yb2SiO5 PS-PVD environmental barrier coatings under high temperature

Xiaofeng Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical properties and microstructure of Yb2SiO5 environmental barrier coatings under isothermal heat treatment

Byung-Koog Jang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Erosion mechanism of ternary-phase SiC/ZrB2-MoSi2-SiC ultra-high temperature multilayer coating under supersonic flame at 90° angle with speed of 1400 m/s (Mach 4)

Alireza Abdollahi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hafnium silicate formation during oxidation of a permeable silicon + HfO2 powder composite system

Jeroen A. Deijkers et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure evolution and isothermal oxidation properties of c-AlPO4 and SiC whisker co-modified mullite coated SiC-C/SiC composites

Dongmei Pu et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Influence of low velocity impact on oxidation performance of SiC coated C/SiC composites

Leijiang Yao et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Effect of oxidation and residual stress on mechanical properties of SiC seal coated C/SiC composite

Manish Patel et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Physical

High temperature ablation-oxidation performance of SiC nanowhisker toughened-SiC/ZrB2-SiC ultra-high temperature multilayer coatings under supersonic flame

Alireza Abdollahi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Enhanced electromagnetic shielding property of C/SiC composites via electrophoretically-deposited CNTs onto SiC coating

Kun Yang et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

C/SiC Gradient Oxidation Protective Coating on Graphite by Modified Reactive Melt Infiltration Method: Effects of Processing Parameters on Transition Interface Thickness and High-Temperature Anti-oxidation Behavior

Alireza Abdollahi et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Response of ytterbium disilicate-silicon environmental barrier coatings to thermal cycling in water vapor

Bradley T. Richards et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure

Bradley T. Richards et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal shock resistance and isothermal oxidation behavior of C/SiC-SiCnano functionally gradient coating on graphite produced via reactive melt infiltration (RMI)

Alireza Abdollahi et al.

MATERIALS CHEMISTRY AND PHYSICS (2016)

添加到收藏夹

Article Chemistry, Physical

A SiC-ZrB2-ZrC coating toughened by electrophoretically-deposited SiC nanowires to protect C/C composites against thermal shock and oxidation

Lu Li et al.

APPLIED SURFACE SCIENCE (2015)

添加到收藏夹

Article Materials Science, Ceramics

Plasma spray deposition of tri-layer environmental barrier coatings

Bradley T. Richards et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.